Acer Projector PL6610T/PL6610/PL6510/PL6310W/PL6210/ SL6610T/SL6610/SL6510/SL6310W/SL6210/ FL261T/FL261/FL251/FL221/FL211/FL261ST/ FL261S/FL251S/FL221S/FL211S/ LU-P500UT/ LU-P500U/LU-P500F/LU-P500W/ LU-P500X/ LU-S500UT/LU-S500U/LU-S500F/ LU-S500W/ LU-S500X/PF-L500UT/PF-L500U/ PF-L500F/ PF-L500W/PF-L500X/PS-L500UT/ PS-L500U/ PS-L500F/PS-L500W/PS-L500X/ LR660T/ LR660/LR560/LR360/LR260/LR660ST/ LR660S/ LR560S/LR360S/LR260S/ML-560B/ ML-560/ ML-460/ML-260/ML-160/ML-560SB/ ML-560S/ ML-460S/ML-260S/ML-160S/ DWU184
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.
Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
Portrait projection Do not use the projector with it leaning to the left and right. This may result in a malfunction, however, portrait installation is possible. Note: Please do not install the projector in a vertical orientation on the top of the floor or table on its own. The intake vent may be obstructed, resulting in the projector getting warm and the possibility of fire and malfunction occurring.
First things first Usage Notes Do: yy Turn off the product before cleaning. yy Use a soft cloth moistened with mild detergent to clean the displayhousing. yy Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: yy Block the slots and openings on the unit provided for ventilation. yy Use abrasive cleaners, waxes or solvents to clean the unit. yy Use under the following conditions: yy In extremely hot, cold or humid environments.
TABLE OF CONTENTS INTRODUCTION................................................................................. 9 Package Overview..................................................................................................................... 9 Standard accessories................................................................................................................. 9 Optional accessories..........................................................................................................
ADDITIONAL INFORMATION........................................................... 49 Compatible resolutions.............................................................................................................. 49 Image size and projection distance........................................................................................... 52 Projector dimensions and ceiling mount installation.................................................................. 55 Troubleshooting..........................
INTRODUCTION Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information.
INTRODUCTION Product Overview 2 1 4 5 6 7 3 8 11 10 9 8 8 12 Note: Do not block projector intake and exhaust vents. When operating the projector in an enclosed space, allow at least 50 cm clearance around the intake and exhaust vents. No. 10 English Item No. Item 1. IR Receivers 7. Ventilation (outlet) 2. Keypad 8. Tilt-Adjustment Feet 3. Lens Shift Dial 9. Kensington™ Lock Port 4. Ventilation (inlet) 10. Input / Output 5. Zoom Lever 11. Power Socket 6.
INTRODUCTION Connections 1 13 2 16 No. 3 4 12 Item 14 11 15 10 5 6 9 8 7 14 IO 15 IO 1. HDMI 2 (v1.4) Connector √ √ 2. HDMI 1(v2.0)(4K) / MHL Connector √ √ 3. USB Power Out (5V 1.5A) Connector √ √ 4. VGA In / VGA In 1 Connector √ √ 5. Composite Connector √ √ 6. Audio In 1 / Microphone Connector √ √ 7. Kensington √ √ 8. Audio Out Connector √ √ 9. Audio In 2 Connector √ √ 10. VGA Out Connector √ √ 11. RS232 Connector √ √ 12.
INTRODUCTION Keypad 1 2 3 8 4 9 5 10 6 11 8 7 No. 12 English Item No. Item 1. Power LED 7. Menu 2. Lamp LED 8. Keystone Correction 3. Temp LED 9. Information 4. Power 10. Enter 5. Source 11. Re-Sync 6.
INTRODUCTION Remote control 26 1 7 2 8 3 9 4 5 10 6 11 19 12 20 13 21 14 22 15 23 16 24 17 25 Model No:J-25050 18 MC.JMV11.009 No. Item No. Item 1. Infrared transmitter 14. PgUp (not supported) 2. POWER 15. COMPONENT (not supported) 3. Laser button 16. PgDn (not supported) 4. RATIO 17. MEDIA (not supported) 5. Select/Enter Play/Pause 18. KeyPad 0~9 6. Four directional select keys 19. MENU 7. 3D 20. HDMI™/MHL 8. SOURCE 21. HIDE 9. MODE 22.
