Acer Projector H5360 Series User's Guide
Copyright © 2009. Acer Incorporated. All Rights Reserved. Acer Projector H5360 Series User's Guide Original Issue: 08/2009 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not turn off the main power abruptly or unplug the projector during operation.
vii Operating environment for using wireless function (Optional) Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger.
viii Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.
ix Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.
x First thing first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
iii First thing first x Usage Notes x Precautions x Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Remote Control and Control Panel Layout 4 Getting Started 6 Connecting the Projector 6 Turning the Projector On/Off 7 Turning on the Projector 7 Turning off the Projector 8 Adjusting the Projected Image 9 Adjusting the Height of Projected Image 9 How to optimize image size and distance 10 How to get a preferred image size by adju
Troubleshooting 25 LED & Alarm Definition Listing 29 Replacing the Lamp 30 Ceiling Mount Installation 31 Specifications 34 Compatibility modes 36 Regulations and safety notices 40
1 Product Features This product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • Native 1280 x 720 720p resolution 4:3 / 16:9 / L.
English 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.
3 English Projector Overview Projector Outlook Front / upper side 1 7 8 3 2 9 3 1 4 10 5 6 # 1 2 3 4 5 Description # Ventilation (inlet) Ventilation (outlet) Remote control receivers Focus ring Zoom lens 6 7 8 9 10 Description Lens cap Power button Remote control Zoom lever Horn Rear side 3 4 5 6 7 8 9 RS232 2 1 # Description # 6 Description 1 Power socket 2 KensingtonTM lock port 7 S-Video input connector 3 4 RS232 connector 8 Composite video input connector 5 PC an
English 4 Remote Control and Control Panel Layout 2 1 8 3 9 8 4 # Icon 5 6 10 11 7 12 2 13 Function Description 1 Remote control receiver Receives signals from remote control. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MENU • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. 4 KeyPad 0~9 Press "0~9" to input a password in the "Security".
5 Icon Function Empowering key Description Unique Acer functions: eView, eTimer, ePower Management. Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector.
Getting Started Connecting the Projector VGA DVD player D-Sub 2 3 R B G RS232 DVD player, Set-top Box, HDTV receiver HDMI D-Sub 4 6 5 HDMI R B G RS232 Y 1 9 7 S-Video Output Y Video Output # Description 8 R W English 6 # 6 Description 1 Power cord Audio cable jack/jack 2 RS232 cable 7 Audio cable Jack/RCA 3 VGA cable 8 Composite video cable 4 HDMI cable 9 S-Video cable 5 3 RCA component cable Note: To ensure the projector works well with your computer, please
7 Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. (Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
English 8 Turning off the Projector 1 To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds. "Please press power button again to complete the shutdown process." 2 Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds. This is to ensure that the system cools correctly.
9 Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle.
English 10 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87". Note: Remind as below figure, the space of 122 cm height is required when located at 3m distance.
11 (Min zoom) W (cm) x H (cm) Top Screen size (Max zoom) From base to Diagonal top of image (inch) (cm) W (cm) x H (cm) From base to top of image (cm) 41 1 27 59 x 33 37 29 65 x 36 1.5 40 88 x 50 56 44 97 x 54 61 2 53 118 x 66 74 58 129 x 73 82 2.5 66 147 x 83 93 73 161 x 91 102 3 80 176 x 99 112 87 194 x 109 122 3.5 93 206 x 116 130 102 226 x 127 143 4 106 235 x 132 149 117 258 x 145 163 4.
English 12 How to get a preferred image size by adjusting distance and zoom A 50" Desir e imag d es ize D Height Form base to top of image 1.7 m 1.9 m C B Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly.
13 Distance (m) Top (cm) Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom 30 66 x 37 1.0 1.1 From base to top of image 42 40 89 x 50 1.4 1.5 56 50 111 x 62 1.7 1.9 70 60 133 x 75 2.1 2.3 84 70 155 x 87 2.4 2.6 98 80 177 x 100 2.7 3.0 112 90 199 x 112 3.1 3.4 126 100 221 x 125 3.4 3.8 140 120 266 x 149 4.1 4.5 168 150 332 x 187 5.1 5.6 210 180 398 x 224 6.2 6.8 252 200 443 x 249 6.9 7.5 280 250 553 x 311 8.6 9.
English 14 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing "Power" button on the control pad.
15 Empowering Key Acer Empowering Key provide three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer ePower Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function. Acer eView Management Press " " to launch "Acer eView Management" submenu. "Acer eView Management" is for display mode selection. Please refer to Onscreen Display Menus section for more detail.
English 16 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control. • When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press submenu for feature setting. • Use the using the to enter keys to select the desired item and adjust the settings by keys.
17 Display Mode English Color There are many factory presets optimized for various types of images. • • • • • • • Bright: For brightness optimization. Standard: For common environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Sports: For sport picture. User: Memorize user’s settings. Wall color Use this function to choose a proper color according to the wall.
English 18 Saturation Adjusts a video image from black and white to fully saturated color. Tint • Press to decrease the amount of color in the image. • Press to increase the amount of color in the image. Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode.
19 Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. Auto Keystone Automatically adjusts vertical image.
English 20 Note: "Sharpness" functions is not supported under DVI and Computer mode. Note: While using NVIDIA 3D Vison, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files.
21 English Setting Menu Location Choose the menu location on the display screen. Source Lock When source lock is turned "off", the projector will search for other signals if the current input signal is lost. When source lock is turned "on", it will "lock" the current source channel unless you press "Source" button on the remote control for the next channel. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area).
