Quick Start Guide

ManualsBrandsACER ManualsComputers & AccessoriesWireless Keyboard

Quick Start Guide

Mouse Specifications

Model:

AMR800 Weight: 50±10g

Buttons: 3 Connector Type: RF 2.4GHz

Sensor Type: Optical DPI: 1600

Dimensions (L x W x H): 95.2 x 58.5 x 34.6 mm

Device Features

Keyboard Specifications

Model: AKR920

Weight: 350±20g

Dimensions (L x W x H): 305 x 145 x 25.5 mm

Connector Type: RF 2.4GHz

Device Features

1. LED Indicator

Power On: LED is on for 10 seconds

Low Battery:

 Blinks for 10 seconds and turns off after power on

 Flashes continuously during work, and turns off after 10 seconds.

Summary of content (4 pages)

PAGE 1
Quick Start Guide Mouse Specifications Model: AMR800 Weight: 50±10g Buttons: 3 Connector Type: RF 2.4GHz Sensor Type: Optical DPI: 1600 Dimensions (L x W x H): 95.2 x 58.5 x 34.6 mm Device Features Keyboard Specifications Model: AKR920 Dimensions (L x W x H): 305 x 145 x 25.5 mm Weight: 350±20g Connector Type: RF 2.4GHz Device Features 1.
PAGE 2
Setup the Connection between the Receiver and the Mouse, Keyboard. How to Use 1. Open the battery compartment cover at the bottom of the mouse & keyboard. 2. Insert the batteries into the mouse and keyboard, then follow the steps below. 3. Replace the battery compartment cover. 4. Plug the USB receiver into one of your computer’s USB ports. Now you are ready to use the devices. Contents of the Box RF 2.4GHz Mouse x1 RF 2.
PAGE 3
Quick Start Guide x1 Warranty Booklet x1 Caution  Do not disassemble the device or operate the device under abnormal conditions.  Do not submerge the device in water.  If the device could not be functional, or there was thermal abnormal situation, please re-plug into USB ports.  If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance.
PAGE 4
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.