Acer Projector X1111/X1111H/X1111A/ X1211/X1211H/X1211S/X1211K/ X1213P/X1213PH/X1311KW/ X1313PW/X1313PWH Series User's Guide Downloaded From projector-manual.
Copyright © 2011. Acer Incorporated. All Rights Reserved. Acer Projector X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH Series User's Guide Original Issue: 8/2011 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.
vii Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding.
viii First Thing First Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the projector provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
First Thing First iii viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 Getting Started Connecting the Projector Turning the Projector On/Off 7 7 8 Turning On the Projector 8 Turning Off the Projector 9 Adjusting the Projected Image 10 Adjusting the Height of the Projected Image 10 How to Optimize Image Size and Distance 11 How to Get a Preferred Image Si
Appendices Troubleshooting 32 32 LED & Alarm Definition Listing 36 Replacing the Lamp 37 Ceiling Mount Installation 38 Specifications 41 Compatibility Modes 44 Regulations and safety notices Downloaded From projector-manual.
1 Product Features This product is a single-chip DLP® projector, including the following outstanding features: • DLP® technology • X1111/X1111H/X1111A: Native 800 x 600 SVGA resolution Auto / 4:3 / 16:9 aspect ratio supported X1211/X1211H/X1211S/X1211K/X1213P/X1213PH: Native 1024 x 768 XGA resolution Auto / 4:3 / 16:9 aspect ratio supported X1311KW/X1313PW/X1313PWH: Native 1280 x 800 WXGA resolution Auto/ Full / 4:3 /16:9 / L.
English 2 Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable Acer Projector Security Card Acer Projector This CD contains • User’s manual • Quick Start Guide • Acrobat® Reader® www.acer.
3 English Projector Overview Projector Outlook Front / upper side (X1211S) (X1111/X1111H/X1111A/X1211/ X1211H/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH) 1 1 5 5 6 6 7 7 2 2 3 3 8 4 8 4 # Description # Description 1 Control panel 5 Power key and Power indicator LED 2 Projection lens 6 Zoom ring 3 Elevator button 7 Focus ring 4 Lens cap 8 Remote control receiver Rear side (X1111A/X1211/X1211S/X1211K/X1213P/ X1311KW/X1313PW) (X1111H/X1211H/X1213PH/ X1313PWH) (X111
English 4 Control Panel 1 7 2 3 8 4 9 5 10 6 3 # Function Description 1 LAMP 2 IR Remote control receiver 3 Keystone Adjusts image distortion caused by tilting projection (±40 degrees). 4 RESYNC Automatically synchronizes the projector to the input source. 5 MENU • Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. • Confirms your selection of items.
5 (X1111H/X1111A/X1211/X1211H/X1211S/ X1213P/X1213PH/X1313PW/X1313PWH) (X1111/X1211K/ X1311KW) ENTER BACK SD/USB A HDMI/DVI LAN/WiFi # ENTER BACK PgUp PgUp PgDn PgDn SD/USB A HDMI/DVI LAN/WiFi USBB Function USBB Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 ASPECT RATIO To choose the desired aspect ratio. 3 ZOOM • Zooms the projector display in or out. • When a USB cable is connected, it performs the same function as the left mouse button.
English 6 # Function Description 10 HDMI™; HDMI™/DVI To change source to HDMI™ (or DVI) (for the model with HDMI™ or DVI connector). (For X1111H/X1211H/ X1213PH/X1313PWH) 11 Infrared transmitter Sends signals to the projector. 12 Empowering key Enables unique Acer functions: eView, eTimer, ePower Management. 13 FREEZE • To pause the screen image. • When a USB cable is connected, it performs the same function as the right mouse button.
7 English Getting Started Connecting the Projector VGA RS232 DVD player, Set-top box, HDTV receiver Display Video/S-Video Output Speakers # 1 Description Power cord # 6 Description S-Video cable 2 VGA cable 7 RS232 cable 3 VGA to component video/HDTV adapter 8 USB cable 4 Composite video cable 9 3 RCA component cable 5 Audio cable 10 HDMI cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projec
English 8 Turning the Projector On/Off Turning On the Projector 1 Remove the lens cap. 2 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. 3 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. 4 Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.
