Product Name : Product Specification for EN1207B-TX 4 Version : 1998/4/4 Model Number: EN1207B-TX4 1.
The Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Cronin Table of Contents Change History 1. Product Description 2. Features. 3. Hardware Specification.. 3.1 PC System. 3.2 Configuration 3.3 Network Conform 3.4 Power Characters 3.5 Environment... . 16 Magic Packet Connect... 3.7 LED indicator. FE 3.8 Block 4. Software Specification. 4.1 Network Device Drivers Support 4.2 Network Operating Systems Support... 4.3 Magic Packet Product Content. $.1 Packaging Specification. 6. Certification Requirements... 6.1 Network Operation System “Certification. . as .
Acton 1. Product Description 0. Introduction ENI207-TX 4 is 32-bit PIC-BUS Fast Ethernet Adapter, media support 100BASE-TX & 10 BASE-T. It is a Fast Ethernet Adapter with High Performance, High Reliability, Low Chip Count, and Low Power Consumption. .
cc Tron 2. Features Specifications: Standard Conformance Host Interface Ethernet Data Rate Media Connection VO address Interrupt LED Driver support Temperature Humidity EMI Regulation IEEE802.3u 100BASE-TX & IEEE802.3 ABASE-T : PCI Bus compliant to PCI spec. 2.1 10 and 100 Bps { Auto-negotiation) Single R145 for 100 BASE-TX & 10 BASE-T Auto selection : Automatically decided by PCI BIOS Three LED for Link, 100M, Activity : Wetware ODIOUS Driver Nov ell Net Ware 4.1 4.11 DIS 2.
Tectonic 2.2 Features + 10/100 Bps dual speed Auto negotiation * Support WOL (WAKE-ON-LAN) « Support AC PI (Advance Configuration Power Interface) . Meets PCI Local BUS Specification Rev. 2.1. + Support Power Manager Function + Automatic VO Address and IRQ setup * Single JR-45 connector for 10/100 Bps operation . Provides full-duplex Ethernet operation for both ABASE-T and 100BASE-TX . 32 Bit data transfer with bus master for PCH interface .
Cronin 3. Hardware Specification 3.1 PC System or Nox] a. Bus PCI Bus Spec. Rev [2.1] v b. Data Transfer Bus Master v e CPU W286 WM v 586 d. System Bus Clock [ 25w33 MHz v e. PCI Signal Define UP UP PRESENT# BEND [PULL-UP PR§NT2¢ DEIGN [Pullman Monday Opulent Configuration Yes(~] or Noon] 4 RAM Size T TKB b RAM Address [ to H c.Lanl’O address Auto Configure By BIOS [ 1 Selections v d interrupt Auto Configure By BIOS v ROM Size [16,32,64,128 KB v FROM Address [Selections v 2.
Acton a. Temperature { 0 to 855]°C Operating b. Humidity Operating 3.6 Magic packet connector a. Pin Assignment Pin 1: auxiliary power $V Pin 2: auxiliary ground Pin 3 : wake on pin » piney pr PIN 2 PIN 1 3.
Acton 3.
4.2 Network Operating Systems Support (For reference only) Tectonic Network Operating System/Protocol Driver Support Net Ware 4.1 & 4.11 DOS/052 ODI, 32-bit ODL MSL Microsoft Windows 95/98/NT NDIS3/4/5 IBM LAN Server 2x3.x, 4.x NDIS2/082 IBM TCP/IP for DOS and 08/2 NDIS2/082 SCO Unix LIMPID Driver 4.3 Magic Packet format 122001 Destination Address or broad.
Acct on S. Product Content 1 Product Content PCB Yes| | or Nox] 7 T-Connector Manual v Diskette * 1 (1.44MR) Power Adapter Module Media Module or Cable (for PCMCIA}Y Warranty Card v Shim Red Box 5.1 Packaging Specification The detailed packaging specification is shown as below. PCB or No|x] a Layers Relaters, Ol 6-layers, LJ 2-layers v b_ Dimensions 122911) x 101. 60(W) [mm] 4.839 (L)x 4 (W) [inch] ¢. Cannelloni to media MI r-a5, TTBNC, v d Connector ta host Bobbi PCI Bus [IPCMCTA-68 ju] . e.
/Akron 5 Diskette a Type M35 TT [Miami] x [10% v bh. Drivers & Utility IT step [J Install. bat ™ Release.doc 1 Directory for [J Evisceration LJ Boot ROM v HM Wetware FI DIS DOS/082 EB] Packet Driver ENT BA Windows 95/98 BM Unix [J pens oo 6 Power Adapter Module No [X] a Dimensions wx (W)x je) b. Separate Power Cable Jacob, spc <. Certification OU, Orc, 7 Media Module a Type Tp, TT v 8 Warranty Card Yes 9 Labels a.
/croon 6 Certification Requirements 6.1 Network Operation System Certification The list shows the requirements of certification for network operation system compatibility, Network Software Stems Yes|¥] or Nol] a. Nov ell Hardware Drivers BH ODI v b.
6.2 Hardware Certification The list shows the requirements for hardware certification. Acct on elms | | Yes] or No ix} A. EMC 1. EMI a FCC Part 15 M Class B |, [Class A 2. EMS:a. Radiation Susceptibility b. Conduction Susceptibility ¢. Lighting Surge Data Line (IEC 801.5): 2KV Power Line (IEEE 587) : 1.5KV d. Transient (IEC 801.4): IKV e ESD (JEC 801.