Veriton Series User's Guide
Copyright © 2006. Acer Incorporated. All Rights Reserved. Veriton Series User's Guide Original Issue: 08 / 2006 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
i Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Warnings • • • • • Do not use this product near water. Do not place this product on an unstable cart, stand or table.
• circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature.
iii Replacing the battery pack The notebook uses lithium batteries. Replace the battery with the same type as that which came bundled with your product. Use of another battery may present a risk of fire or explosion. Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children. Follow local regulations when disposing of used batteries.
Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury. Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders.
v Eyes • • • Rest your eyes frequently. Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. Blink frequently to keep your eyes from drying out. Display Keep your display clean. • • • • • • Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.
Safety instructions Disposal instructions Tips and information for comfortable use i i iii iv Empowering Technology 1 Acer Empowering Technology 3 Empowering Technology password Acer eSettings Management Acer eLock Management Acer eDataSecurity Management Acer ePerformance Management Acer eAcoustics Management Using Acer eAcoustics Management Acer eAcoustics Management Main Page Acer eRecovery Management 3 4 5 6 8 9 9 10 11 1 First things first 13 Specifications Package contents Accessing the User
Optical drive Taking care of your CDs and DVDs 32 35 Hard disk 35 3 Setting up your computer 37 Arranging a comfortable work area 39 Adjusting your chair Positioning your PC Positioning your monitor Positioning your keyboard Positioning your mouse Connecting peripherals Connecting your mouse and keyboard USB interface PS/2 interface Connecting a monitor Connecting the power cable Turning on your computer Turning off your computer Connecting options Connecting your printer Connecting the modem (o
To replace the side panel Upgrading your computer Installing additional memory To remove a DDR2 DIMM To install a DDR2 DIMM To reconfigure your computer Replacing the Veriton 3900Pro's hard disk Installing an expansion card Replacing the Veriton 5900Pro's hard disk Installing an expansion card Replacing the Veriton 69/7900Pro's hard disk Installing an expansion card 59 60 60 60 61 62 62 65 65 66 67 68 5 System utilities 69 Adobe Reader NTI CD&DVD-Maker (for models with CD or DVD Burner) PowerDVD (for
European Union (EU) The FCC RF safety requirement Canada — Low-power license-exempt radio communication devices (RSS-210) Federal Communications Comission Declaration of Conformity Declaration of Conformity for CE marking Index 95 95 96 97 98 99
Empowering Technology
Acer's innovative Empowering Technology makes it easy for you to access frequently used functions and manage your new Acer desktop.
3 Acer Empowering Technology Acer's innovative Empowering Technology toolbar makes it easy for you to access frequently used functions and manage your new Acer computer. Displayed by default in the upper-right corner of your screen, it features the following handy utilities: • Acer eSettings Management accesses system information and adjusts settings easily. • Acer eLock Management limits access to external storage media and interfaces.
4 Empowering Technology Acer eSettings Management Acer eSettings Management allows you to inspect hardware specifications, change BIOS passwords or other Windows settings, and to monitor the system health status. Acer eSettings Management also: • Provides a simple graphical user interface for navigation. • Displays general system status and advanced monitoring for power users on Acer computer.
5 Acer eLock Management Acer eLock Management is a security utility that allows you to lock your removable data, optical and floppy drives to ensure that data can't be stolen while your computer is unattended. • Removable data devices — includes USB disk drives, USB pen drives, USB flash drives, USB MP3 drives, USB memory card readers, IEEE 1394 disk drives and any other removable disk drives that can be mounted as a file system when plugged into the system.
6 Empowering Technology Acer eDataSecurity Management Acer eDataSecurity Management is a handy file encryption utility that protects your files from being accessed by unauthorized persons. It is conveniently integrated with Windows Explorer as a shell extension for quick and easy data encryption/decryption and also supports on-the-fly file encryption for MSN Messenger and Microsoft Outlook. The Acer eDataSecurity Management setup wizard will prompt you for a supervisor password and default encryption.
