Acer LCD TV AT3704 AT3202/AT3204 AT2703/AT2704 AT2602/AT2604 User's Guide Contents Important safety instructions 4 First things first 7 Basic features and benefits of your Acer LCD TV Packing checklist Your LCD TV overview Front panel view Bottom panel view Remote control General keys Teletext Basic connections Connecting the power cord Setting up the remote control Enjoying analog TV Connecting an antenna/cable Getting started watching your TV Connecting external audio/video devices Connecting a
Copyright © 2006. Acer Incorporated. All Rights Reserved. Acer LCD TV User's Guide Original Issue: January 2006 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
Read these instructions carefully. Please put them somewhere safe for future reference. 1 Follow all warnings and instructions marked on the product. 2 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3 Do not use this product near water. 7 Do not allow anything to rest on the power cord. Do not locate this product where the cord will be stepped on.
English 14 Some products are equipped with a three-wire electrical grounding-type plug that has a third pin for grounding. This plug only fits into a grounded electrical outlet. This is a safety feature. Make sure the AC outlet is properly grounded. Do not defeat the safety purpose of the grounding-type plug by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact your electrician to replace the obsolete outlet.
English EN55013: 2001+A1: 2003: Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics Limits and methods of measurement. EN55020: 2002+A1: 2003: Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement. EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methods of measurement of Radio Interference characteristics of Information Technology Equipment.
English 2. High power radar are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. 3. An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty. Canada — Low-power license-exempt radiocommunication devices (RSS-210) A.
English First things first We would like to thank you for making the Acer LCD TV your choice. With proper care, your new Acer LCD TV will provide you with years of entertainment and satisfaction. This User's Guide introduces you to the various features your LCD TV can offer, and provides clear and concise information about the product, so please read it thoroughly and retain it for future reference.
AT3704 English Your LCD TV overview AT3202/AT3204 Front panel view 1 Volume up/down 2 Input key 3 Menu key 4 Channel up/down 5 Headphone jack AT2703/AT2704 AT2602/AT2604 POWER PUSH 1 2 3 4 5 Volume up When the OSD is on, functions the same as the Right arrow Volume down When the OSD is on, functions the same as the Left arrow 2 Input key When the OSD is on, press this button to confirm selection 3 Menu key Turns the OSD menu ON and OFF Channel up When the OSD is on, function
Power switch 2 AC-in 3 *HDMI-in 4 VGA-in 5 **DVI-in 6 Audio-in 7 AV-in 8 SCART x 2 9 Analog antenna-in English Bottom panel view 1 AT3704/AT3204/AT2704/AT2604 1 2 3 4 5 6 7 8 9 4 5 6 7 8 9 6 7 8 9 AT2703 1 2 AT3202/AT2602 1 2 4 For AV3, Composite and component inputs share the same audio ports. * HDMI only for AT2604/AT2704/AT3204/AT3704 ** DVI only for AT2604/AT2703/AT2704/AT3204/AT3704 9 7in1_User Guide_EU.
English Remote control General keys 1 5 4 2 MUTE Press to toggle audio on and off. 3 VOL (up/down) Press this buttons to increase or decrease the volume. 4 CH (up/down) Press this buttons to sequentially select the TV channel. 5 Number keys. 6 RECALL Press to return to the previous channel. 7 ENTER Press to confirm channel number selection. 8 Input buttons (TV/AV/SCART/PC) Press to select correct input mode.
Teletext 2 3 English 1 4 5 6 7 8 9 1 INDEX Press to go to the index page 2 SUBTITLE Press to view subtitles on the screen. 3 REVEAL Press to reveal hidden telext information 4 TELETEXT Press to switch from TV/AV to Teletext mode. 5 SIZE Press once to zoom teletext page to 2X. Press again to resume. 6 MIX Press to overlay teletext page on the TV image. 7 HOLD Press to pause the current teletext page in multi-page viewing mode. 8 SUBPAGE Press to access the teletext’s subpages directly.