9 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn solid red to indicate standby mode. 3 It is now safe to unplug the power cord.
English 10 Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1 Press the elevator button. 2 Raise the image to the desired height angle, then release the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel to fine-tune the display angle. To lower the image: 1 Press the elevator button.
11 Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH If the projector is 3 m from the screen, good image quality is possible for image sizes between 72" and 79". • Note: Remind as below figure, the space of 132 cm height is required when the projector is located at 3 m distance.
English 12 X1311KW/X1313PW/X1313PWH If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 93". • Note: Remind as below figure, the space of 142 cm height is required when the projector is located at 3 m distance.
13 Note: Remind as below figure, the space of 262 cm height is required when located at 3 m distance. Max scre Min en s iz scre e en s iz 164" e 137" Height: 219 cm Height: 262 cm From base to top of image 3m Desired distance Minimum Screen Size (Min zoom) Desired From base to Distance Diagonal top of image (m) (inch) W (cm) x H (cm) (cm) Maximum Screen Size (Max zoom) Diagonal (inch) From base to W (cm) x H top of image (cm) (cm) 1 46 93 x 69 74 55 111 x 83 88 1.
English 14 How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH To obtain an image size of 70", set the projector at a distance between 2.6 m and 2.9 m from the screen and adjust the zoom level accordingly. • 70" Desired image size Height: 117 cm From base to top of image 2.6 m 2.
15 70" Desired image size Height: 107 cm From base to top of image 2.3 m 2.5 m Desired distance Desired Image Size Diagonal (inch) W (cm) x H (cm) Distance (m) Max zoom Min zoom Top (cm) From base to top of image < D > 40 86 x 54 1.3 1.4 61 50 108 x 67 1.6 1.8 76 60 129 x 81 1.9 2.1 91 70 151 x 94 2.3 2.5 107 80 172 x 108 2.6 2.8 122 90 194 x 121 2.9 3.2 137 100 215 x 135 3.2 3.6 152 120 258 x 162 3.9 4.3 183 150 323 x 202 4.8 5.
English 16 X1211S To obtain an image size of 70" set the projector at a distance between 1.3 m and 1.5 m from the screen and adjust the zoom level accordingly. • 70" Desired image size Height: 112 cm From base to top of image 1.3 m 1.5 m Desired Image Size Diagonal (inch) Desired distance Distance (m) Top (cm) W (cm) x H (cm) Max zoom Min zoom From base to top of image < D > 50 102 x 76 0.9 1.1 80 60 122 x 91 1.1 1.3 96 70 142 x 107 1.3 1.5 112 80 163 x 122 1.5 1.
17 English User Controls Installation Menu The Installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. 1 Turn on the projector by pressing remote control. (POWER) on the control panel or 2 Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance.
English 18 Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", and "Acer ePower Management". Press " " for more than one second to launch the Onscreen Display main menu to modify its function. Acer eView Management Press " " to launch "Acer eView Management". "Acer eView Management" is for display mode selection. Please refer to the "Onscreen Display (OSD) Menus" section for more details.
19 The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel or remote control. • When the OSD is displayed, use to select an item in the main menu. After selecting the desired main menu item, press for feature setting. • Use to enter a submenu to select the desired item and adjust the settings by using .
English 20 Color There are many factory presets optimized for various types of images. Display Mode Wall Color • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Video: For playing video in a bright environment. • Picture: For graphic picture. • Game: For game content. • Education: For education environment. • User: Memorize user’s settings.
21 Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Degamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. Adjusts a video image from black and white to fully saturated colors. Saturation • Press image.
English 22 Image (X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH) (X1111) Projection (X1111) • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen.
23 Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceilingmounted projection. Use this function to choose your desired aspect ratio. Aspect Ratio Keystone (X1111) • Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels. • Full (X1313PW/X1313PWH): The image will be displayed making full use of the horizontal and vertical pixels.
