Acer Projector P1183/M403/PE-S42/X1183A/D603P/ EV-S62T/X114/X1183/D603/EV-S62/ X113/D600/EV- S60/V10S/AS201/ X113H/X113PH/D600D/EV-S60H/ V12S/AS211/P1283/M413/PE-X42/ V12X/AX316/P1283n/M413T/ PE-X42G/X1283/X1280/D613/ EV-X62/P1383W/X1383WH/M423/ PE-W42/V12W/AW316/P1380W/ X1380WH/M420/PE-W40/V11W/ AW216/H5380BD/E230/HE-720/ P1510/P1515/M450/PE-840/ H6520BD/E240D/HE-804J Series User's Guide Downloaded From projector-manual.
Copyright © 2014. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 03/2014 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iv • • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • • • • • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
vi • • • • • • • • • • • • • • • • • • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power.
vii Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding.
viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments.
First things first iii viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 MHL (Mobile High-Definition Link) Control 7 Getting Started Connecting the Projector Turning the Projector On/Off 8 8 10 Turning on the Projector 10 Turning the projector off 11 Adjusting the Projected Image 12 Adjusting the Height of Projected Image 12 How to optimize image size and
How to login in 34 Home 35 Control Panel 35 Network Setting 36 Alert Setting 36 Logout 37 Appendices 38 Troubleshooting 38 LED & Alarm Definition Listing 42 Cleaning and replacing the dust filters 43 Replacing the Lamp 44 Ceiling Mount Installation 45 Specifications 48 Compatibility modes 52 Regulations and safety notices Downloaded From projector-manual.
1 Product Features This product is a single-chip DLP® projector.
English 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable 2 x Batteries (option) Security card User’s guide Quick start guide Carrying case (option) Dust filters (option) Remote control Downloaded From projector-manual.
3 English Projector Overview Projector Outlook Front / upper side 3 2 5 1 4 6 7 8 # 1 2 3 4 Description # Remote control receiver Power button Control panel Lamp cover 5 6 7 8 Description Zoom lever Focus ring Projection lens Tilt adjusting wheels Right / Rear side 1 5 2 2 6 7 8 3 4 9 10 11 12 1 12 4 16 15 7 10 11 Downloaded From projector-manual.
English 4 # 1 2 3 4 5 6 7 8 Description # Composite video input connector S-Video input connector Monitor loop-through output connector (for VGA IN 2 only) PC analog signal/HDTV/component video input connector (VGA, VGA IN, VGA IN 1, VGA IN 2) Security bar Audio input connector (for S-Video, Composite) Audio out connector Audio in connector (for VGA IN 1, VGA IN 2) 9 10 11 Description LAN (RJ45 Port for 10/100M Ethernet) RS232 connector Mini USB connector 12 HDMI/MHL connector (HDMI/MHL, HDMI 1/MH
5 1 English Remote Control Layout 25 3 2 5 7 9 SOURCE MEDIA MODE SETUP HIDE SOURCE 4 MEDIA 6 SETUP MODE HIDE 8 RATIO ZOOM FREEZE 11 26 ZOOM 10 FREEZE 12 13 14 Model No:E-26171 15 16 17 18 19 20 21 22 23 24 E-26110 LASER MODULE : M-5.2-6.5x10-5.5x5.5 BONTECH ELECTRONICS(K.S) CO ., LTD . No. 2018, Zhonghuayuan west road, Yushan town,Kunshan city, China MC.JG811.008 MC.JG811.009 # Icon Function Description 1 Infrared transmitter Sends signals to the projector.
English 6 # Icon Function Description 13 Four directional select keys Use up, down, left, right buttons to select items or make adjustments to your selection. 14 Pre./Rewind No function. Enter/ Play/ Pause No function. Back/Stop No function. Next/Fast forward No function. 15 KeyPad 0~9 Press "0~9" to input a password in the "Security" OSD. 16 PgUp/PgDn For computer mode only. Use this button to select the next or previous page.