English Basic connections Connecting the power cord 1 Connect the AC cord into the AC input on the back of the set. 2 Connect the plug to the wall outlet as shown. Setting up the remote control 1 Open the cover on the back of the remote unit. Looking after your remote control Kid 2 • Handle the remote control with care. Dropping, wetting or placing the remote control in sunlight may damage it. • Do not tamper with batteries. Keep them away from children.
English Enjoying analog TV Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back of the TV set as shown below. Analog Getting started watching your TV 1 4 1,3 2 I O 1 Power I O a. Turn on the power switch beneath the screen. 1 b. Press the power button, number keys or channel up/down button on the remote control.
English Setup Wizard Step 1. Select the setup language you prefer. 2 Step 2. Please select country. Step 3. Ensure that your co-axial cables are connected correctly before proceeding (see page 12 for details). 14 7in1_User Guide_EU.
Setup Wizard English Step 4. Scan for analog channels. 2 Step 5. Setup is now complete. You are ready to begin watching TV. If you leave the setup process before it is complete, you will be given a choice of options: 1. Resume setup 2. Resume setup at next startup 3. Exit and don't remind me Select an option and press OK to exit. Changing channels a. Press 0-9 on the remote control to select a channel. The channel changes after 2 seconds. Press ENTER to select the channel immediately. 3 b.
English Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the SCART port located at the rear of your LCD TV as shown below.
English Connecting a camera, camcorder, video game or headphones Connect your camera or camcorder to the video/audio ports on the bottom of the TV set as shown below. Connecting a PC or notebook computer To display PC output on your TV, connect your PC or notebook computer to the TV as shown below. DVI D-Sub or D-Sub DVI or For VGA and DVI input, Acer recommends setting your PC’s external monitor resolution to 1360 x 768 pixels @ 60 Hz refresh rate.
English OSD navigation Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below. Basic operations required to navigate these menus (Picture, Audio, Channel management, Options, Settings, Empowering) are described in this section. The first time you access the OSD, you will be asked to choose your language settings.
Adjusting the OSD settings English The OSD can be used for adjusting the settings of your LCD TV. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings, general settings and the Empowering Technology settings. For advanced settings, please refer to following page: Adjusting the picture quality 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select Picture from the OSD.
English Empowering Technology Less than 2 seconds MENU Default setting in different mode Set-up Empowering mode More than 2 seconds The Empowering Key opens up the Acer Empowering Technology functions. In TV mode, the choice is between Scenario mode and Favourite channel; see page 21 for details. The default setting for both modes is Scenario mode. Set-up Empowering mode To change your Empowering Key's default setting: 1 Press and hold the Empowering Key for more than two seconds to open the menu.
Default setting in different Empowering mode English Scenario mode in TV (default setting) Scenario mode has five preset viewing modes designed to give you the best picture quality when watching a particular kind of programme. There are five pre-defined audio and video settings for optimal enjoyment of the following scenarios: Standard TV, Movie, Sport, Concert, Game, User. Pressing the Empowering Key for less than two second will toggle between the different modes.
English Advanced features PIP/PBP/POP • Press the PIP/PBP/POP button once to display activate picture-inpicture (PIP). • Press twice to activate picture-by-picture (PBP). • Press three times to activate picture-on-picture (POP).Then, the POP screens will display the TV channel programmes one by one. PIP POP POP PBP POP POP POP PIP (Picture-in-Picture) PBP (Picture-by-Picture) POP (Picture-on-Picture) 1.
English 1a. Press the ACTIVE key to toggle between PBP screens. 1b. Press the TV, AV, SCART or PC keys, number keys or CH up or down to change the content of the active screen. PBP PBP 2. Press the SWAP key to change the content between the primary and the PBP screen. Swap PBP 1a. Press the ACTIVE key to toggle between POP screens. 1b. Press the number keys or CH up or down to change the TV channel on the active screen. POP 1+5 POP POP 2.
