Semi-Rugged Tablet PC S10A User Manual Ver 1.
S10A User Manual Table of Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i CE Conf ormit y St at ement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i FCC Compliance St at ement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Copyright St at ement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S10A User Manual Inst alling a Scanner (opt ional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Upgrading Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Removing t he Replacing t he Removing t he Replacing t he Removing t he Replacing t he Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S10A User Manual Checking Bat t ery St at us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Opt ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maint enance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maint aining t he Bat t ery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S10A User Manual Preface CE Conformity Statement Radio product s wit h t he CE alert marking comply wit h t he R&TTE Direct ive (1999/ 5/ EC) issued by t he Commission of t he European Communit y. Compliance wit h t his direct ive implies conf ormit y t o t he f ollowing European Norms (in bracket s are t he equivalent int ernat ional st andards).
S10A User Manual FCC Compliance Statement This device complies wit h part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo condit ions: 1. This device may not cause harmf ul int erf erence; 2. This device must accept any int erf erence received, including int erf erence t hat may cause undesired operat ion. CAUTION! The maximum SAR value report ed is 0.
S10A User Manual int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f and on, t he user is encouraged t o t ry t o correct t he int erf erence by one or more of t he f ollowing measures: • Reorient or relocat e t he receiving ant enna • Increase t he separat ion bet ween t he equipment and receiver • Connect t he equipment int o an out let on a circuit dif f erent f rom t hat t o which t he receiver is connect ed • Consult t he dealer or an experienced
S10A User Manual Safety Instructions Use t he f ollowing saf et y guidelines t o help prot ect yourself and S10A. • Do not at t empt t o service t he S10A yourself . Always f ollow inst allat ion inst ruct ions closely. • Be sure t hat not hing rest s on t he AC adapt er's power cable and t hat t he cable is not locat ed where it can be t ripped over or st epped on.
S10A User Manual Battery Safety RTC Battery Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Do not place t he bat t ery incorrect ly as t his may cause danger of explosion. • Dispose of used bat t eries according t o t he manuf act urer's inst ruct ions. • Do not dispose of bat t eries in a f ire. They may explode. Check wit h local aut horit ies f or disposal inst ruct ions.
S10A User Manual Storage and Safety Notice Alt hough charge Lit hium-Ion bat t eries may be lef t unused f or several mont hs, t heir capacit y may be deplet ed due t o t he build up of int ernal resist ance. If t his happens t hey will require recharging prior t o use. Lit hium-Ion bat t eries may be st ored at t emperat ures bet ween -20° C t o 50° C, however t hey may be deplet ed more rapidly at t he high end of t his range.
S10A User Manual Rugged and Ready to Go Congrat ulat ions on your purchase of t he S10A Semi-Rugged Tablet PC. This product combines rugged design wit h reliable perf ormance and powerf ul f unct ionalit y t o best suit all your needs, in a wide range of working condit ions. This user manual out lines all you need t o know t o set up and use your S10A. If you have any f urt her quest ions or queries, cont act our t echnical support t eam via our websit e: www. aca-digital. com.
S10A User Manual Package Contents Ensure all t he f ollowing it ems are present when you receive your S10A. If any of t hese it ems are missing, cont act your vendor immediat ely. Note • • • • • • Screens used in t his manual are f or illust rat ive purposes only. Act ual screens may vary depending on your product version.
S10A User Manual Exploring the S10A Front View 1 2 3 5 4 S1 S2 7 6 7 8 F1 9 No. F2 10 F3 MODE ENTER 11 12 13 14 9 Component 1 Power LED • Of f : Power of f • Solid green: Power on / When in power of f mode, light s green when charging. • Blinking green: AC power on and t he bat t ery is charging 2 HDD LED • Light s green t o indicat e hard disk drive act ivit y.
