Quick Start Guide

ManualsBrandsAcer ManualsComputer MonitorsB248Y bemiqprcuzx B8 Series - LED monitor - Full HD (1080p) - 23.8" - HDR

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the DP (optional)

and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the

signal cable connector.

3. Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

4. USB Type C Cable (Optional, USB Type-C input models only)

Connect one end of the USB type C cable (optional) to your computer and connect the other end to your electric

devices.

5. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with

the audio cable.

6. Insert the monitor power cable into the power port at the back of the monitor.

7. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Visit Acer Support website to download IR webcam driver

https://www.acer.com/worldwide/support/

Note:

1. Audio output is only for audio output model. Please check user manual for more instruction.

2. RJ45:support 10M/100M/1000Mbps

USB Type C

USB

DP OUT

External controls

1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby, power

saving and OSD locked.

Summary of content (2 pages)

PAGE 1
Acer LCD Monitor Quick Start Guide (QSG) Important safety instructions 1. 2. 3. 4. 5. 6. To clean the LCD monitor screen: • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
PAGE 2
Function key English / 3 Function key 4 Function key / /X 5 Function key / a. b. a. b. Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults. Press to view Main page.Press again to enter hotkey2 function. When the Function Menu is active, press this button to select select scenario mode or game mode . a. b.