7 2 SOURCE 1 MEDIA SETUP MODE HIDE FREEZE ZOOM 3 4 5 6 8 7 # Icon Component Description • Press "MODE" button for one second to activate the MHL Control Mode. • To exit, press the "MODE" button again. 1 MODE 2 SOURCE Press the "SOURCE" button to toggle between Navigation or Numeric mode. 3 MENU Press to launch the root memu. (only for Navigation mode) 4 Direction Keys Use up, down, left, right buttons to select items or make adjustments to your selection.
English 8 Getting Started Connecting the Projector DVD player, Set-top Box, HDTV receiever D-Sub 5 D-Sub W R R B G S-Video output DVD player 11 2 Video output R B G 2 12 4 W R HDMI D-Sub VGA IN 2 VGA OUT USB MHL HDTV adapter D-Sub Y HDMI 6 8 HDMI VGA IN 1 7 S-VIDEO Y 8 VIDEO / MHL AUDIO IN AUDIO OUT USB AUDIO IN RS232 USB CTRL RS232 1 8 13 9 RS232 3 RS232 10 R W Internet Downloaded From projector-manual.
9 English 5 D-Sub Video output 6 Y R B G S-Video output R B G DVD player, Settop Box, HDTV receiever 2 4 7 HDTV adapter Y D-Sub HDMI USB 1 10 DVD player HDMI 11 # USB Description # 8 Description 1 Power cord Audio cable jack/RCA 2 VGA cable 9 RS232 cable 3 Audio cable jack/jack 10 USB cable 4 VGA to component/HDTV adapter 11 HDMI cable 5 3 RCA component cable 12 MHL cable (MicroUSB to HDMI) 6 S-Video cable 13 RJ45 cable 7 Composite video cable Note
English 10 Turning the Projector On/Off Turning on the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.
11 1 To turn the projector off, press and hold the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
English 12 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel Downloaded From projector-manual.
13 Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 46" and 50". Note: Remind as below figure, the space of 88 cm height is required when located at 2.0 m distance. M ax sc re Mi n en s scre iz e en s i 50" ze B 46" Height: 80 cm C Height: 88 cm from base to top of image A 2.
English 14 • WXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 55" and 60". Note: Remind as below figure, the space of 91 cm height is required when located at 2.0 m distance. Ma x sc ree n si ze Min scre en si B ze 60" 55" Height: 91 cm from base to Height: top of image 83 cm C A 2.
15 720p series If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87". Note: Remind as below figure, the space of 130 cm height is required when located at 3 m distance.
English 16 • 1080p series If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 92". Note: Remind as below figure, the space of 132 cm height is required when located at 3 m distance.
17 The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA/XGA series To obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m from the screen. A 50" Desired image size D Height: 88 cm from base to top of image 2.0 m 2.2 m C Desired Image Size Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.
English 18 • WXGA series To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m from the screen. A 60" Desired image size D Height: 91 cm from base to top of image 2.0 m 2.2 m C Desired Image Size B Desired Distance Distance (m) Top (cm) From base to top of image 45 Diagonal (inch) W (cm) x H (cm) Max zoom Min zoom 30 65 x 40 1.0 1.1 40 86 x 54 1.3 1.5 61 50 108 x 67 1.7 1.8 76 60 129 x 81 2.0 2.2 91 70 151 x 94 2.3 2.
19 720p series To obtain an image size of 60" set the projector at a distance 2.06 m and 2.26 m from the screen. A 60" Desired image size D Height: 89 cm from base to top of image 2.06 m 2.26 m C B Desired Distance Desired Image Size W (cm) x H (cm) Max zoom Min zoom 26.57 59 x 33 0.91 1.00 Top (cm) From base to top of image 39 30 66 x 37 1.03 1.13 45 40 89 x 50 1.37 1.51 59 60 133 x 75 2.06 2.26 89 70 155 x 87 2.40 2.63 104 80 177 x 100 2.75 3.
