Acer Projector P7505/F155/PF-807/P7605/F165/PFWU07/H9505BD/E255D/HE-822J/ P7305W/F125/PF-W07 Series User's Guide
Copyright © 2013. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 11/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power.
vii Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding.
viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
First things first iii viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 3 Projector Overview 4 Projector Outlook 4 Control Panel 6 Remote Control Layout 7 Getting Started Connecting the Projector Turning the Projector On/Off 9 9 11 Turning on the Projector 11 Turning the projector off 12 Adjusting the Projected Image 13 Adjusting the Height of Projected Image 13 How to optimize image size and distance 14 How to get a preferred image si
Appendices Troubleshooting 37 37 LED & Alarm Definition Listing 41 Cleaning and replacing the dust filters 42 Replacing the Lamp 43 Ceiling Mount Installation 44 Specifications 47 Compatibility modes 50 Regulations and safety notices 54
1 Product Features This product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • P7305W/F125/PF-W07 series: True 1280x800 WXGA resolution P7505/F155/PF-807/H9505BD/E255D/HE-822J series: True 1920x1080 1080p resolution P7605/F165/PF-WU07 series: True 1920x1200 WUXGA resolution Full/4:3/16:9/L.
English 2 • Microsoft® Windows® 2000, XP, Vista®, Windows® 7, Windows® 8, OS compliant • Manual lens shift adjustment Note: Functions vary depending on model definition.
3 M ZOO LAMP BACK SOUR CE MEN U TEMP ENTER This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.
Projector Overview Projector Outlook Front / upper side 8 5 MP LA CK BA SO UR CE M EN U MP TE EN R TE 9 3 4 5 10 M O ZO English 4 1 7 2 6 # Description # Description 1 Lens cap 6 Elevator feet 2 Zoom lever 7 Tilt adjusting wheels 3 Zoom Lens 8 Control panel 4 Focus ring 9 Power button 5 Remote control receivers 10 Lens shift control rings
5 2 3 4 5 6 7 8 VGA IN 1 HDMI 3 HDMI 2 9 VGA OUT 11 12 13 14 Y VIDEO Pb/Cb Pr/Cr AUDIO IN 1 AUDIO OUT HDMI 1 S-VIDEO USB A2 USB A1 10 English Rear side DC FOR WIRELESS ADAPTER 1 # Description VGA IN 2 RS232 15 16 # 17 AUDIO IN 2 WIRED REMOTE 18 19 20 Description 1 Power socket 11 2 LAN (RJ45 Port for 10/100M Ethernet) 12 3 Mini USB Ctrl connector (for firmware 13 upgrade and USB display) Audio output connector 4 USB A1 connector 14 12V DC output connector
English 6 Control Panel 6 1 SOURCE 7 2 3 8 BACK ENTER 9 2 10 4 # Icon Function 5 Description 1 LAMP Lamp Indicator LED 2 KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector. 3 Back/Stop Press "Back/Stop" to stop playing media file or go back to upper data folder. 4 MENU • • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items.
7 1 English Remote Control Layout 2 3 MEDIA SETUP 5 3D 8 4 6 7 9 32 8 3D 33 7 11 10 12 13 14 15 16 34 18 17 19 20 HOME MEDIA SETUP 6 17 21 22 25 27 29 31 # Icon Function INFO 23 24 26 28 30 23 Description 1 Infrared transmitter Sends signals to the projector. 2 3 Laser pointer POWER Aim the remote at the viewing screen. Please see "Turning the Projector On/Off" section. 4 HIDE Temporarily turns off the video.
English 8 # Icon Function 15 MENU 16 18 MOUSE_Left/ Right Click MOUSE_Four directional select keys MODE 19 20 VOLUME +/PAGE 21 Prev Next Play/Pause Description • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu.
9 English Getting Started Connecting the Projector Internet USB S-Video Output 8 D-Sub DVD player Video Output HDMI D-Sub 5 2 3 5 4 6 Y 9 7 R W HDMI USB HDMI 2 HDMI 3 USB A1 D-Sub D-Sub VGA IN 1 VGA OUT Y Y VIDEO Pb/Cb Pr/Cr B G AUDIO IN 1 AUDIO OUT HDMI 1 S-VIDEO USB A2 DC 14 FOR WIRELESS ADAPTER HDTV adapter RS232 10 AUDIO IN 2 WIRED REMOTE RS232 VGA IN 2 R 13 R B G 1 USB 12 11 11 9 3D HOME RS232 15 # 1 R B G 16 Description SETUP R W R B G RS232
English 10 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: "*" USB drive limitation, do not support power consumption over 500mA. Please have external power for USB device. Note: To enable wireless function, the USB wireless adapter must be plugged into the USB A2 port. Note: Functions vary depending on model definition.
