TRK2XX Initiation Manual TRK2XX Initiation Manual NB-IOT / LTE-M / EGPRS Low Power Tracker Rev. TRK2XX V0.
TRK2XX Initiation Manual For any assistance please contact: Email: info@accent-systems.com For more information or technical support please visit: https://accent-systems.com/support/ COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF ACCENT SYSTEMS, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES.
TRK2XX Initiation Manual 6
TRK2XX Initiation Manual 1. Summary COPYRIGHT................................................................................................................................. 5 HISTORY...................................................................................................................................... 5 1. Summary.................................................................................................................................7 2. Steps to initiate the device..................
TRK2XX Initiation Manual 2. Steps to initiate the device 1. Get a Micro SIM Card (3FF). · Needed information (from your operator): - MCC and MNC. - IoT-NB band ; GSM band ; LTE-M band. - APN configuration (APN user, password, APN context type, APN authentication method. 2. Insert the SIM Card. Shown in point 6, page 9. Opening and closing of the device shown in point 5, page 8. 3. Download Inmolecular TRK APP. Shown in point 12, page 14 4. Set the connection settings. Shown in point 12, page 14 5.
TRK2XX Initiation Manual 3. Introduction TRK2XX series are a family of low power tracker devices conceived to have very long battery life without recharging or replacing the batteries. This document is a guide to set up and maintain TRK2XX devices. TRK2XX family is composed of 2 models, TRK210 and TRK230. TRK210 is a non rechargeable and provides an outstanding long battery life.
TRK2XX Initiation Manual 5. How TRK210 and TRK230 work TRK210 and TRK230 devices are a low power devices that wake up every a fixed interval to perform a GPS location/WiFi location. WiFi location is operated in client mode, scanning nearby Wi-Fi network to have the location information as a sniffer.
TRK2XX Initiation Manual 1.5mm HEX key Figure 1 - TRK back cover bolts position. The steps to reinstall the back cover are: 1. Check the back cover position against the top part of the TRK device. See Figure 2 for more details of correct alignment. 2. Before to close check that the o-ring seal is in the correct position. The o-ring have to be placed all over the TRK top part edge. 3. Place the back cover over top part and screw the 4 HEX screws. 8.
TRK2XX Initiation Manual 3. Insert a Micro SIM (3FF) in the SIM card holder. 4. Close SIM card holder as is shown in the figure 3. 5. Reinstall the back cover as is explained in the section 3 of this document. Slide metallic SIM card holder hinge (market with blue arrow) to the direction of orange arrow. Insert the SIM card into the guides of the hinge. Close the hinge making pressure over it in as is indicated by the blue arrow and sliding in the direction of orange arrow.
TRK2XX Initiation Manual 2. Ensure to use Saft LS14500 or compatible 3.6 V Primary lithium-thionyl chloride battery. If any doubt please contact Accent Systems. 3. Use the same batch batteries, do not mixed used batteries with new ones. 4. Insert the batteries in the correct position as is shown in figure 4. Figure 4 - TRK210 battery compartment with the batteries in the right position. Blue arrows mark positive pole and orange arrows mark negative pole. 10.
TRK2XX Initiation Manual RGB LED window Micro USB connector Figure 5 - TRK230 recharging BATTERIES SAFETY WARNINGS • Caution: Risk of explosion if the battery is replaced by an incorrect type (for TRK210) • Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, puncture, or shred.
TRK2XX Initiation Manual A battery subject to extremely low air pressure (low air pressure at high altitude) that may result in a explosion or the leakage of flammable liquid or gas WARNING: Never attempt to open the battery for any reason. If battery case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery. 11.Human interfaces The TRK2XX devices have three different elements to interact with the user.
TRK2XX Initiation Manual Blink green: sharing keys in process. 12. Autotest and key provisioning Autotest and key provisioning is a process that is only carried the first time that TRK starts in order to check all the peripherals and exchanges the secret keys with Inmolecular platform. This feature is only present on the firmware version TRK V1.2019-04-9.0 and the following ones. Fore more info contact Accent Systems. 13.
TRK2XX Initiation Manual 6. Click Over the device that you want to connect. 7. A connection process starts and finish when appears the following screen 8. Scroll down “Sending types:” label. Here is the starting point of communications configuration.
TRK2XX Initiation Manual The parameters to set are the following ones: Sending types: used to set the between all the possible technologies that the TRK2XX has: NB-IOT, LTE-M and GPRS or a combination of them. MCC and MNC: this values are provided by the operator. In the next firmware versions it will be possible to set it to automatic. NBIOT IP: is the IP address of Inmolecular platform, have to be 35.195.70.
TRK2XX Initiation Manual 17.FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCCID: 2ABTTTRK230 FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
TRK2XX Initiation Manual The device contains FCC IDs: XMR201707BG96 & 2AC7Z-ESPWROOM02 This device has NOT to be used to track people, do NOT attach it on human body. Device duty cycle The device minimum interval between two events of cellular data transmission is 8 minutes, the maximum interval is 1440 minutes, this boundaries can not be overridden by customer because the device’s firmware controls these limits.
TRK2XX Initiation Manual 18.CE-RED statements There are no restrictions of use. Frequency bands and maximum transmitted power LTE Frequency Max LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18 /B19/B20/B26/B28 23dBm±2dB LTE-TDD B39 23dBm±2dB GSM850/GSM900 33dBm±2dB DCS1800/PCS1900 30dBm±2dB GSM850/GSM900 (8-PSK) 27dBm±3dB DCS1800/PCS1900 (8-PSK) 26dBm±3dB Bluetooth PWR = up to 4 ± 1 dBm WiFi 802.11b +20.5dBm±1dB 802.11g +16.5dBm±1dB 802.11n +13.
TRK2XX Initiation Manual Accent Systems www.accent-systems.