English 20 • 1080p series To obtain an image size of 50" set the projector at a distance 1.6 m and 1.8 m from the screen. A 50" Desired image size D Height: 72 cm from base to top of image 1.6 m 1.8 m C Desired Image Size B Desired Distance W (cm) x H (cm) Max zoom Min zoom 30 66 x 37 1.0 1.1 Top (cm) From base to top of image 43 40 89 x 50 1.3 1.4 58 50 111 x 62 1.6 1.8 72 60 133 x 75 2.0 2.2 87 70 155 x 87 2.3 2.5 101 80 177 x 100 2.6 2.
21 Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing "Power" button on the control pad. 2 Press the "MENU" button on the remote control to launch the OSD for projector installation and maintenance.
22 English Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. 5 Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition. Downloaded From projector-manual.
23 The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control. • When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press submenu for feature setting. • Use the using the to enter keys to select the desired item and adjust the settings by keys.
English 24 Color Display Mode There are many factory presets optimized for various types of images. • • • • • • • • • • Bright: For brightness optimization. Presentation: For meeting presentation. Standard: For common environment. Video: For playing video in a bright environment. Game: For game content. Education: For education environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Sports: For sport picture. User: Memorize user's settings.
25 Mode Use this function to choose CT1, CT2 (Native), CT3, User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. R Bias Adjusts the red bias for color temperature optimization. G Bias Adjusts the green bias for color temperature optimization. B Bias Adjusts the blue bias for color temperature optimization.
English 26 Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.
27 Auto V. Keystone Automatically adjusts vertical image. H. Keystone Press the or button to adjust image distortion horizontally and makes a squarer image. V. Keystone Press the or button to adjust image distortion vertically and makes a squarer image. 4 Corner Correction Select a corner and adjust the position within a limited range. Before adjusting this function, please adjust H./V. Keystone function to be closer to a rectangular shape firstly. H.
English 28 Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Screen Capture Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.
29 • • • • • Press or to select the timeout interval. The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of "Timeout(Min.)" is "Off". Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.
English 30 LAN LAN Default is "Off". Choose "On" to enable LAN connection. If users want to do LAN control under standby mode, change VGA OUT (Standby) from Off to On. LAN IP/Mask Identify IP and Mask address. LAN Reset Reset LAN function. Note: Functions vary depending on model definition. Downloaded From projector-manual.
31 ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Turn Off Mode • • Instant Off: Shuts down the projector without fan cooling. • Standard: Properly shuts down the projector after fan cooling.
English 32 Audio Volume • Press to decrease the volume. • Press to increase the volume. Mute • • Choose "On" to mute the volume. Choose "Off" to restore the volume. Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. Note: Functions vary depending on model definition. Downloaded From projector-manual.
33 3D Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. 3D Format If the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result. 24P 3D Choose "96Hz" or "144Hz" to compatible with 3D glasses.
English 34 Acer LAN webpage management How to login in Open browser and enter the Server IP address by 192.168.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. Default password of administrator is "admin". And User is with normal authority with default password by "user".
35 Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Networking Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page. Downloaded From projector-manual.
English 36 Network Setting Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if projector has problem. Downloaded From projector-manual.
37 After tap Logout, you will return to login page within 5 seconds. Note: Functions vary depending on model definition. Downloaded From projector-manual.
English 38 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (for PC (Windows 2000/XP/Vista/ Windows 7/ Windows 8)) Solution • Connected as described in the "Getting Started" section.
39 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus • • Press "RESYNC" on the remote control. • If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
English 40 8 9 10 11 Image is stretched when displaying a "widescreen" DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio.
41 # 1 Condition Message Message Reminder • Fan Fail - the system fan is not working. • Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please check the following message. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Please refer to "Cleaning and replacing the dust filter" for details.
English 42 LED & Alarm Definition Listing LED Messages Lamp_LED Temp_LED Power LED Red Red Red Blue Flash ON to OFF 100ms Flash ON to OFF 100ms Flash ON to OFF 100ms -- Standby -- -- ON -- Power button ON -- -- -- ON Lamp retry -- -- -- Quick Flashing Power off (Cooling state) -- -- Quick Flashing -- Power button OFF (cooling completed; standby mode) -- -- ON -- Error (thermal failure) -- ON -- ON Error (fan lock) -- Quick Flashing -- ON ON -- -- ON Quick
43 Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. 2 1 Follow these steps: 1 2 3 4 5 Turn the projector off. Wait for the Power LED to stop flashing then unplug the power cord. Allow the projector at least 30 mins to cool down. Pull out the dust filter.