7
8 Empowering Technology Acer ePerformance Management Acer ePerformance Management is a system optimization tool that boosts the performance of your Acer computer. It provides an express optimization method to release unused memory and disk space quickly. The user can also enable advanced options for full control over the following options: • Memory optimization — releases unused memory and check usage. • Disk optimization — removes unneeded items and files.
9 Acer eAcoustics Management Acer eAcoustics Management offers you a useful tool to balance your computing power needs with your desired level of quietness. By reducing the processor speed for tasks that require less processing, the CPU and system fans can run slower, thus reducing the amount of sound generated by these components.
10 Empowering Technology Acer eAcoustics Management Main Page Listed on the main page are two options for Acer eAcoustics Management, labeled as Quiet and Professional. Select the mode that suits your working requirements best, and exit the utility to apply the settings. Quiet Use this mode for tasks that require low processing power, like word processing, Web browsing, and instant messaging. This mode creates the lowest audio disturbance.
11 Acer eRecovery Management Acer eRecovery Management is a powerful utility that does away with the need for recovery disks provided by the manufacturer. The Acer eRecovery Management utility occupies space in a hidden partition on your system's hard drive. By default, user-created backups are stored on the D:\ drive. Acer eRecovery Management provides you with: • Password protection. • Recovery of applications and drivers. • • Image/data backup: • Back up to HDD (set recovery point).
12 Empowering Technology Note: If your computer did not come with a Recovery CD or System CD, please use Acer eRecovery Management's "System backup to optical disk" feature to burn a backup image to CD or DVD. To ensure the best results when recovering your system using a CD or Acer eRecovery Management, detach all peripherals (except the external Acer ODD, if your computer has one), including your Acer ezDock.
1 First things first
This chapter describes the system specifications and contents of your computer package.
15 Specifications Operating system Platform Genuine Microsoft ® Windows® XP Professional Edition Genuine Microsoft® Windows® XP Home Edition Intel® Celeron® with 533 MHz FSB Intel® Celeron® D with 533 MHz FSB Intel® Pentium® 4 with 533/800 MHz FSB Intel® Pentium® D with 800/1066 MHz FSB Chipset Intel® Q965 Express System memory Dual channels supported on four DIMMs Supporting up to 4 GB of DDR2 533/667/800 RAM Drives Veriton 3900Pro: External 5.25" drive bays 3.
16 1 First things first Graphics Intel® Graphics Media Accelerator 3000 (Intel® GMA 3000) with Dynamic Video Memory Technology (DVMT) support Audio Realtek ALC888 with embedded Intel® HDA CODEC Keyboard PS/2 or USB multimedia keyboard Monitor Choice of Acer CRT or LCD monitors Security Lock pad and intrusion alert Housing Veriton 3900Pro Series: 345 (H) x 101.3 (W) x 414.7 (D) mm Veriton 5900Pro Series: 370 (H) x 130.
17 Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents.
18 1 First things first
2 System tour
This chapter discusses the features and components of your computer.
21 Features Here are just a few of your computer's many features: Performance • Intel® Celeron® supporting front side bus (FSB) up to 533 MHz, Intel® Celeron® D supporting FSB up to 533 MHz, Intel® Pentium® 4 supporting FSB up to 533/800 MHz, or Intel® Pentium® D supporting FSB up to 800/1066 MHz • Intel® Q965 Express chipset • DDR2 667/800, 4 DIMM slots, expandable to 4 GB dual-channel memory • Power management function • CD-ROM, CD-RW, DVD-ROM, DVD/CD-RW combo, DVD-Dual or DVD-Super multi drive
22 Front panel Your computer's front panel consists of the following: Veriton 5900Pro Veriton 6900Pro 2 System tour
23 Veriton 3900Pro/Veriton 7900Pro Icon Component 5.25" drive bay(s) Veriton 3900Pro/ 5900Pro 1 Veriton 6900Pro/7900Pro 1 3.
