Acepen AP906 100 AP906 Quick Start Guide Get 24/7 Customer Service & Extended Warranty Use Camera or QR Scanner to Scan Website:www.ace-pen.com E-mail:support2@ace-pen.com Or Visit: https://acepen.afterservice.
Overview Right Button Cloth Label Pen/Eraser Type-C Port K1 K2 K3 K4 K5 K6 K7 K8 Pilot Lamp 8 Buttons EN Working Area(9 x 5 inch) Notes: The shortcut key function can be customized, which needs to be set in the driver. (You need to install the driver by yourself if needed.) The P02 pen can be stored in the cloth label. Connect the mobile phone to switch shortcut keys. (You can select the shortcut keys from K1 to K8.) System Requirements Windows 7 or above Mac OSX 10.11 or above Android 6.
Product and Accessories Graphic Tablet Installation 1 Connect the Type-C end to the connecting port on your AP906. 2 Connect the USB end of the USB cable to your computer interface. EN EN 1 2 3 AP906 P02 Pen USB Cable 4 5 6 Replacement Nibs x 8 Nib Clip Gloves 1 Connect the Type-C end to the connecting port on your AP906. 2 Connect the USB end of the USB cable to the OTG adapter and then connect it to the Android phone or tablet.
Driver Installation Driver Function Introduction ！ Before Installation 1 Before installation, if there are drivers of similar digital products, please uninstall them firstly, including drivers of older versions of Acepen. 2 Before installation, please shut down all painting-designed software and anti-virus software. Avoiding unnecessary errors during the installation process.
Driver Function Introduction Driver Function Introduction of the figure. The more you select the value in the right corner of the chart, the less sensitive the pen will be, which means you may need to put more strength when using the pen. As for the chart of Pressure Test, you can use it to test for the pressure and select the value as you like. EN EN Note: Click “Function”, the above figure will be displayed. You can use the shortcut keys on the keyboard to control the keys K1 to K8 on the product.
Precautions Do not place the digital tablet and pressure sensitive pen close to magnetic fields, so as not to interfere with the use of the product. Do not place the tablet and pen on an unstable place to prevent it from falling from a height and being damaged. EN Do not place the tablet and pen close to water sources, such as bathtubs, washbasins, kitchen sinks, washing machines, wet basements or poolsides, etc., to prevent liquids from splashing on the tablet and pen.
Uninstall the Driver Service Support If you have any problems, please contact us via our website: www.ace-pen.com or email address: support2@ace-pen.com Windows Click “ Start ” > “ Control Panel ” > “ Programs ” > “ PenTablet ” > Follow the uninstalling steps until the program is uninstalled. Note: Find the following file, if it exists, delete it: EN C:\Windows\System32\Wintab32.dll C:\Windows\SysWOW64\Wintab32.