SETUP AND INSTALLATION Installing the projector Your projector is designed to be installed in one of four possible positions. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.
SETUP AND INSTALLATION Projector installation notice Place the projector in a horizontal position. The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount and may lead to other unpredictable damages. 15° -15° Minimum 100mm (3.94 inches) Minimum 500mm (19.69 inches) Minimum 500mm (19.69 inches) Minimum 100mm (3.94 inches) Minimum 100mm (3.94 inches) Minimum 100mm (3.
SETUP AND INSTALLATION Connecting sources to the projector 2 2 L R 3 3 10 10 USB flash drive 16 9 10 Smart devices 3 5 HDTV adapter 6 4 RCA 5 Display 7 Video Output 8 2 Speakers 11 Screen 12 12 13 14 3D IR Emitter 15 Audio Output 1 16 English
SETUP AND INSTALLATION # Description 1 Power cord 2 Audio cable 3 HDMI (MHL) cable 4 VGA to component/HDTV adapter 5 VGA cable 6 3 RCA component cable 7 Composite video cable 8 RS232 cable 9 WirelessHD dongle 10 Wireless dongle 11 Wireless remote control 12 LAN cable 13 12V DC cable 14 3D SYNC cable 15 SPDIF cable 16 USB flash drive Note: - To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projecto
SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
SETUP AND INSTALLATION Remote setup Installing / replacing the batteries Two AAA size batteries are supplied for the remote control. 1. 2. 3. Remove the battery cover on the back of the remote control. Insert AAA batteries in the battery compartment as illustrated. Replace back cover on remote control. Note: Replace only with the same or equivalent type batteries. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
SETUP AND INSTALLATION Effective range Infra-Red (IR) remote control sensor is located on the top and front sides of the projector. Ensure to hold the remote control at an angle within 40 degrees perpendicular to the projector’s IR remote control sensor to function correctly. The distance between the remote control and the sensor should not be longer than 5 meters (16.4 feet).
USING THE PROJECTOR Powering on / off the projector or Lens cap Powering on 1. Remove the lens cap. 2. Securely connect the power lead and signal/source cable. When connected, the Power LED will turn red. 3. Turn on the projector by pressing the button on the projector keypad or remote control. 4. A start up screen will display in approximately 10 seconds and the Power LED will turn blue.
USING THE PROJECTOR Selecting an input source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, press the button on the projector keypad or the Source button on the remote control to select the desired input.
USING THE PROJECTOR Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. button on the projector keypad or the Menu button on the remote 1. To open the OSD menu, press the control. 2. When OSD is displayed, use pq keys to select any item in the main menu.
USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Presentation Bright HDR SIM. Cinema Game Display Mode sRGB DICOM SIM. User 3D Off [Default] Blackboard Light Yellow Wall Color Light Green Light Blue Pink Gray Display Image Settings Brightness -50 ~ 50 Contrast -50 ~ 50 Sharpness 1 ~ 15 Color -50 ~ 50 Tint -50 ~ 50 Film Video Graphics Gamma Standard(2.2) 1.8 2.0 2.4 2.
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Red [Default] Green Blue Color Cyan Yellow Magenta Color Matching White(*) Hue / R(*) -50 ~ 50 [Default: 0] Saturation / G(*) -50 ~ 50 [Default: 0] Gain / B(*) -50 ~ 50 [Default: 0] Reset Cancel [Default] Yes Exit Color Settings RGB Gain/Bias Red Gain -50 ~ 50 Green Gain -50 ~ 50 Blue Gain -50 ~ 50 Red Bias -50 ~ 50 Green Bias -50 ~ 50 Blue Bias -50 ~ 50 Reset Display Image Settings Cancel [Defaul
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu 3 Sub Menu 4 Values Off [Default] DLP-Link 3D [Default] 3D 2D L R 3D Auto [Default] 3D Format SBS Top and Bottom Frame Sequential 3D Sync Invert On Off [Default] 4:3 16:9 Display 16:10 Aspect Ratio LBX Native Auto Edge Mask 0 ~ 10 [Default: 0] Zoom -5 ~ 25 Image Shift H -100 ~ 100 [Default: 0] V -100 ~ 100 [Default: 0] Four Corners Geometric Correction H Keystone -30 ~ 30 [Default: 0] V Keystone -30 ~ 30 [Defa
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Values Audio 1 VIDEO Audio 2 Audio Input Audio Sub Menu 4 Audio 1 Audio 2 HDBaseT Default Audio Input Audio/Mic Input Function Mic Front [Default] Rear Projection Ceiling-top Rear-top 16:9 Screen Type 16:10 [Default] Off [Default] Direct Power On On Off [Default] Signal Power On Power Settings Setup On Auto Power Off (min.