22 English User password • • Press • Press • Enter the password when you see "Confirm Password" displayed. • • The password should be between 4 and 8 characters long. • If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on. to setup or change the "User Password". Press number keys to set your password on the remote control and press "MENU" to confirm. to delete character.
23 English Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitutde Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Shutdown The projector will automatically shutdown when there is no signal input after the allocated time.
English 24 Timer Timer Location • Choose the location of the timer on the screen. Timer Start • Press to start or stop the timer. Timer Period • Press or Timer Volume • Select this function to adjust the nitification volume when the timer function is enabled and time is up. Timer Display • Press or to adjust the timer period. to which timer mode to display on the screen. Language Language Choose the multilingual OSD menu. Use the to select your preferred menu language.
25 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image(For PC (Windows 95/98/ 2000/XP)) Solution • Connected as described in the "Getting Started" section. • Ensure none of the connector pins are bent or broken.
English 26 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a "widescreen" DVD title • • Press "RESYNC" on the remote control. • If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
27 10 11 Image is too small or too large Image has slanted sides Image is reversed • • Adjust the zoom lever on the front of the projector. • Press "MENU" on the remote control. Go to "Image --> Aspect Ratio" and try different settings or press"Aspect Ratio" on the remote control to adjust directly. • If possible, reposition the projector so that it is centered on the screen. • Press the "Keystone / " button on the remote control until the sides are vertical.
English 28 OSD Messages # 1 Condition Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.
29 English LED & Alarm Definition Listing LED Messages Power LED Message Red Blue Flash ON to OFF 100ms -- Standby V -- Power button ON -- V Lamp retry -- Quick Flashing Quick Flashing -- V -- Input Power Plug Power off (Cooling state) Power button OFF: Cooling completed; Standby Mode Error (Thermal Failure) Quick Flashing RED and Steady BLUE by returns Error (Fan lock) Quick Flashing RED and Steady BLUE by returns Error (Lamp breakdown) Quick Flashing BLUE and Steady RED by returns
English 30 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp.
31 If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 2 m 13 m m 0 m 1 mm 130 mm 8.4 .9 49mm Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws.
English 32 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Screw Type B Large Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
33 Adjust the angle and positioning as necessary. English 5 Tightening Screw Allen Key 3 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Washer Type Length (mm) Large Small 3 25 V V SCREW SPEC. M3 x 25 mm 82.30 mm H5360 Screw Type B Diameter (mm) 95.00 mm 15.
English 34 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system DLP® Resolution H5360: Native: 720P (1280 x 720) , Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080) Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA + Video compatibility NTSC (3.58/4.
35 • • • • • • • • • AC power cord x1 VGA cable x1 Composite video cable x1 Remote control x1 Battery x1 (for remote control) User's guide (CD-ROM) x1 Quick start guide x1 Security card x1 Carrying case x1 * Design and specifications are subject to change without notice.
English 36 Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.47 640x480 72 37.86 640x480 75 37.50 640x480 85 43.27 640x480 119.51 61.60 800x600 56 35.20 800x600 60 37.88 800x600 72 48.08 800x600 75 46.88 800x600 85 53.67 800x600 119.85 77.20 1024x768 60 48.36 1024x768 70 56.48 1024x768 75 60.02 1024x768 85 68.67 1024x768 119.804 98.80 SVGA XGA SXGA 1152x864 70 63.
37 VGA Analog - Extended Wide timing Modes WXGA WXGA+ WSXGA 3 Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1366x768 1440x900 1680x1050 1920x1080-RB 1920x1080-EIA 1024x600 V.Frequency [Hz] 60 75 85 60 119.858 60 60 60 60 60 60 60 H.Frequency [KHz] 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 65.30 66.60 66.60 37.
English 38 SXGA 1024x768 70 56.48 1024x768 75 60.02 1024x768 119.804 98.80 1152x864 70 67.50 1152x864 85 77.10 1280x1024 60 64.00 1280x1024 72 77.90 1280x1024 75 79.98 1280x1024 85 91.15 QuadVGA 1280x960 75 75.00 PowerBook G4 640x480 60 31.50 PowerBook G4 640x480 66.6(67) 35.00 PowerBook G4 800x600 60 37.88 PowerBook G4 1024x768 60 48.36 PowerBook G4 1152x870 75 68.68 PowerBook G4 1280x960 75 75.20 i Mac DV(G3) 1024x768 75 60.
39 1920x1080 50(25) 33.75 1920x1080 60 67.50 1080p 1920x1080 50 56.26 Horizontal scan rate: Graphic source moniVertical scan rate: tor range limits Max.
English 40 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Canada — Low-power license-exempt radio communication devices (RSS-210) a Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. b Operation in 2.
English 42 European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: • • • Article 3.1(a) Health and Safety • EN60950-1:2001 + A11:2004 • EN50371:2002 Article 3.1(b) EMC • EN301 489-1 V1.6.1 • EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless keyboard mouse set) • EN301 489-17 V1.2.1 Article 3.2 Spectrum Usages • EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless keyboard mouse set) • EN300 328 V1.7.1 • EN301 893 V1.4.
Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.
The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: z Article 3.1(a) Health and Safety -. EN60950-1 -. EN62311 z Article 3.1(b) EMC -. EN301 489-1 -. EN301 489-17 z Article 3.2 Spectrum Usages -. EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2009.
