Daim Ntawv Qhia Tus Neeg Siv
Quick Start Guide
XID Mixed Flow Square Duct Adapter
Square Duct Adapter Quick Start Guide
• Square duct adapters are shipped separate from
the fan and are mounted in the eld
• This Quick Start Guide does not replace the
Installation Operation Manual (IOM), refer to the
IOM for more information
Parts and Tools List
Parts List
• (1) Fan
• Square duct mounting collar anges
(4) Sizes 7-16
(8) Sizes 18-33
• (2) Hardware kit
• (1) Isolator kit (optional)
Tool List
• Impact
• 1/2 inch socket
• Torque wrench
Step 1
Mount Square Duct Adapter to Fan
• Square duct adapter will come in 2 piece or 4
piece designs per inlet/outlet depending on unit
size (see below)
SIZE 7-16 (QTY 2)
SIZE 18-33 (QTY 4)
• SQ-7 to SQ-16 will consist of 2 pieces per
inlet/outlet
• SQ-18 to SQ-33 will consist of 4 pieces per
inlet/outlet
• Mount square duct adapter to inlet and/or outlet
using appropriate number of ange pieces and
5/16 inch semi-gimlet fasteners provided in
hardware kit (no nuts required)
• Repeat previous step for outlet of fan
• Tighten to 132 in·lbs (11 ft·lbs) as specied in
the IOM with 1/2 inch socket DO NOT
OVER-TIGHTEN
Step 2
Install Fan Assembly in Duct Work
3 WHEEL DIAMETERS 3 WHEEL DIAMETERS
FLEXIBLE DUCT
(BY OTHERS)
• Install fan assembly in proper orientation per
application (use appropriate isolators)
• Mount fan and lter section to ductwork using
fasteners supplied by others
• Fan can be mounted in horizontal or vertical
applications
• Flexible duct connectors are recommended for
mounting to the inlet and outlet of the fan
• Install fan with approximately three wheel
diameters of straight duct before and after
the fan
NOTE: Filtration information on reverse side
486124 • Square Duct Adapter and Filtration, Rev. 1, March 2023 • Copyright © 2023 Accurex, LLC