Acer Wireless Keyboard and Mouse USER’S GUIDE Ver.:1.00 AKR200 / AMR200 CAUTION: To use this product properly, please read the user’s guide before installing.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Functional Introduction Mouse Buttons 1. 2. 3. 4. 5. 6. 7. 8. 9. Left button Right button Scrolling Wheel LED Indicator Forward Backward Battery Cover ON/OFF Switch Nano Receiver Forward Press this button to view the next page in your Internet browser. Backward Press this button to view the previous page in your Internet browser.
Keyboard Buttons 1 2 3 4 5 6 7 8 13 9 10 11 12 AAA Battery X 2 14 Key Function (* compound key, Press with Fn key) 1 Media Select Turn on the Media player program. 2 Mute Mute (turns off) the computer’s sound. 3 Volume down (Voice-) Decrease the computer’s sound volume.
4 Volume up (Voice+) Increase the computer’s sound volume. 5 Previous Switch to the previous media track. 6 Next Switch to the next media track. 7 Play/Pause Switch between playing and pausing media. 8 Stop (Media) Stop playing the media in the media player. 9 Homepage (www/e) Start the default Web browser and loads the home Web page. 10 Outlook (E-mail) > Default Start the default e-mail program. 11 My Computer My Computer.
Installing the batteries Step 1: Take the battery cover off. Step 2: Insert the battery as shown inside the battery compartment. AMR200 2 1 Pull 1st 2nd AA Battery X 2 AKR200 AAA Battery X 2 Step 3: Replace the cover.
Step 4: Turn on power switch. AMR200 **Warning: * Please insert the battery with the correct position according to the instruction labeled on the mouse & Keyboard. Setup the Connection between the Receiver and the Mouse & Keyboard 1. Insert the battery into the mouse & Keyboard, then follow the steps below. 2. In the meantime, to open the cover under the mouse, take the nano receiver out.
3. Plug the Nano receiver into the USB port on your computer. 4. If the device does not work, please turn it into pairing mode. 5. Pairing: Re-plug the receiver into the USB port on your computer, then press connect button of the mouse and keyboard “ESC + K”. If the mouse or keyboard does not work after 10 seconds, pair them again. (The receiver has auto pairing function). 6.
*Keyboard Indicator LED Indicator LED is on for 10 sec. Power ON LED Blinking During Pairing (LED OFF when paired or failed after 10 sec.) LED Blinks for 10 sec.