24 Rear panel Your computer's rear panel consists of the following: Veriton 5900Pro Veriton 6900Pro 2 System tour
25 Veriton 3900Pro/Veriton 7900Pro Icon Component # Power supply 1 Power cord socket 2 Voltage selector switch 3 PS/2 mouse port 4 PS/2 keyboard port 5 Serial port 6 Parallel/printer port 7 CRT/LCD monitor port 8 USB ports 9 Network port 10
26 Icon 2 System tour Component # Audio jack 11 Expansion slots 12 Chassis lock pad 13 Hardware reset button 14* *. Only for Veriton 6900Pro / Veriton 7900Pro Audio jacks function table Color/Use Headphone 1.1 CH 3.1 CH 5.1 CH 7.
27 Keyboard The keyboard has full-sized keys that include separate cursor keys, two Windows keys, four multimedia keys, and 12 function keys. For information on how to connect your keyboard, see "Connecting your mouse and keyboard" on page 41. No. Description No.
28 2 System tour Internet/Email/Search keys Icon Key Description Web browser Launches your current default browser. Email Launches your email application. Search Opens a search window. Multimedia keys Allow you to conveniently play, pause, stop, advance or rewind a song or movie using your keyboard. Icon Key Description Backward Press to skip backward to the previous track or video file. Play/pause Press to start playing the audio track or video file. Press again to pause.
29 Volume control/mute keys Icon Key Description Volume up Press to increase audio volume. Volume down Press to decrease audio volume. Mute Toggle sound on/off. Lock keys The keyboard has three lock keys which you can toggle on and off to switch between functions. Lock key Description e (Scroll Lock) When "e" is activated, press to run Acer Empowering Technology. When "Scroll Lock" is activated, the screen moves one line up or down when you press the up arrow or down arrow, respectively.
30 2 System tour Cursor keys The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off. Windows keys The keyboard has two keys that perform Windows-specific functions. Key Description Windows Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu.
31 Key Description Application This key has the same effect as clicking the right mouse button; it opens the application's context menu. key Function keys The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them. Palm rest The detachable palm rest provides you with a comfortable place to rest your hands while typing.
32 2 System tour Optical drive Your computer may come with a CD-ROM, DVD-ROM, DVD/CD-RW combo, DVD-Dual or DVD-Super multi drive. This drive is located on the front panel of your computer. The CD drive allows you to play different types of compact disks (CDs). The DVD drive allows you to play not only old CD-ROMs, CD-I disks, and video CDs, but digital video disks (DVDs) as well. DVD-ROM is a type of disk media with enough storage space for a full-length movie.
33 Veriton 6900Pro/7900Pro 2. When the disk tray slides open, place the CD or DVD gently on the tray. Make sure that the label or title side of the disk is facing upward. When holding a disk, hold it by the edges to avoid leaving smudges or fingerprints.
34 2 System tour Veriton 5900Pro Veriton 6900Pro/7900Pro 3. Push the tray and it will close automatically.
35 Taking care of your CDs and DVDs • Keep your disk in its case when not in use to avoid scratches or other damage. Any kind of dirt or damage can affect the data on the disk, impair the disk lens reader on the CD or DVD drive, or stop the computer from successfully reading the disk. • When handling disks, always hold them by the edges to avoid smudges or fingerprints. • When cleaning disks, use a clean, dust-free cloth and wipe in a straight line from the center to the edge.
36 2 System tour
3 Setting up your computer
This chapter contains step-by-step instructions on how to set up your computer and connect additional peripherals.
39 Arranging a comfortable work area Working safely and comfortably begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Refer to the diagram on the following page as you set up your system. Here are some points to consider: Adjusting your chair Having the right kind of chair does not necessarily mean you'll be properly supported.
40 3 Setting up your computer Take note of the following when selecting a location for your computer: • Do not put your computer near any equipment that might cause electromagnetic or radio frequency interference, such as radio transmitters, televisions, copy machines or heating and air-conditioning equipment. • Avoid dusty areas and extremes of temperature and humidity.
41 Connecting peripherals Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary in select countries. Connecting your mouse and keyboard USB interface Plug your USB mouse or keyboard cable into any of the USB ports on the front and rear panels of your computer.
42 3 Setting up your computer Connecting a monitor To connect a monitor, simply plug the monitor cable into the monitor port (blue port) located on the rear panel of your computer . Note: When a VGA card is added to the PCI Express slot, the monitor should be connected to the add-on card and the onboard VGA will be disabled. Note: Refer to the monitor manual for additional instructions and information.