11 Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.(Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
English 12 Turning the projector off 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
13 Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Raise the image to the desired height angle (Illustration #1), then pull out the stand feet into position. 2 Use Tilt adjusting wheel (Illustration #2) to fine-tune the display angle. 3 Use Lens shift control rings to move the image to the ideal position.
English 14 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • WUXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 41" and 62". Note: Remind as below figure, the space of 100 cm height is required when located at 2.0 m distance.
15 1080p series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 40" and 60". Note: Remind as below figure, the space of 98 cm height is required when located at 2.0 m distance. Ma x sc re e n si Mi n scre ze en s B ize 60" 40 " Height: 98 cm from base to Height: top of image 64 cm C A 2.
English 16 • WXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 39" and 59". Note: Remind as below figure, the space of 104 cm height is required when located at 2.0 m distance. Ma x sc ree n M in sc re size en s B iz e 59" 39 " Height: 104 cm from base to Height: top of image 68 cm C A 2.
17 The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • WUXGA series To obtain an image size of 60" set the projector at a distance 1.9 m and 2.9 m from the screen. A 60" Desired image size D Height: 97 cm from base to top of image 1.9 m 2.9 m C Desired Image Size Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.
English 18 • 1080p series To obtain an image size of 60" set the projector at a distance 2.0 m and 3.0 m from the screen. A 60" Desired image size D Height: 97 cm from base to top of image 2.0 m 3.0 m C Desired Image Size B Desired Distance W (cm) x H (cm) Max zoom Min zoom 30 66 x 37 1.0 1.5 Top (cm) From base to top of image 49 40 89 x 50 1.3 2.0 65 50 111 x 62 1.7 2.5 81 60 133 x 75 2.0 3.0 97 70 155 x 87 2.3 3.5 113 80 177 x 100 2.6 4.
19 WXGA series To obtain an image size of 60" set the projector at a distance 2.0 m and 3.1 m from the screen. A 60" Desired image size D Height: 105 cm from base to top of image 2.0 m 3.1 m C Desired Image Size B Desired Distance W (cm) x H (cm) Max zoom Min zoom 30 65 x 40 1.0 1.5 Top (cm) From base to top of image 53 40 86 x 54 1.4 2.1 70 50 108 x 67 1.7 2.6 88 60 129 x 81 2.0 3.1 105 70 151 x 94 2.4 3.6 123 80 172 x 108 2.7 4.1 140 90 194 x 121 3.
English 20 How to get a preferred image position by adjusting lens shift The projector is equipped with lens shift for adjusting the position of projected image right and left or up and down without requiring you to physically move the projector. Vertical Lens Shift ring Horizontal Lens Shift ring Note: The figures shown in this section are for reference only not approximate value. The figures between units can be different due to assembly tolerance.
21 • WUXGA series The vertical image height can be adjusted 20% of the image height. With the lens in the centre position the horizontal image position can be adjusted to the left or right by up to a maximum of 15% of the image width. 120%(V), 0%(H) 7.5%(H) -7.
English 22 • WXGA/1080p series The vertical image height can be adjusted between 5% and 30% of the image height. (The minimum vertical image offset is fixed at 5% of the image height above the centre of the projector lens.) With the lens in the centre position the horizontal image position can be adjusted to the left or right by up to a maximum of 15% of the image width. 130%(V), 0%(H) 7.5%(H) -7.
23 Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing "Power" button on the control pad. 2 Press the "MENU" button on the control pad to launch the OSD for projector installation and maintenance.
English 24 5 Push the menu button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
25 The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel. • When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press submenu for feature setting. • Use the using the to enter keys to select the desired item and adjust the settings by keys.
English 26 Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a bright environment. • Movie: For brighter and general movie/video/photo playing. • Dark Cinema: For dark movie content. • Game: For game content. • Sports: For sport picture. • User: Memorize user's settings.
27 Ind. Color Management Adjusts the red, green, blue, cyan, yellow and magenta colors. Ind. Hue Adjusts the color balance of red and green. Ind. Saturation Adjusts the selected color to be less or more saturated color. Ind. Gain Adjusts the selected color's contrast. Brilliant Color Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. White Peaking Increases the brightness of whites that are near 100%.
English 28 Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.
29 HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. • Auto: Automatically adjust by information from player. • Underscan: Always no overscan on HDMI image. • Overscan: Always keep overscan on HDMI image. Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "HDMI Color Range" and "HDMI Scan Info" functions are only supported under HDMI mode. Note: Functions vary depending on model definition.
English 30 Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Screen Capture Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.
31 Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings. • Select "On" to enable the security function. The user has to enter a password to operate the projector. Please refer to the "User Password" section for details.
English 32 Lock to user startup screen Default Lock User Startup Screen is "Off". If lock user startup screen is "On", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "Off" to unlock startup screen. Note: Functions vary depending on model definition.