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values English [Default] Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk/Dansk Suomi ελληνικά 繁體中文 Language 简体中文 日本語 한국어 Русский Magyar Čeština Setup Options ไทย Türkçe Tiếng Việt Bahasa Indonesia Română Slovenčina CC1 Closed Captioning CC2 Off [Default] Top left Top right Menu Location Center [Default] Bottom left Menu Settings Bottom right Off Menu Timer 5sec 10sec [Default] Auto Source
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values HDMI1/MHL HDMI2 VGA IN 1 [Default] Input Source VGA IN 2 Video S-Video HDBaseT High Altitude Options Setup Off [Default] On Default [Default] Logo Neutral User Black [Default] Blue Background Color Red Green Gray Logo Reset Reset to Default Network Yes Network Status (read only) MAC Address (read only) DHCP LAN Cancel [Default] Off [Default] On IP Address 192.168.0.100 [Default] Subnet Mask 255.255.
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Serial Number Source Resolution 00x00 Refresh Rate 0.00Hz Display Mode Power Mode (Standby) Info Light Source Hours 0 hr Network Status IP Address Brightness Mode System FW Version LAN MCU Note: Functions vary depending on model definition.
USING THE PROJECTOR Display menu Display image settings menu Display Mode There are many factory presets optimized for various types of images. Presentation: This mode is suitable for showing in front of public in connection to the PC. Bright: Maximum brightness from PC input. HDR SIM.: Decodes and displays High Dynamic Range (HDR) content for the deepest blacks, brightest whites, and vivid cinematic color using REC.2020 color gamut.
USING THE PROJECTOR These options are only available if the 3D mode function is disabled, the Wall Color setting is not set to Blackboard, and the Display Mode setting is not set to DICOM SIM. or HDR SIM.. In 3D mode, user can only select 3D for Gamma setting. If the Wall Color setting is set to Blackboard, user can only select Blackboard for Gamma setting. If the Display Mode setting is set to DICOM SIM., user can only select DICOM SIM. for Gamma setting.
USING THE PROJECTOR Brightness Mode Adjust the brightness mode settings. DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast performance. Power: Choose the power percentage for brightness mode. Reset Return the factory default settings for color settings. Display 3D menu Note: This projector is a 3D ready projector with DLP-Link 3D solution. Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video.
USING THE PROJECTOR Display aspect ratio menu Aspect Ratio Select the aspect ratio of the displayed image between the following options: 4:3: This format is for 4:3 input sources. 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10 (for WUXGA model only): This format is for 16:10 input sources, like widescreen laptops. LBX: This format is for non-16x9, letterbox source and if you use external 16x9 lens to display 2.
USING THE PROJECTOR 1080p auto mapping rule: Input resolution Auto 4:3 Wide Laptop SDTV HDTV Auto/Scale H-resolution V-resolution 1920 1080 640 480 1440 1080 800 600 1440 1080 1024 768 1440 1080 1280 1024 1440 1080 1400 1050 1440 1080 1600 1200 1440 1080 1280 720 1920 1080 1280 768 1800 1080 1280 800 1728 1080 720 576 1350 1080 720 480 1620 1080 1280 720 1920 1080 1920 1080 1920 1080 WUXGA scaling table for 1920 x 1200 DMD (screen type 16:10): Not
USING THE PROJECTOR WUXGA auto mapping rule (screen type 16:10): Auto 4:3 Wide Laptop SDTV HDTV Input resolution Auto/Scale H-resolution V-resolution 1920 1200 640 480 1600 1200 800 600 1600 1200 1024 768 1600 1200 1280 1024 1600 1200 1400 1050 1600 1200 1600 1200 1600 1200 1280 720 1920 1080 1280 768 1920 1152 1280 800 1920 1200 720 576 1350 1080 720 480 1620 1080 1280 720 1920 1080 1920 1080 1920 1080 WUXGA scaling table (screen type 16:9): 16 :
USING THE PROJECTOR HDTV 1280 720 1920 1080 1920 1080 1920 1080 Display edge mask menu Edge Mask Use this function to remove the video encoding noise on the edge of video source. Display zoom menu Zoom Use to reduce or magnify an image on the projection screen. Display image shift menu Image Shift Adjust the projected image position horizontally (H) or vertically (V).