43 Connecting the power cable Caution: Before you proceed, check the voltage range in your area. Make sure that it matches your computer's voltage setting. If they don't match, change your computer's voltage setting according to your area's voltage range. Set the voltage selector switch to the voltage range applicable to your area (a). Plug the power cable into the power cable socket located on the rear panel of your computer (b). Then plug the other end of the power cable into a power outlet (c).
44 3 Setting up your computer Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: 1 Turn on all peripherals connected to your computer, such as the monitor, printer, speakers, etc. 2 On the front panel of your computer, press the Power button. Important: Make sure that the power cable is properly plugged into an electrical outlet.
45 Connecting options Connecting your printer Your computer supports parallel, serial and USB printers. To connect a parallel printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer. Note: The printer shown below is for your reference only. Actual device model may vary by country. Note: If you are using a serial printer, connect the printer cable into the serial port located on the rear panel of your computer.
46 3 Setting up your computer Connecting the modem (optional) Set up your modem connection by plugging the telephone line and handset line your computer. into their corresponding ports on the rear panel of Connecting to the network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port the rear panel of your computer.
47 Connecting multimedia devices You can connect multimedia devices such as microphones, earphones or headphones, external speakers and audio line-in devices. These devices will let you take advantage of your computer's multimedia features. Note: The multimedia devices shown below are for reference only. Actual device models may vary in select countries. Plug the devices in as follows: • Microphone: Connects to the Microphone-in jacks on the front and rear panels of your computer.
48 • 3 Setting up your computer Earphones, headphones: Connect to the headphone jack the front panel of your computer. located on Note: To adjust the headphone volume, use the volume control buttons on the keyboard. You can also adjust the volume by using the volume icon on the taskbar at the bottom of your screen. • External speakers: Connect to the audio-out/line-out jack jack) located on the rear panel of your computer.
49 • Audio line-in device: Connects to the audio-in/line-in jack (light blue jack) located on the rear panel of your computer Connecting USB devices Universal Serial Bus (USB) is a serial bus design capable of cascading peripherals such as a digital camera, keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with eight external USB ports: four on the front and four on the rear panel. These ports support USB 2.
50 3 Setting up your computer Note: The USB devices shown below are for reference only. Actual device models may vary by geographic region. Note: Some USB devices have a built-in USB port which permits you to connect more USB devices.
4 Upgrading your computer
This chapter contains instructions on how to upgrade your computer, and basic information about your system boards that you will find helpful when performing the upgrade process.
53 Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.
54 4 Upgrading your computer Post-installation instructions Observe the following after installing a computer component: 1 See to it that the components are installed according to the step-by-step instructions in their respective sections. 2 Replace any expansion boards or peripherals that you removed earlier. 3 Replace the side panels. 4 Connect the necessary cables and turn on your computer.
55 Opening your computer 3900Pro Caution: Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 53. You need to open your computer before you can install additional components. See the following section for instructions. To remove the computer cover 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface.
56 4 Upgrading your computer To replace the computer cover 1 Align the cover’s hinges to the housing frame; then gently push it in to slide it back into place. Secure the cover with thumbscrews.
57 Opening your Veriton 5900Pro Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 53. You need to open your computer before you can install additional components. See the following section for instructions: To remove the computer cover 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface.
58 4 Upgrading your computer Opening your Veriton 6900Pro/ 7900Pro Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 53. You need to open your computer before you can install additional components. See the following section for instructions: To remove the side panel 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface.
59 Veriton 7900Pro To replace the side panel 1 Align the side panel's hinges to the housing frame and then push it in to slide it back into place. 2 Secure the side panels with the two screws.
60 4 Upgrading your computer Upgrading your computer Certain components of your computer are upgradeable, such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the "Installation precautions" on page 53 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself. If you want to replace or upgrade any of these components, contact your dealer or a qualified service technician for assistance.