English 24 Adjusts the sharpness of the image. Sharpness H. Position (Horizontal Position) V. Position (Vertical Position) • Press to decrease the sharpness. • Press to increase the sharpness. • Press to move the image left. • Press to move the image right. • Press to move the image down. • Press to move the image up. Frequency Changes the projector’s refresh rate to match the frequency of your computer’s graphics card.
25 Note: "Sharpness" function is not supported under computer mode. Note: Supported 3D signal timings: Signal source type Supported timing Video/S-Video/Component video NTSC, PAL VGA 640 x 480@100Hz, 640 x 480@120Hz, 800 x 600@100Hz, 800 x 600@120Hz, 1024 x 768@100Hz, 1024 x 768@120Hz DVI HDMI (PC) HDMI (Video) NTSC, PAL While using NVIDIA 3D Vision, please download and install the latest NVIDIA 3D Vision driver from NVIDIA web site for your graphics card to support this projector.
English 26 Setting (X1111H/X1211H/X1213PH/ X1313PWH) (X1111) (X1111A/X1211/X1211S/X1211K/ X1213P/X1311KW/X1313PW) Menu Location HDMI Color Range (X1111H/ X1211H/ X1213PH/ X1313PWH only) HDMI Scan Info (X1111H/ X1211H/ X1213PH/ X1313PWH only) Chooses the OSD menu location on the display screen. Adjusts the color range of the HDMI image data to prevent color display error. • Auto: Automatically adjusts the color range by information from the player.
27 Security This projector provides a useful security function for the administrator to manage the projector. Press Security to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. The factory default of "Administrator Password" is "1234". • Select "On" to enable the security function. You have to enter password depending on the "Security Mode". Please refer to "User Password" section for details.
28 English User Password • Press to set up or change "User Password". • Use the numerical keys on the remote control to set the password and press "MENU" to confirm. • To delete the digits, Press • Enter the password again when you see "Confirm Password" displayed. • The password should be 4~8 digits in length. • If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.
29 English Management ECO Mode Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. High Altitude Choose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full speed continuously to cool down the projector’s temperature.
English 30 Audio (X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH only) Volume Mute • Press to decrease the volume. • Press to increase the volume. • Choose "On" to turn mute on. • Choose "Off" to turn mute off. Timer (X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH) (X1111) Timer Location Sets the location of the timer on the screen.
31 Select this function to adjust the notification volume when the timer function is enabled and time is up. Timer Display Press to choose a timer display mode. Language Language Sets a language for the OSD menus. Use select your preferred language. • Press to confirm the selection. Downloaded From projector-manual.
English 32 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ Win7/Vista)) Solution • Make sure all the cables are correctly connected as described in the "Getting Started" section.
33 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus • Press "RESYNC" on the control panel or remote control. • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
English 34 8 9 10 11 Image is stretched when displaying a "widescreen" DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio.
35 # 1 Condition Message Message Reminder Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Projector Overheated. Lamp will automatically turn off soon.
English 36 LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Red Blue Red Red Standby (Power cord plugged in) V -- -- -- Power on -- V -- -- Lamp retry -- Quick flashing -- -- Turning off (Cooling state) Quick flashing -- -- -- Turning off (Cooling completed) V -- -- -- Error (Thermal failure) -- V -- V Error (Fan lock failure) -- V -- Quick flashing Error (Lamp breakdown) -- V V -- Error (Color wheel failure) -- V Quick flas
37 Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 45 minutes before changing the lamp.
English 38 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. m m m 13 m 20 1 .9 49mm mm 8.4 130 mm Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of cylinder screws.
39 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Large Washer Smaller Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
English 40 5 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 30 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Length (mm) Large Small 3 25 V V 80 mm 137 mm Downloaded From projector-manual.com Acer Manuals 23 mm 116.