33 ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Turn Off Mode Instant Off: Shuts down the projector without fan cooling. Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes.
English 34 Audio Volume • Press to decrease the volume. • Press to increase the volume. Mute • • Choose "On" to mute the volume. Choose "Off" to restore the volume. Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. Alarm Volume Select this function to adjust the volume of any warning notifications. Note: Functions vary depending on model definition.
35 3D Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. 24P Boost Choose "96Hz" or "144Hz" to compatible with 3D glasses. 2D to 3D 2D to 3D Support most of the 2D contents. Choose "On" to enable 2D to 3D function supported by DLP 3D technology. Please use DLP 3D glasses to have correct performance.
English 36 Language Language Choose the multilingual OSD menu. Use the select your preferred menu language. • Press to confirm the selection.
37 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image(For PC (Windows 2000/XP/ Vista/Windows 7/ Windows 8)) Solution • Connected as described in the "Getting Started" section.
English 38 3 4 5 6 7 Partial, scrolling or incorrectly displayed image (for notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus • Press "RESYNC" on the remote control or control panel. • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings.
39 9 10 11 Image is stretched when displaying a "widescreen" DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.
English 40 OSD Messages # 1 Condition Message Message Reminder • Fan Fail - the system fan is not working. • Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please check the following message. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Please refer to "Cleaning and replacing the dust filter" for details.
41 English LED & Alarm Definition Listing LED Messages Lamp LED Temp LED Power LED Red Red Red Blue Standby (power cord plugged in) -- -- V -- Power button ON -- -- -- V Lamp retry -- -- -- Quick flashing Turning off (cooling state) -- -- Quick flashing -- Turning off (cooling completed) -- -- V -- Error (thermal failure) -- V -- V Error (fan lock failure) -- Quick flashing -- V Error (lamp breakdown) V -- -- V Error (color Wheel fail) Quick flashing -- --
Cleaning and replacing the dust filters Cleaning the dust filters K LAM P ME NU SOU RCE ENT ER TEM P Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. BAC English 42 2 1 Follow these steps: 1 2 3 4 5 6 Turn the projector off. Wait for the Power LED to stop flashing then unplug the power cord.
43 Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp.
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. m m m 13 m 20 1 .9 49mm 130 mm mm 8.4 English 44 Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws.
45 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allowsfor adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
5 Adjust the angle and positioning as necessary. Tightening Screw Allen Key Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 4 25 V V SCREW SPEC. M4 x 25 mm 82.52mm English 46 ʳ 140.
47 The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.
English 48 Lamp type Keystone correction • P7505/F155/PF-807/P7605/F165/PF-WU07/P7305W/ F125/PF-W07 series: 370 W user-replaceable lamp • H9505BD/E255D/HE-822J series: 280 W user-replaceable lamp +/- 40 degrees Audio Internal speaker with 3 W x 2 output Weight 7.5 kg (16.5 Ibs.) Dimensions (W x D x H) 398 mm x 310 mm x 140 mm (15.7" x 12.2" x 5.
49 • • • • • • • AC power cord x1 • • Quick start guide x1 • • • Security card x1 VGA cable x1 Composite video cable x1 Remote control x1 Battery x 2 (for remote control) (option) User's Guide (CD-ROM) x1 User's guide (CD-ROM) x1 (for multi-media and wireless functions) Quick start guide x1 (for multi-media and wireless functions) Carrying case x1 Dust filter x1 Note: Design and specifications are subject to change without notice.
English 50 Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280X1024 1280X1024 1280X1024 1280X1024 1280x960 1280x960 1400x1050 1600x1200 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 V.
51 VGA Analog - Extended Wide timing Modes WXGA WSXGA+ 3 Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1440x900 1920x1200-RB 1680x1050 1920x1080-RB (1080P) 1366x768 V.Frequency [Hz] 60 75 85 60 120 60 60 60 60 H.Frequency [KHz] 47.8 60.3 68.6 44.8 92.9 49.6 59.9 74.0 65.3 60 67.5 60 47.7 VGA Analog -Component Signal Modes Resolution V.Frequency [Hz] H.
English 52 XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) 2 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 1280x960 1400x1050 1600x1200 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 37.9 48.1 46.9 53.7 77.4 48.4 56.5 60.0 68.7 99.0 63.8 67.5 77.1 64.0 77.0 80.0 91.1 60.0 75.
53 3 47.7 V.Frequency [Hz] 59.94 (29.97) 50(25) 59.94 50 60 50 60(30) 50(25) 23.97/24 60 50 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27.0 67.5 56.3 HDMI - Video Signal Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 4 60 Resolution 720x480(1440x480) 720x576(1440x576) 720x480 720x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 HDMI - 1.
English 54 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: ru.jan@acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.
Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