61 3 Press the holding clips on both sides of the DDR2 DIMM socket outward to release the DDR2 DIMM (a). Gently pull the DDR2 DIMM out of the socket (b). To install a DDR2 DIMM 1 Locate the DDR2 DIMM socket on the mainboard. 2 Align the DDR2 DIMM with the socket (a). Press the DDR2 DIMM into the socket until the clips lock onto the DDR2 DIMM (b). Note: The DDR2 DIMM sockets are slotted to ensure proper installation.
62 4 Upgrading your computer into the socket, turn the DDR2 DIMM around and try to insert it again. To reconfigure your computer Your computer automatically detects the amount of memory installed. Run the BIOS utility to view the new value for total system memory and make a note of it. Replacing the Veriton 3900Pro's hard disk Follow these steps to replace your computer’s hard disk: 1 Remove the computer cover (see page 55). 2 Detach all cables connected to the CD or DVD drive, the 3.
63 3 Lift the drive frame to a 90-degree angle; then pull out, and remove the drive frame.
64 4 Upgrading your computer 4 Pull out the drive rails that hold the hard disk to the housing. Set the drive rails aside. 5 Slide the hard disk frame to the left (d); then gently move it out (e) and pull it up to detach it (f). 6 Install the new hard disk into the housing. Secure it with the drive rails you removed earlier and connect the power and hard disk cables to the new hard disk. 7 Reinstall the drive frame into the housing. 8 Reattach the CD or DVD drive and the floppy drive cables.
65 Installing an expansion card To install an expansion card: Caution: Your system accepts low profile PCI cards only. 1 Remove the computer cover (see page 55). 2 Locate an empty PCI-E or PCI conventional slot on the mainboard. 3 Remove the bracket lock that holds the bracket to the computer. Save the bracket lock. 4 Pull out the bracket on the housing opposite the selected empty slot. 5 Remove the expansion card from its protective packaging.
66 4 Upgrading your computer Installing an expansion card To install an expansion card: 1 Remove the computer cover. 2 Locate an empty PCI Express or PCI slot on the mainboard. 3 Remove the bracket lock that holds the bracket to the computer. Save the lock. 4 Pull out the bracket on the housing opposite the selected empty slot. 5 Remove the expansion card from its protective packaging. 6 Align the card in the empty bracket and then insert it into the slot.
67 Replacing the Veriton 6900Pro/7900Pro's hard disk Follow these steps to replace your computer's hard disk: 1 Remove the side panel. 2 Detach the power and hard disk cables from the hard disk(a). Detach the hard disk from the drive frame (b). 3 Insert the new hard disk into the frame (a). Connect the power and hard disk cables to the new hard disk (b).
68 4 Upgrading your computer Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard. 4 Replace the side panel. See "To replace the side panel" on page 59. Installing an expansion card To install an expansion card: 1 Remove the side panel (see page 58). 2 Locate an empty PCI Express or PCI slot on the mainboard. 3 Remove the lock that holds the bracket to the computer.
5 System utilities
This chapter describes applications that are preinstalled on your computer.
71 Depending on the hardware and optional features installed in your computer, your system came bundled with several program utilities designed to streamline your computer's operations.
72 5 System utilities NTI CD&DVD-Maker (for models with CD or DVD Burner) The NTI CD&DVD-Maker is optical disk-recording software that allows you to create and copy audio, data and videos to recordable or rewritable optical disks. To copy an audio or data disk: 1 Click the Quick Burning icon 2 Insert the CD you would like to copy into the source drive and a blank disk into the target drive. on the desktop. 3 Choose the source and target drives from the pull-down lists.
73 4 Click the Start button to begin copying. For more information about NTI CD&DVD-Maker and its other features, refer to the NTl CD&DVD-Maker Help menu.
74 5 System utilities PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player that brings high-quality movies and karaoke to your multimedia PC. You can play back high-resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi-language and multi-subtitle selection, and parental control.
75 BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility. Note: Before you run BIOS, make sure that you have saved all open files. The computer reboots immediately after you exit Setup.
76 5 System utilities Recovering your system If your operating system files are lost or damaged, the recovery process will restore your system's original factory default settings or last system backup. Your Veriton series computer includes an OBR(One Button Recovery) button, a feature that makes restoring your system quick and easy. OBR works from a hidden partition on your hard drive that contains all the information required to restore your system. There are two modes to recovery your system.
