User's Guide

ManualsBrandsACLARA ManualsElectronicsWireless MTU programmer

COMPANY CONFIDENTIAL

Wireless Field Programming Coil

Aclara Technologies, LLC

User Guide (DRAFT)

Rev. 1.3

Wireless Field Programming Coil

P/N: 109-6900

User Guide (DRAFT)

A product of

Aclara Technologies LLC

Confidential and Proprietary

PROPRIETARY NOTICE

The information contained in this document is private to Aclara Technologies LLC an Ohio

limited liability company (Aclara). This information may not be published, reproduced, or

otherwise disseminated without the express written authorization of Aclara.

Any software or firmware described in this document is furnished under a license and may be

used or copied only in accordance with the terms of such license.

DISCLAIMER

The information in this document is subject to change without notice and should not be

construed as a commitment by Aclara. Aclara assumes no responsibility for any errors that may

appear in this document.

No responsibility is assumed for the use or reliability of software on equipment that is not

supplied by Aclara.

TWACS, STAR and Metrum Cellular are registered trademarks of Aclara Technologies LLC.

Summary of content (10 pages)

PAGE 1
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Wireless Field Programming Coil P/N: 109-6900 User Guide (DRAFT) A product of Aclara Technologies LLC Confidential and Proprietary Copyright 2018 Aclara. All Rights Reserved. PROPRIETARY NOTICE The information contained in this document is private to Aclara Technologies LLC an Ohio limited liability company (Aclara).
PAGE 2
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Revisions Version 1.0 1.1 1.2 1.3 Rev. 1.
PAGE 3
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Table of Contents Warnings, Cautions and Notes ............................................................................................... 4 FCC/IC Compliance ........................................................................................................... 4 FCC/IC RF Exposure Guide ................................................................................................
PAGE 4
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Warnings, Cautions and Notes Always consult and adhere to all local and national safety codes, regulations, and standards. WARNING, CAUTION and Note statements are used throughout this manual to emphasize important and critical information to help you ensure safety and prevent product damage. These statements are defined below.
PAGE 5
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) This Class B digital apparatus complies with Canadian ICES-003. FCC/IC RF Exposure Guide Aclara Technologies LLC low power RF devices and their antennas must be fixed-mounted on indoor or outdoor permanent structure(s) providing a separation distance of at least 20 cm from all persons during normal operation.
PAGE 6
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Avertissements, Mises en garde et Remarques Toujours consulter et respecter les codes, règlements et normes de sécurité locaux et nationaux. Des AVERTISSEMENTS, MISES EN GARDE et remarques sont utilisés tout au long de ce guide pour souligner l'information importante et critique qui vous aidera à assurer la sécurité et à prévenir les dommages au produit. Ces énoncés sont définis ci-dessous.
PAGE 7
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) Cet appareil n'est pas conçu (et il n'a aucun branchement externe) pour être utilisé en association avec toute autre antenne ou tout transmetteur. Aucune autre instruction d'utilisation n'est requise pour assurer la conformité aux règles d'exposition aux RF.
PAGE 8
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) 1 MTU Programmer Device The following section describes the different steps for controlling and understanding the probe programmer, as well as the behavior of the leds in different situations. 1.1 Turn ON the programmer Turn on the programmer probe by pressing the button. The blue indicator will light. Wait until blue indicator starts blinking slowly and release the button. 1.
PAGE 9
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) 1.4 Battery indications LOW BATTERY If the device is ON and detects low battery, it will turn on the red indicator while the blue one will continue blinking. In this situation, PAIRING will not be allowed. When the device is in OFF state with low battery it will not allow to be turned ON and will be shown by blinking the red indicator five (5) times. Programmer updates will be neither allowed.
PAGE 10
Wireless Field Programming Coil COMPANY CONFIDENTIAL Aclara Technologies, LLC User Guide (DRAFT) 2 MTU Programmer Setup The following section outline the general procedure for placing the programmer at the time of reading or writing one MTU. 1. Turn on the device as indicated at 1.1. 2. Find the programmer point on the MTU. 3. Slide the programming probe onto the side of the MTU, so that the circular face of the programmer is flush against the programmer point on the MTU.