English Lock TV Locking TV content Lock TV is a handy feature that can block a single channel, multiple channels or all TV sources. Lock TV allows you to enter a password and effectively stop anyone without the password from watching TV. MENU To enable this feature: Setting a personal PIN MENU Press the MENU key on the remote control to bring up the OSD. 1 Use the directional keys to navigate to the (see note) 2 Settings menu. Then select Set PIN. MENU 3 Enter a four-digit password.
1 English Locking a single channel Navigate to the channel you wish to manage. MENU Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate to the Lock This Channel. 3 Channel management menu. Then select MENU 4 Enter your PIN. Type it again and press OK to reconfirm.(see page 24) Locking your TV MENU Press the MENU key on the remote control to bring up the OSD. 1 Use the directional keys to navigate to the 2 Settings menu. Then select Lock TV.
English Re-scan for channels The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: MENU Scanning for channels MENU 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. MENU Highlight Auto Scan. Then, select Start and press OK to begin. 3 MENU MENU 4 Select OK and press MENU to exit. 26 7in1_User Guide_EU.
Widescreen display mode English Your Acer LCD TV has a special widescreen mode that allows you to toggle between 4:3, 16:9, Panorama, and Letterbox 1, 2 and 3. type views. Press the WIDE key on the remote control to toggle the display between the four wide modes. Wide mode The Acer LCD contains four widescreen modes, including 4:3, 16:9, Panorama, and Letterbox 1, 2 and 3. 4:3 For 4:3 standard pictures. A side bar appears on each side.
English Dimensions AT3704 1141.2 824.5 687.5 639.5 465.8 40.1 87.9 651.2 400 100 100 123 284.6 Unit: mm 28 7in1_User Guide_EU.
English AT3202/AT3204 979.9 700.6 600.3 530.0 395.3 103.5 64.2 452.7 138.7 400.0 100.0 100.0 251.5 Unit: mm 29 7in1_User Guide_EU.
English AT2703/AT2704 338.6 854 599.6 P OWE R P US H 400 48.7 123.3 100 463.6 527.1 100 100 207.8 Unit: mm 30 7in1_User Guide_EU.
English AT2602/AT2604 247.29 325.60 853.94 577.60 POW ER PUS H 48.65 399.92 100 100 463.58 527.09 100 123.25 207.76 Unit: mm 31 7in1_User Guide_EU.
English Appendix-Source Options PIP/PBP SCART1 SCART2 AV3 X X X X SCART1 X X X X SCART2 X X X X AV3 X X X X VGA TV TV Main Sub VGA X POP SCART1 SCART2 AV3 VGA TV TV X X X X SCART1 X X X X X SCART2 X X X X X AV3 X X X X X VGA X X X X X Main Sub : Supported X: Not supported 32 7in1_User Guide_EU.
English Troubleshooting Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound. • Make sure the power cord is properly inserted in the power outlet. • Make sure the input mode is correctly set by your selected input. • Make sure the antenna at the rear of the TV is properly connected.
English Product specifications Model Panel spec Resolution (pixels) Brightness (tpe.) Contrast Ratio (tpe.) Display color Viewing angle (tpe.) Response (tpe.) Power supply Input Max.
AT2703/AT2704 AT2602/AT2604 1366 x 768 500 nits 1000:1 16.7 M H: 176o ; V:1760 8ms (gray to gray) 1366 x 768 500 nits 600:1 16.7M H:170o ; V:170o 16ms (gray to gray) 90V~264V -AC. (47 ~ 63 HZ) 150 W 5W 90V~264V -AC. (47~63 HZ) 150W 5W 854 x 527 x 207 15.5 34.2 16.5 36.4 200 x 100 854 x 527 x 207 15.5 34.2 16.5 36.4 200 x 100 PAL, SECAM B/G/D/K/I/L (multi-European) NICAM/A2 PLL, 45.25Mhz-862.25Mhz Teletext 1.5 1 PAL, SECAM B/G/D/K/I/L (multi-European) NICAM/A2 PLL, 45.25Mhz-862.25Mhz Teletext 1.