User's Manual

Mini-Size, up to 300Mbps

IEEE 802.11b/g/n, 2T2R

• Comply with IEEE 802.11b/g/n standards.

• High transfer data rate – up to 300Mbps.

• Supports WMM wireless QoS feature.

• Supports 64/128-bit WEP, WPA, WPA2 with IEEE 802.1x functions for high level of

security.

• Support the most popular operating system: Windows XP/Vista/7.

• Supports WPS (WiFi Protected Setup) hardware button for easy connection.

• Supports software AP function.

• Supports USB 2.0/1.1 interface.

• Portable and mini size design.

• Green power saving.

Specification

Product 300N Wireless LAN USB Module

Main Chip Realtek RTL8192CU

Standard IEEE 802.11b/g/n

Bus Type USB 2.0 Type A

Frequency Band 2.4000~2.4835GHz (Industrial Scientific Medical Band)

Data Rate 11b: 1/2/5.5/11Mbps

11g: 6/9/12/24/36/48/54Mbps

11n (20MHz): MCS0-15, up to 144Mbps

11n (40MHz): MCS0-15, up to 300Mbps

Output Power

11n: 21dBm±1.5dBm

11g: 19dBm±1.5dBm

11b: 14.5dBm±1.5dBm

Security WEP 64/128, WPA, WPA2, IEEE 802.1x

Antenna Chip Antenna x 2 (2T2R)

Drivers Windows XP/Vista/7

LED Link/Activity

Dimension 9.5(H) x 19.2(W) x 56(D) mm

Temperature

Operating: 32~104°F (0~40°C) , Storage: -4~140°F (-20~60°C)

Humidity Operating: 10~90% (Non-Condensing)

Storage: Max. 95% (Non-Condensing)

Certification 47 CFR FCC Part 15 Subpart B, Class B

47 CFR FCC Part 15 Subpart C & 15.247

Canada Standard ICES-003 Issue 5, Class B

IC RSS-210 Annex 8

Feature

EW-7822GMn

300N Wireless LAN USB Module

PAGE 1
EW-7822GMn 300N Wireless LAN USB Module Mini-Size, up to 300Mbps IEEE 802.11b/g/n, 2T2R Feature • Comply with IEEE 802.11b/g/n standards. • High transfer data rate – up to 300Mbps. • Supports WMM wireless QoS feature. • Supports 64/128-bit WEP, WPA, WPA2 with IEEE 802.1x functions for high level of security. • Support the most popular operating system: Windows XP/Vista/7. • Supports WPS (WiFi Protected Setup) hardware button for easy connection. • Supports software AP function. • Supports USB 2.0/1.
PAGE 2
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.