Content 1 2 3 General Information ............................................................................................................................. 3 1.1 Profile ................................................................................................................................................ 3 1.2 Safety Information............................................................................................................................. 3 1.
4 5 6 Input method....................................................................................................................................... 17 4.1 Icons for Input Methods .................................................................................................................. 17 4.2 The use of Input Methods ............................................................................................................... 17 Using the Menus...........................................
1 General Information 1.1 Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
while driving. In some countries, dialing or receiving calls while driving is illegal! Ø SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. Ø SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only approved accessories and batteries. Ø USE SENSIBLY Use only in a normal and proper manner. Ø EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems.
of electronic circuits and damage the battery and some plastic parts. Ø Do not store the mobile phone in a chilly place. Otherwise, moistures will be formed inside the mobile phone to damage electronic circuits when the mobile phone is moved to a constant temperature place. Ø Do not throw, knock or shock the mobile phone, as that will destroy the internal circuits and high-precision components of the mobile phone. 2 Your phone 2.
-7-
2.2 u u u u u u u u Functions of Keys The mobile phone provides the following keys: Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records. End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state; or hold it for two or three seconds to power on or off the mobile phone.
Press and hold the # key to lock the screen. 2.3 Technical specifications Phone Dimensions (111.7*45.5*14.4mm): Weight: 42.8g（with battery） Lithium battery: BL-4C Rated capacity: 600mAh Continuous standby duration: 200h Continuous conversation duration: 2-3h (Relates to network status) Please refer to their labels for other data related to the battery and the charger. 3 Getting started 3.
data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card. Exercise caution when operating an SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach. Installation u Hold the End key for a while to power off the mobile phone u Push the back cover above the battery and remove it. u Pull the middle battery buckle outward and then lift the battery away.
The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card.
3.2 Installing T-Flash Card The T-Flash card is a pluggable mobile storage card inside the mobile phone. To install the T-Flash card, place its indented side downward, and then insert the card into the card slot. To remove the T-flash card, take the card out. Note: The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow it! 3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked.
Using a travel adapter: u Install the battery into the mobile phone before charging the battery. u Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. u Insert the plug of the travel charger to an appropriate power outlet. u During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. u It is normal of the battery to become hot during the charging period.
u Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging. u Power off the mobile phone before removing the battery. u The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer time. In this case, the battery icon does not flicker until a long time after the battery enters the charge status.
3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 1122. Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface.
then press the Dial key to dial a call. To end the call, press the End key. u Answering incoming calls Press the Dial key or the Left soft key to answer an incoming call. Press the End key to end the current conversation. To reject an incoming call, press the End key or the Right soft key. Note: If the caller can be identified, the mobile phone will present the calling number. If the calling number exists in the phonebook, the mobile phone will present both the name and the phone number of the caller.
4 Input method This mobile phone provides multiple input methods, including English input, and numeric input method. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.1 Icons for Input Methods After you enter an edit window such as a window for editing the phonebook or short messages, an icon is displayed to indicate the current input method: Numeric input:“Numeric” English input:“ABC”、“abc” Espanol input：“ES”、“es” 4.
5 Using the Menus . 5.1 Call center Call history u Missed calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select View to enter the missed calls list. Navigate to a missed call and then press the Dial key to dial the number that originated that call. u Dialled calls You can view the latest dialed calls. Choose dialed calls and then select a dialed call to call, send a text message, save or delete.
numbers in the call history, or delete only the numbers in the missed calls list, the dialed calls list or the received calls list. 5.2 Messages If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. If the destination user has received the short message you sent and the short message delivery report function is activated, the phone will give off a message report alert tone.
Sent messages Sent messages are listed in this menu. Broadcast messages Look up the broadcast messages. SMS settings This function enables you to set the default features about the text message. 5.3 Multimedia Camera Use this function to capture pictures.
Image viewer Pictures taken by camera can be scanned through this function. Video recorder This function enables you to record dynamic pictures. In the capture interface, press up or down direction key to zoom in and zoom out; OK key to capture videos clip. Video player Use this function to play video files. By pressing the direction key can you control the playing process of video player: play/pause（OK key）, fast forward (press and hold right direction key) and rewind (press and hold left direction key).
After accessing the sound recorder, you can press left soft key to perform the following operations: u New record: select this function to record a new file. u List: recorded files are listed in this menu. u Settings: Through this function, you can set audio quality for record files. FM radio You can use the application as a traditional FM radio with automatic tuning and saved channels.
You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. u Details For details, you can see the name, total size and free size. Profiles The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments.
u Reset Use this function to restore factory settings of user profile. Shortcuts You can set some most used menus as shortcut functions through this item. Phone settings u u u u u Time and date: set the home city, the date /time format, and detail time of the location. Language: Select the display language for the mobile phone. Pref. input method: Select an input method as preferred method. Display: Users can access this item to set wallpaper, screen auto lock, show date and time.
conversation. u Call divert: this network function enables you to forward incoming calls to another number you have previously specified. u Call barring: The call barring function enables you to bar calls as needed. When setting this function, you need to use a network barring code, which can be obtained from the network operator. If the code is wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to select Activate or Deactivate.
Network settings Contact the network operator to obtain the following network services: u Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended. When Network selection mode is set to Automatic, the mobile phone will prefer the network where the SIM card is registered. When Network selection mode is set to Manual, you need to select the network operator's network where the SIM card is registered. u GPRS connection: Set GPRS connection to When needed or Always.
off the phone. Password is required when the phone is locked. The password is 4 to 8 digits. Ø Change password: to change phone password. The initial password is 1122. Connectivity u Bluetooth With Bluetooth, you can make a wireless connection to other compatible devices, such as mobile phones, computers, headsets and car kits. You can use the Bluetooth to send images, video clips, music, sound clips and notes, etc. Restore settings Use this function to restore factory settings.
u Edit: Edit the telephone number and name. u Delete: Delete the telephone number from the phonebook. u Copy: Duplicate the telephone number from the mobile phone to the SIM card or from the SIM card to the mobile phone. u Phonebook setting: To set related parameters of phonebook. 5.6 Fun This function enables you to enjoy Snake. 5.7 Organizer Calendar Once you enter this menu, there is a monthly-view calendar for you to refer to. Alarm Five alarm clocks are set but deactivated by default.
Note: This calculator provides limited precision and is only applicable to simple arithmetic calculation. 5.8 Movistar STK service is the tool kit of SIM card. This phone supports the service function .The specific items are depended by SIM card and network. Service menu will be auto added to the phone menu when supported by network and SIM card. 5.9 Services Internet service This function enables you to view the internet. Your phone will ask you with existed way.
6 Appendix Appendix 1：Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Caus Fault Solution e The SIM card is Contact your network service provider damaged. The SIM SIM card card is not in Check the SIM card error position. The metal face of the Clean the SIM card with a clean cloth SIM card is polluted.
Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building Poor received or in a signal quality basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The battery cannot be charged The mobile phone is not in a service area of the GSM network The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone -33-
Poor contact Ensure the charger plug is in good contact with the mobile phone -34-
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Mobile (FCC ID: JJMMIQROS) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the head is 1.073W/kg and when properly worn on the body is 1.192W/kg.This device was tested for typical body-worn operations with the back of the handset kept 15mm from the body.
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
