• Atari VCS Video Computer System Manual • • • • Atari VCS Video Computer System Power supply Power cord HDMI cable Atari VCS bundles may also include an Atari Wireless Modern Controller and/or an Atari Wireless Classic Joystick. You may also use third-party controllers that are Xbox or PC compatible, as well as a keyboard and mouse. In order to set-up the Atari VCS for the first time we recommend using a compatible controller.
Place your Atari VCS on a flat, stable surface that is well-ventilated, relatively cool, and away from direct heat sources. Don't put other objects on top of the Atari VCS. Do not place the Atari VCS on top of something that generates heat. And avoid putting anything directly behind the vents at the back corners of the Atari VCS. The Atari VCS is designed to be displayed openly and device performance will also benefit from placement in a wellventilated location.
The Atari VCS requires an Internet connection. You can connect your Atari VCS to your wireless router or modem. If you want to connect wirelessly, skip this step. You will be prompted to connect to a wireless network later. For a wired connection, use an Ethernet cable to connect your router or modem to the ethernet port in the back of the Atari VCS. The ethernet port is labeled. The Atari VCS requires power to operate. To connect the Atari VCS to power: 1. Plug the power cord into the power supply. 2.
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
• Bluetooth wireless • Rechargable • PC/Mobile compatible • Rumble
1. Connect your Atari VCS Wireless Classic Joystick to the Atari VCS using the USB Play/Charge cable. 2. Power on your Atari VCS. 3. When the Atari VCS recognizes the joystick, it will display a message on the screen. 1. Power on your Atari VCS. 2. Wait for the Atari logo animation to finish playing. 3. You will see a flashing blue icon on the screen to indicate that the VCS is seeking a connection. 4.
message at the top of the Atari VCS screen indicating the joystick is connected. The battery will need to be recharged occasionally by plugging into the USB. 1. The Atari Fuji logo button in the top right of the controller: ◦ Flashing quickly on and off = attempting to pair via Bluetooth ◦ Flashing slowly on and off = attempting to reconnect via Bluetooth ◦ Steady glow = powered on 2. The ring of LED lights around the joystick will glow when the controller is powered on.
Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or eye strain: • Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don’t think you need it. Parents should monitor their children for appropriate play.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
1. Connect your Atari VCS Wireless Modern Controller to the Atari VCS using the USB Play/Charge cable. 2. Power on your Atari VCS. 3. When the Atari VCS recognizes the controller, it will display a message on the screen. 1. Power on your Atari VCS. 2. Wait for the Atari logo animation to finish playing. 3. You will see a flashing blue icon on the screen to indicate that the VCS is seeking a connection. 4.
The Atari VCS Wireless Modern Controller is designed to work with the Atari VCS, but is also compatible with most PCs, mobile devices and Xbox consoles. The Atari VCS Modern Controller can also emulate an Xbox One controller. To enter Xbox Mode press and hold the BACK and CONTEXT MENU buttons simultaneously for five seconds. The Atari Fuji logo button will flash on and off until the controller has entered Xbox Mode.
5. Press the left trigger all the way down three times. PRess the right trigger all the way down three times. 6. Press both the "D-PAD Down" and "Y" button at the same time to save and exit the calibrate mode. Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or eye strain: • Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don’t think you need it.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2.
