Installation Instructions

字体：Lato
Abode彩灯两只装说明书
105g无光铜
风琴折
审核
批准
曹佳丽
产品名
K
55*85mm
规格:
ACB-KSZP01 V1.0
物料编码:
UPC:
型号:ACB
2021.09.16
V1.0 首次创建
品牌
Pairing Process:
1
Remove the bulb from the
box and screw into the
desired socket.
2
ON
Switch the light on. It should
ready to connect.
3
Download the Abode app
and go to the Devices tab or
Settings menu to add a new
device.
must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR
deux conditions suivantes :
brouillage radioélectrique subi, même si le
fonctionnement.
ISEDC Radiation Exposure
Statement:
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
between the radiator and your body.
Cet équipement est conforme aux limites
pour un environnement non contrôlé. Cet
équipement doit être installé et fonctionner à
votre corps.
can be determined by turning the equipment off
CAN ICES-005(B)/NMB-005(B)
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment
and receiver.
(3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
technician for help.
FCC Radiation Exposure
Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
between the radiator and your body.
ISEDC RSS Warning:
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may
not cause harmful interference, and (2) this device
FCC Warning:
approved by the party responsible for compliance
equipment. This device complies with part 15 of
the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. This equipment has been
tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate
radio frequency energy and , if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which