USING THE PROJECTOR Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound. On: Choose “On” to turn mute on. Off: Choose “Off” to turn mute off. Note: “Mute” function affects both internal and external speaker volume. Audio volume menu Volume Adjust the volume level. Audio audio input menu Audio Input Select the audio input port for the video sources as follows: HDMI1/MHL: Audio 1, Audio 2, or Default. HDMI2: Audio 1, Audio 2, or Default.
USING THE PROJECTOR Setup menu Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. Setup screen type menu Screen Type (for WXGA/WUXGA model only) Choose the screen type from 16:9 and 16:10. Setup power settings menu Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “Power” key on the projector keypad or on the remote control.
USING THE PROJECTOR Setup HDMI Link settings menu Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector’s OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system.
USING THE PROJECTOR Setup options menu Language Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian/Danish, Finnish, Greek, traditional Chinese, simplified Chinese, Japanese, Korean, Russian, Hungarian, Czechoslovak, Arabic, Thai, Turkish, Farsi, Vietnamese, Indonesian, Romanian, and Slovakian. Closed Captioning Closed Captioning is a text version of the program sound or other information displayed on the screen.
USING THE PROJECTOR 4. Install and Click Splash Downloader Find the Acer_Splash_downloader_v0.4.zip in the CD user manual. Then click Splash Downloader. If the message says “Projector found”, the projector has been connected successfully. Note: If “Error: No Projector found.”, the projector is not connected. Please retry step 2 and step 3. 5. Select logo file Click the “Browse” button and select logo file.
USING THE PROJECTOR Network menu Network LAN menu Network Status Display the network connection status (read-only). MAC Address Display the MAC address (read-only). DHCP Use this option to enable or disable the DHCP function. Off: To assign IP, subnet mask, gateway, and DNS configuration manually. On: Projector will obtain an IP address automatically from your network. Note: Exiting OSD will automatically apply the entered values. IP Address Display the IP address.
USING THE PROJECTOR Making a direct connection from your computer to the projector* Reset 1. 2. 3. Turn “Off” the DHCP option on the projector. Configure the IP address, Subnet Mask, Gateway, and DNS on projector (“Network > LAN”). Open Network and Sharing Center page on your PC, and assign the identical network parameters to your PC as set on projector. Click “OK” to save the parameters. 4. Open the web browser on your PC and type in to the URL field the IP address, assigned in step 3.
USING THE PROJECTOR Setup network control settings menu LAN_RJ45 function For simplicity and ease of operation, the projector provides diverse networking and remote management features. The LAN / RJ45 function of the projector through a network, such as remotely manage: Power On / Off, brightness, and contrast settings. Also, you can view the projector status information, such as: Video- Source, Sound-Mute, etc.
USING THE PROJECTOR LAN RJ45 46 English 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). 2. On the PC (Laptop), select Start > Control Panel > Network Connections. 3. Right-click on the Local Area Connection, and select Property. 4. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP).
USING THE PROJECTOR 5. Click “Properties”. 6. Type in the IP address and Subnet mask, then press “OK”. 7. Press the “Menu” button on the projector. 8. Open on projector Network > LAN. 9. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255.0 ±± Gateway: 192.168.0.254 ±± DNS: 192.168.0.51 10. 11. Press “Enter” to confirm settings. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.
USING THE PROJECTOR Info menu Info menu View the projector information as listed below: 48 English Serial Number Source Resolution Refresh Rate Display Mode Power Mode (Standby) Light Source Hours Network Status IP Address Brightness Mode FW Version
ADDITIONAL INFORMATION Compatible resolutions Digital compatibility Digital (HDMI 1.
