Table of Contents Preface ............................................................................................2 Chapter 1 Installation ....................................................................4 Unpacking............................................................................................................4 Connecting the LCD Monitor and Base.................................................................4 Viewing Angle Adjustment......................................................
Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved.
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Detaching LCD Monitor from Its Stand 1. Unscrew screws of the hinge bracket 2. Remove the stand from LCD monitor (See fig. 1-3) Figure 1-3 Interface for Arm Applications Before installing to mounting device, please refer to Fig.1-3. The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.
Connecting the AC Power 1. Connect the power cord to the AC adapter. (See Fig. 1-6) 2. Connect the AC adapter's DC output connector to the DC Power Jack of the monitor. 3. Connect the power cord to an AC power source. Figure 1-6 Warning We recommand to install a "Surge Protector" device between the AC Adapter and the electrical wall outlet for adding protection against power surges to prevent the effects of sudden voltage variations from reaching the LCD Monitor.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 DC Power Switch Press the power switch to switch the monitor ON/OFF. 2 DC Power-On Indicator LED lights Green color --- Power is ON. LED lights Yellow --- Monitor is in "Power Saving Mode". LED is off --- Power is OFF. 3 Function Select Buttons Press either left or right control button for OSD (On Screen Display) menu selection.
Function Description Icon Function Brightness This function increases or decreases the brightness of the image. Contrast This function increases or decreases the difference between the dark and light color. H-Position This function shifts the entire display image left or right. V-Position This function shifts the entire display image up or down. Phase Clock Auto Adjustment A total of 32 scales (0 to 31) are available to adjust the focus and clarity of the display.
User Three colors (Red, Green, Blue) can be adjusted from the OSD menu 9 Sets the settings to a by user defined CIE Temperature.
Chapter 3 Technical Information Specifications LCD Panel Hannstar AU Size 15.0" (38 cm) 15.
Power Management Mode Power Consumption* AC Input LED Color On 25W maximum 240 VAC Green Standby 5W maximum 240 VAC Yellow Suspend 5W maximum 240 VAC Yellow Off 5W maximum 240 VAC Yellow DC Power Off 5W maximum 240 VAC Dark Disconnected 5W maximum 240 VAC Yellow: Standby, Suspend, Off Dark: DC Power off * Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
Pin Assignment Signal 6 PIN 1 11 5 15 10 1 2 3 4 5 6 7 8 Description Red Green Blue Digital GND Digital GND Red Rtn Green Rtn Blue Rtn Signal PIN Description 9 10 11 12 13 14 15 +5V NC Digital GND SDA H. Sync. V. Sync. SCL Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution H. Freq. (KHz) V. Freq. 640 x 350 (Hz) Pixel Freq. (MHz) H/V Sync. Polarity 31.469 70.087 25.
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
