CineView HE User Manual
In the Box Antenna x 9
Quad 5 3
2.4GHz+5GHz Dual-Band Transmission Technology Latency Less Than 0.06s Long-Distance Transmission of 1200 ft/350m HDMI In and Loop-out, USB Video Class (UVC) Out 1 Transmitter for 4 Devices, Pick & Mix No Fan Design Power by DC Input, NP-F Battery & USB-C Wireless Remote Monitoring App Accsoon Go Automatic Channel Selection Easy Group Pair FHD Video and High-Quality Audio Transmission Aerospace-Grade Aluminum Alloy 1.
CineView HE 13 HDMI In HDMI Out 1.
CineView HE 13 HDMI Out UVC Out 1.
Application HDMI Transmitter 1 2 3 Receiver Receiver Receiver Receiver Receiver Receiver Receiver Receiver Android/iOS (APP) Receiver Android/iOS (APP) Android/iOS (APP) 4 Receiver Android/iOS (APP) Android/iOS (APP) Android/iOS (APP) Note: These are four different mix and match combinations for you to choose from.
Instruction How to Install 1. Install the antennas as shown in the picture. 2. Use the cold shoe mount adapter to install the CineView HE onto the camera or camera cage. 3. Use an NP-F970/F750/F550 battery, DC source or USB-C to power the CineView HE. 4. Connect camera HDMI to CineView HE. 2 Power On/Off Power On: Click the power on/off button Power Off: Hold the power on/off button for 2 seconds. 3 Group Setting 1. CineView HE has a group setting knob on each transmitter and receiver.
Instruction 4 OLED Display Current group Input audio information Input video information Battery level/DC input Connection status Current Channel Connection Status: Transmitter: the number of connected devices; “0" if none connected. Receiver: “1" when connected to the transmitter; otherwise “0". 5 Data Rate Setting How to: Press the menu button to access “Data Rate Setting" → Press the left and right buttons to select → Press the menu button to activate the setting. 6 Channel Setting 1.
Instruction 7 Network Reset 1. Only the transmitter has the “Network Reset” menu. 2. Users can reset the WiFi SSID and password to factory settings by “Network Reset” menu. How to: Press the menu button to enter “Network Reset” → Select “Yes” → Press the menu button to confirm → Select “Yes” → Press the menu button to reboot, the SSID and password of the 5G WiFi will be reset to factory settings. 8 App Monitoring 1.
Instruction 3. Monitoring Once successfully connected, open the Accsoon Go App, select “CineView" and tap the “Monitor" button. CineView CineView Note: If you have any questions about using Accsoon Go App, please refer to Accsoon Go App tutorial videos on Accsoon's official YouTube channel. 9 Livestream Setting There are two ways of using CineView HE for live streaming. 1. Livestream via UVC out ①Only the CineView HE’s receiver has the UVC out.
Instruction 2. Livestream via Accsoon Go ① Change CineView HE transmitter’s setting to speed mode Press the menu button to access “Data Rate Setting”→ Use the right button to change to “speed mode” → Press the menu button to activate the setting. ② Move to Accsoon Go Open Accsoon Go and tap the “live” → Enter streaming RTMP URL and code → Tap “Go Live”. Note: Please refer to the official website where you want to do live streaming for instructions on how to obtain your live streaming URL and code.
Instruction Note: Before searching for the latest firmware, please confirm that your mobile device’s WiFi can access the Internet so that the App can search for the latest firmware from the server. 2. Update Once the new firmware has been downloaded, connect your mobile devices to the CineView HE → Tap “Next” on Accsoon Go App to update. Note: 1. Make sure the battery level of CineView HE is above 50% before updating. 2. No power cuts should occur during the upgrade process. 3.
Specification HDMI HDMI HDMI Loop-out HDMI 1080p 23.98/24/25/ 29.97/30/50/59.94/ 60fps HDMI Output Format 1080p 23.98/24/25/ 29.97/30/50/59.94/ 60fps 1080p 24/25/ 30/50/60fps 5.5mmx2.1mm center positive DC Port DC Voltage 7.4~16.8V 44.1KHz/48KHz 16bit/24bit PCM Audio Latency <0.06s(Camera latency not included) OLED Display 1.3 inch Transmission Power 17~20dBm Transmission Range Power Consumption 1200ft (No obstacles, no interference) 4.
Warranty 1. If there is a quality problem that occurs within 15 days after receiving the product, Accsoon will provide complimentary maintenance or replacement. 2. Under proper use and maintenance, from the date of receipt, Accsoon will provide a one-year warranty on the wireless video transmission system and a three-month warranty on the accessories and cables. Free maintenance service is available during the warranty period. 3. Please keep the proof of purchase and the user manual in a safe place. 1.
1. Please make sure the transmitter and receiver are set to the same group. 2. Please check that the antennas are securely mounted. 1. Please check whether the HDMI cable of the camera is correctly plugged into the HDMI IN port of the transmitter. 2. Please check if the video format and other information are shown on the display interface; if not, please check the HDMI cable and see if the HDMI of the camera has a video output. 3.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Contact Us Accsoon Official User Group Support@accsoon.