41 The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
English 42 Projection distance X1111/X1111H/X1111A/X1211/X1211H/X1211K/ X1213P/X1213PH: 4.9' (1.5 m) - 37' (11.3 m) • X1211S: 3' (0.9 m) - 18' (5.5 m) • X1311KW/X1313PW/X1313PWH: 4.3' (1.3 m) - 32' (9.7 m) • Throw ratio • X1111/X1111H/X1111A/X1211/X1211H/X1211K/ X1213P/X1213PH: 53" @ 2 m (1.86 - 2.04 : 1) • • X1211S: 55" @ 1 m (0.9 - 1.08 : 1) X1311KW/X1313PW/X1313PWH: 63" @ 2 m (1.5 1.
43 • • • • • Power socket x 1 RS232 x 1 VGA input x 1 Composite video x 1 S-Video x 1 Below items are for X1111A/X1211/X1213P/ X1211S/X1211K/X1311KW/X1313PW only. • • • • • 3.5 mm audio jack input x 1 3.5 mm audio jack output x 1 VGA input x 2 VGA output x 1 USB x 1 (Type mini B) Below items are for X1111H/X1211H/X1213PH/ X1313PWH only. Standard package contents Accessory (optional) • HDMI 1.
English 44 Compatibility Modes 1 VGA Analog - PC Signal Mode VGA SVGA XGA Resolution V.Frequency [Hz] H.Frequency [KHz] 60 31.47 72 37.86 75 37.50 85 43.27 120 61.91 56 35.20 60 37.88 72 48.08 75 46.88 640 x 480 800 x 600 1024 x 768 1152 x 864 SXGA 1280 x 1024 85 53.67 120 77.42 60 48.36 70 56.48 75 60.02 85 68.67 120 98.96 70 63.80 75 67.50 85 77.10 60 63.98 72 76.97 75 79.98 85 91.15 1280 x 960 60 60.00 1280 x 960 75 75.
45 WXGA 2 1024 x 768 75 60.30 1280 x 768 60 47.78 1280 x 768 75 60.29 1280 x 768 85 68.63 1280 x 720 60 44.80 1280 x 800 60 49.60 1440 x 900 60 55.90 1680 x 1050 60 65.30 1366 x 768 60 47.71 1920 x 1080-RB 60 66.60 1920 x 1080-EIA 60 66.60 1024 x 600 60 37.30 HDMI - PC Signal (For X1111H/X1211H/X1213PH/X1313PWH) Mode Resolution 640 x 480 VGA 720 x 400 SVGA XGA 800 x 600 1024 x 768 Downloaded From projector-manual.com Acer Manuals V.Frequency [Hz] H.
46 63.80 75 67.50 85 77.10 60 63.98 72 76.97 75 79.98 85 91.15 1280 x 960 60 60.00 1280 x 960 75 75.00 SXGA+ 1400 x 1050 60 65.32 UXGA 1600 x 1200 60 75.00 640 x 480 60 31.50 640 x 480 66.6 (67) 35.00 800 x 600 60 37.88 English 70 1152 x 864 SXGA 1280 x 1024 QuadVGA PowerBook G4 i Mac DV(G3) WXGA 3 832 x 624 75 49.72 1024 x 768 60 48.36 1152 x 870 75 68.68 1280 x 960 75 75.20 1024 x 768 75 60.30 1280 x 768 60 47.78 1280 x 768 75 60.
47 4 50 60 (30) 50 (25) 60 50 24 23.98 37.50 33.75 33.75 67.50 56.26 27.00 26.97 Resolution 720 x 480 720 x 480 720 x 576 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 V.Frequency [Hz] 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 24.00 23.98 H.Frequency [KHz] 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 67.5 56.26 27.00 26.
English 48 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
English 50 List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. Downloaded From projector-manual.
Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.
English 52 Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: • Article 3.1(a) Health and Safety -. EN60950-1 -. EN62311 • Article 3.1(b) EMC -. EN301 489-1 -. EN301 489-17 • Article 3.2 Spectrum Usages -. EN300 328 -.
www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