S10A User Manual 4 No. Component 5 S1 / Bright ness but t on • Funct ions as a barcode swit ch key when a barcode scanner is connect ed, ot herwise, can be assigned as a f unct ion key (F4). • When mode is enabled, press t o decrease bright ness. 6 S2 / Bright ness but t on • Can be assigned as a f unct ion key (F5). • When mode is enabeld, press t o increase bright ness.
S10A User Manual Rear View 2 1 3 4 5 Lock Lock 5 6 No.
Right View 1 2 3 No. 4 Component 1 Microphone j ack 2 Headphone j ack 3 VGA port 4 Serial port Left View 1 No.
S10A User Manual Bottom View 1 No.
S10A User Manual Getting Started Installing the Rubber Bumpers To prot ect t he housing case of S10A, inst all t he rubber bumpers. 1. Inst all t he rubber bumpers on t he lef t and right side of S10A. 2. Make sure t he rubber bumpers are aligned and locked on t he indent s. S1 S2 F1 F2 F3 MODE ENTER Removing the Rubber Bumpers From t he rear of t he t ablet PC, remove t he rubber bumpers.
S10A User Manual Inserting a Memory Card You can insert an SD card t o st ore dat a, which needs t o be lat er t ransf erred t o anot her machine, or t o simply expand t he st orage capacit y of t he S10A. You can use SD cards up t o 8GB in size. 1. Open t he SD card compart ment cover. DC IN 2. Insert t he SD card wit h t he met al cont act s f acing upwards, unt il it clicks int o place. DC IN 3. Close t he memory card compart ment cover.
S10A User Manual Removing a Memory Card 1. Open t he SD card compart ment cover. DC IN 2. Press t he SD card inwards t o ej ect it f rom t he sl ot . DC IN 3. Remove t he card and close t he SD card compart ment cover.
S10A User Manual Inserting 3G SIM Card (optional) 1. Make sure t he syst em is t urned of f . Unscrew t he SIM card compart ment cover. 2. Push t he SIM card int o t he slot , wit h t he met allic part f acing up and t he clipped corner f acing inward, unt il it clicks int o place. 3. Screw t he SIM card compart ment cover. Removing 3G SIM Card (optional) Slight ly push t he SIM Card inwards t o pop it out .
S10A User Manual Installing an MSR (optional) 1. Make sure t he syst em is t urned of f . 2. Unscrew t he right compart ment cover t o remove. 3. At t ach t he MSR connect or t o t he connect ors inside t he compart ment . 4. Screw t o secure t he MSR module ont o t he t ablet PC.
S10A User Manual Installing a Scanner (optional) The 1D or 2D barcode scanner module comes wit h a 2M CCD camera. 1. Make sure t he syst em is t urned of f . 2. Unscrew t he lef t compart ment cover. 3. Remove t he camera connect or. 4. At t ach t he scanner connect or t o t he connect or inside t he compart ment . 5. Screw t o secure t he scanner module ont o t he t ablet PC.
S10A User Manual Upgrading Components Removing the Memory 1. Make sure t he syst em is t urned of f . 2. Move t he power swit ch t o t he lef t t o ensure bat t ery power is complet ely cut of f . See “ Using t he Power Swit ch” on page 8. 3. Unscrew t he memory compart ment cover. SW1 Lock Lock Lock Lock 4. Release t he ret aining clips t o ej ect t he memory f rom t he socket . Replacing the Memory 1. Gent ly push new memory int o t he socket unt il t he ret aining clips click int o place.
S10A User Manual 2. Screw t he memory compart ment cover back. Lock Lock Removing the Hard Disk Drive S10A comes wit h an 80G PATA hard disk drive. If more space is required f or your applicat ion or t here is a need t o t ransport t he hard disk cont ent , f ollow t he st eps below t o remove t he hard disk drive. 1. Make sure t he syst em is t urned of f . 2. Move t he power swit ch t o t he lef t t o ensure bat t ery power is complet ely cut of f . See “ Using t he Power Swit ch” on page 8. 3.