ADDITIONAL INFORMATION Digital (HDMI 2.0) B0 / Established Timing B0 / Standard Timing B0 / Detail Timing B1 / Video Mode B1 / Detail Timing 3840 x 2160 @ 30Hz 4096 x 2160 @ 24Hz 3840 x 2160 @ 50Hz 3840 x 2160 @ 60Hz 4096 x 2160 @ 50Hz 4096 x 2160 @ 60Hz 4096 x 2160 @ 25Hz 4096 x 2160 @ 30Hz Note: Functions vary depending on model definition.
ADDITIONAL INFORMATION True 3D video compatibility Input timing HDMI 1.
ADDITIONAL INFORMATION Image size and projection distance WXGA Series To obtain an image size of 60” set the projector at a distance 1.9 m and 3.0 m from the screen. A 60” Desired image size D Height: 93 cm from base to top of image 1.9 m 3.0 m C Desired image size Diagonal (inch) W (cm) x H (cm) 20 43 x 27 Distance (m) Max zoom Top (cm) Min zoom From base to top of image 1.0 31 30 65 x 40 0.9 1.5 46 50 108 x 67 1.6 2.5 77 60 129 x 81 1.9 3.
ADDITIONAL INFORMATION WUXGA series To obtain an image size of 60” set the projector at a distance 1.8 m and 2.9 m from the screen. A 60” Desired image size D Height: 86 cm from base to top of image 1.8 m 2.9 m C Desired image size Diagonal (inch) W (cm) x H (cm) 21 45 x 28 B Desired Distance Distance (m) Max zoom Top (cm) Min zoom From base to top of image 1.0 30 40 86 x 54 1.2 1.9 58 60 129 x 81 1.8 2.9 86 70 151 x 94 2.1 3.4 101 80 172 x 108 2.4 3.
ADDITIONAL INFORMATION 1080p series To obtain an image size of 60” set the projector at a distance 1.9 m and 3.0 m from the screen. A 60” Desired image size D Height: 88 cm from base to top of image 1.9 m 3.0 m C Desired image size Diagonal (inch) W (cm) x H (cm) 20 44 x 25 Distance (m) Max zoom Top (cm) Min zoom From base to top of image 1.0 29 40 89 x 50 1.2 2.0 59 60 133 x 75 1.9 3.0 88 70 155 x 87 2.2 3.5 103 80 177 x 100 2.5 4.0 118 90 199 x 112 2.
ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. 2. To prevent damage to your projector, please use the Acer ceiling mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M6*10 Minimum screw length: 10mm Lens Unit: mm Note: Please note that damage resulting from incorrect installation will void the warranty.
ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. Ensure the pins of connectors are not crooked or broken. Ensure that the "Mute" feature is not turned on.
ADDITIONAL INFORMATION Other problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work Check the operating angle of the remote control is pointed within ±20° to the IR receiver on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 5 m (16.
ADDITIONAL INFORMATION LED lightning messages Power LED Message (Red) Standby state (Input power cord) (Blue) Temp LED Lamp LED (Red) (Red) Steady light Flashing (0.5 sec off / 0.5 sec on) Power on (Warming) Power on and Lamp lighting Steady light Flashing (0.5 sec off / 0.5 sec on). Back to red steady light when cooling fan turns off. Power off (Cooling) Flashing (0.25 sec off / 0.
ADDITIONAL INFORMATION Specifications Optical Description Maximum resolution 1920x1200@60Hz(RB) Native resolution WXGA 1080p WUXGA Lens Manual zoom and manual focus Image size (diagonal) WXGA: 20” ~ 300” (51cm ~ 762cm) 1080p: 20” ~ 300” (51cm ~ 762cm) WUXGA: 21” ~ 302” (53cm ~ 767cm) Projection distance WXGA: 1.0m ~ 9.5m (20” ~300’) 1080p: 1.0m ~ 9.3m (20” ~300’) WUXGA: 1.0m ~ 9.1m (21” ~302’) Electrical Description Inputs HDMI 1.4a HDMI 2.
ADDITIONAL INFORMATION Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ADDITIONAL INFORMATION General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS247) a Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
Acer Incorporated of Conformity 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.
Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.