77 You can also follow the steps below: 1 Locate the OBR button. 2 Press the button. You can change the password in Acer eRecovery.
78 5 System utilities a If you have not yet backed-up your system.
79 b 3 If you have previously backed-up your system. Select “Recover to Default Settings” to restore your system to the default factory settings. Select “Recover data from last backup” to restore your system to the last system backup.
80 5 System utilities 4 If you chose the recovery option, you should see the following screen. Click OK to continue. 5 After 15 seconds the system will reboot and initiate the restore operation.
81 6 After the recovery operation finishes the system will reboot. You will be required to go through the setup process again. Caution! Running the Recovery operation will erase all files previously saved in your computer so make sure to back up your important files before starting the recovery process. Note : This feature occupies 4GB in a hidden partition on your hard drive.
82 5 System utilities Using backup (Windows XP only) The Backup utility creates copies of information on your hard disk. In the event that the original data on your hard disk is erased or overwritten, or becomes inaccessible because of a hard disk malfunction, you can use the copy to restore your lost or damaged data. How do I back up files from my hard drive? To run the Backup utility: 1 Click the Start button in the taskbar.
83 Disk defragmenter (Windows XP only) The disk degfragmentation utility consolidates files and folders on your computer's hard disk. This allows your computer to access files and folders and save new data more efficiently. By consolidating your files and folders, the defragmenter also consolidates the volume's free space, making it less likely that new files will be fragmented. How do I defragment my hard drive? To run the Disk Defragmenter: 1 Click the Start button in the taskbar.
84 5 System utilities
6 Frequently asked questions
This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (www.acersupport.com) for assistance.
87 Frequently asked questions The following questions indicate possible situations that may arise during the use of your computer and each is followed by easy answers and solutions. I pressed the power switch but the system did not boot up. Check the LED located above the power switch. If the LED is not lit, no power is being applied to the system. Try the following: • Check if the voltage selector switch located on the rear panel of the computer is set to the correct voltage.
88 6 Frequently asked questions The printer does not work. Do the following: • Make sure the printer is connected to a power outlet and that it is turned on. • Make sure the printer cable is connected securely to the system's parallel or USB port and the corresponding port on the printer. See "Connecting your printer" on page 45 for more information. • For additional information concerning the printer, refer to the printer's documentation. No sound comes out from the computer.
Appendix A: Regulations and safety notices
90 Appendix A: Regulations and safety notices ENERGY STAR guidelines compliance As an ENERGY STAR partner, Acer Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
91 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
92 Appendix A: Regulations and safety notices Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem.
93 Notice for New Zealand 1 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
94 Appendix A: Regulations and safety notices Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
95 configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Below information is for products with such devices.
96 Appendix A: Regulations and safety notices 1 This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. 2 High power radar are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.
97 Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
98 Appendix A: Regulations and safety notices Declaration of Conformity for CE marking Name of manufacturer: Acer Inc. Address of manufacturer: 8F, 88, Sec. 1, Hsin Tai Wu Rd.
99 Index I internet/suspend key email 28 suspend 28 web browser 28 A accessing the online User’s Guide applications 71 17 B BIOS utility 75 C computer cover remove 57 replace 57 connecting options multimedia devices 47 audio line-in device 49 earphones/headphones 48 external speakers 47 microphone 47 network 45, 46 printer 45 serial mouse 46 USB devices 49 D disk drives CD-ROM/DVD-ROM/CD-RW drive inserting CDs/DVDs 32 taking care CDs/DVDs 35 hard disk 35 F features 21 connectivity 21 multimedia 21
100 Index NTI CD-Maker 72 PowerDVD 74 reinstalling programs 75 T turning off computer 44 software shutdown 44 suspend mode 44 turning on computer 44 power button 44 U upgrade add memory 60 install DDR DIMM 61 reconfigure computer 62 computer 60 install an expansion card 66 installation precautions post-installation 54 open computer 55 reinstall side panel 59 remove computer cover 55 replace top cover 56 replace components memory 60
