Analog LCD Monitor AL1502 User’s Manual
TABLE OF CONTENTS FCC compliance statement ........................................................................ 1 DOC compliance notice ............................................................................. 1 Introduction ................................................................................................ 2 Features ..................................................................................................... 2 Unpacking .........................................................
AL1502 E-1 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide resonable protection against radio frequency interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause interference to radio communications.
E-2 User’s Guide INTRODUCTION Congratulations for purchasing model AL1502, a high performance 15-inch color TFT LCD monitor. The AL1502 monitor provides flicker-free and color images at optional resolutions. Through this user guide, we will introduce you step-by-step all the features, functions and technical specifications of the LCD monitor. Surely you will have a refreshing experience working with the monitor.
AL1502 E-3 UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.
E-4 User’s Guide Attaching / Removing the Base Install: Align the four hooks on the bottom of the monitor with the corresponding slots on the bottom of the base. Remove: Depress the hook as indicated first before removing the base and follow the arrow direction to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.
AL1502 E-5 CONNECTING THE POWER CORD · · · · · Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
E-6 User’s Guide PRESET MODES To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern. If the mode in use does not match one of the defaults, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 9 user modes.
AL1502 E-7 POWER SAVING The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Power Consumption LED Light ON Normal Green Active OFF <3W Amber The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds.
E-8 User’s Guide INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the video cable to the computer. 2. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3. Connect the Audio Cable. 4. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 5.
AL1502 E-9 USER CONTROLS 3 4 5 6 1 2 Front Panel Controls 1. Power Switch: To turn ON or OFF the power. 2. Power LED: Lights up to indicate the power is turned ON. 3. Auto Adjust button / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2) When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. 4.
E-10 User’s Guide HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4.
AL1502 Main Menu Icon Sub Menu Icon Sub Menu Item E-11 Description H. Position Adjust the horizontal position. V. Position Adjust the vertical position. N/A Warm Set the color temperature to warm white. N/A Cool Set the color temperature to cool white. User /Red User/Green Adjusts Red/Green/Blue intensity. User/Blue N/A English N/A N/A Deutsch N/A Francais N/A Espanol N/A Italiano N/A N/A Multi-language selection.
E-12 User’s Guide Main Menu Icon Sub Menu Icon Sub Menu Item Description H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Timeout Adjust the OSD timeout. N/A Auto Config Auto Adjust the H/V Position, Focus and Clock of picture. N/A Information Show the resolution, H/V frequency and input port of current iput timing. N/A Reset Clear each old status of Autoconfiguraation and set the color temperature to Cool.
AL1502 E-13 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problems Current Status Remedy LED ON Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF Check the power switch. Check if AC power cord is properly connected to the monitor. No Picture LED displays amber color Check if video signal cable is properly connected at the back of monitor.
E-14 User’s Guide SPECIFICATION LCD Panel Driving system TFT Color LCD Size 38.1cm(15.0") Pixel pitch 0.297mm( H )x 0.297mm( V ) Brightness 250cd/m2 (Typical) Contrast 350:1(Typical) Viewable angle 1400 (H) 1250 (V) Response time 25 ms Video R,G,B Analog Interface H-Frequency 30KHz - 61KHz V-Frequency 55-76Hz Display Colors 16.2M Colors Dot Clock 80MHz Max.
AL1502 Environmental Considerations Operating Temp: 50 to 350C Storage Temp.: -200 to 600C Operating Humidity: 10% to 85% Dimensions 340(W) x 326(H) x 180(D)mm Weight (N. W.) 3.5kg Unit (net) Switch Auto Adjust Key >/ Volume