English 44 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp.
45 English Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 2 m 13 m m 0 m 1 .9 49mm mm 8.4 130 mm Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws.
English 46 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Smaller Washer Large Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
47 Adjust the angle and positioning as necessary. English 5 Tightening Screw Allen Key Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 4 25 V V SCREW SPEC. M4 x 25 mm 82.30 mm 63.81 mm 55.00 mm Downloaded From projector-manual.com Acer Manuals 85.
English 48 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.
49 • P1183/M403 PE-S42/X1183A/D603P/EV-S62T/X114/ X1183/D603/EV-S62/X113/D600/EV-S60/V10S/AS201/ X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/ M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/ X1283/X1280/D613/EV-X62 series: 27" (70 cm) ~ 300" (762 cm) • P1383W/X1383WH/M423/PE-W42/V12W/AW316/ P1380W/X1380WH/M420/PE-W40/V11W/AW216 series: 27" (69 cm) ~ 300" (762 cm) • H5380BD/E230/HE-720 series: 27" (67 cm) ~ 300" (762 cm) • P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J series: 42" (106 cm) ~ 300" (762 cm) Proj
English 50 Keystone correction ±40 degrees Audio P1183/M403/PE-S42/X1183A/D603P/EV-S62T/P1283/ M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/ X1283/X1280/D613/EV-X62/P1383W/X1383WH/M423/ PE-W42/V12W/AW316/P1380W/X1380WH/M420/PEW40/V11W/AW216/H5380BD/E230/HE-720/P1510/ P1515/M450/PE-840/H6520BD/E240D/HE-804J: Internal speaker with 2 W output Weight 2.5 ~ 2.7 Kg (5.51 ~ 5.95 Ibs) Dimensions (W x D x H) 314 mm X 223.4 mm X 93.4 mm (12.4" x 8.8" x 3.
51 X113H/ X113PH/ D600D/ EV-S60H/ V12S/ AS211/ VGA IN 1 X X V V V X X VGA IN 2 X X V V V X X VGA output X X V V V X X 3.5 mm audio jack input 1 X X V V V V V S-Video V V V V V V X Composite video V V V V V V V 3.5 mm audio jack input 2 X X V V V X X 3.
English 52 Compatibility modes A.
53 VGA Analog - Extended Wide timing Modes WXGA WSXGA+ WUXGA 3 Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 *1280x800-RB *1920x1200 1440x900 1680x1050 1920x1080 (1080P) 1366x768 1920x1200-RB V.Frequency [Hz] 60 75 85 60 120 60 119.909 60 60 60 H.Frequency [KHz] 47.8 60.3 68.6 44.8 92.9 49.6 101.6 74 59.9 65.3 60 67.5 60 59.94 47.7 74.04 VGA Analog -Component Signal Modes Resolution V.Frequency [Hz] H.
English 54 SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) 2 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 1280x960 1400x1050 1600x1200 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.
55 WUXGA 3 4 60 60 60 59.9 74 65.3 60 67.5 60 59.94 47.7 74.04 HDMI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p *1080p 720x480(1440x480) 720x576(1440x576) 720x480 720x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1200 59.94 (29.97) 50(25) 59.94 50 60 50 60(30) 50(25) 23.97/24 60 50 59.94 15.7 15.6 31.5 31.6 45.0 37.5 33.8 28.1 27.0 67.5 56.3 74.04 HDMI - 1.
English 56 1080p (Side by Side (Half)) 1920 x1080 60 Horizontal scan rate: Graphic source monitor Vertical scan rate: range limits Max. pixel rate: 67.5 15k-100kHz 24-120 Hz 165 MHz C.
FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English 58 Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: ru.jan@acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.
Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