S10A User Manual Replacing the Hard Disk Drive 1. Insert t he hard disk int o t he slot wit h t he connect or f acing down. 2. Connect t he hard disk connect or. 3. Screw t he lef t compart ment cover back. Removing the Battery 1. Make sure t he syst em is t urned of f . 2. Move t he power swit ch t o t he lef t t o ensure bat t ery power is complet ely cut of f . See “ Using t he Power Swit ch” on page 8. SW1 3. Unscrew t he bat t ery compart ment cover. Lock Lock Lock Lock 4.
S10A User Manual Replacing the Battery 1. Connect t he bat t ery connect or t o t he connect or inside t he compart ment . 2. Place t he bat t ery inside t he compart ment . Lock Lock Lock Lock 3. Screw t he bat t ery compart ment cover back.
S10A User Manual Making Connections Connecting the Power Bef ore you can use your S10A, you must f ully charge t he bat t ery. Connect t he power adapt er as shown and leave t o charge f or: • a minimum of 4 hours when using t he int ernal bat t ery • a minimum of 8 hours when a second bat t ery is inst alled Connecting to a Monitor You can connect t he S10A t o an ext ernal monit or f or enhanced viewing. Connect one end of a VGA cable t o t he VGA port on t he right side of t he S10A.
S10A User Manual Connecting USB Devices You can connect peripheral devices, such as a USB keyboard and mouse, as well as ot her wireless devices using t he USB port s on t he lef t side of t he S10A. MOLEX MOLEX You can also connect direct ly t o anot her PC using t he USB port s. Connecting Headphones You can connect a pair of headphones using t he headphone j ack on t he right side of t he S10A.
S10A User Manual Connecting a Microphone The S10A f eat ures a built -in microphone, but you can st ill connect an ext ernal microphone if needed. Connect t he microphone t o t he microphone j ack on t he right side of t he S10A as shown.
S10A User Manual Turning On 1. Move t he power swit ch t o t he right . SW1 2. Press and hold t he power but t on t o t urn on t he S10A. SD DC IN Turning On for the First Time (If you are using Windows XP Professional Embedded) When you f irst t urn on t he S10A, t he f ollowing set up screens will appear. Follow t hese inst ruct ions t o validat e your version of Windows XP and set up your syst em correct ly. 1. The Welcome screen appears. Tap Next t o cont inue. 2.
S10A User Manual 3. Ent er t he 25-digit product key t o validat e your copy of Windows. Tap Next t o cont inue. 4. Ent er a name t o ident if y your S10A. This t he name by which it will be recognized on all connect ed net works. You can also ent er a descript ion if required. Tap Next t o cont inue. 5. Ent er an administ rat or password and re-conf irm. Tap Next t o cont inue. 6. Choose whet her or not t o make t he S10A part of a domain.
S10A User Manual 7. Choose whet her or not t o act ivat e your copy of Windows immediat ely or at a lat er dat e (we recommend you act ivat e t he sof t ware immediat ely). Tap Next t o cont inue. 8. You can now conf igure your int ernet connect ion. Tap Yes, help me connect to the Internet t o run t he Int ernet Conf igurat ion Wizard. Tap Next t o cont inue. 9. Ent er t he names of ot her users of your S10A. You can add up t o f ive users. Tap Next t o cont inue. 10. Tap Finish t o complet e t he set up.
S10A User Manual Controlling the S10A Using the Touch Screen The S10A is equipped wit h t ouch screen t echnology, f or ease of use when you are on t he go. Simply t ap t he screen wit h your f inger t o select icons and run applicat ions. Using the Tap Function When you t ap on t he screen wit h t he a pen or st ylus, it emulat es click f unct ions of a regular mouse. • To emulat e a lef t click single t ap t he screen once. • To emulat e a right click t ap and hold t he screen.
S10A User Manual 2. Tap t he Calibrate t ab and you will see t wo opt ions: Standard Calibration: select t his opt ion t o st art 5 point s St andard Calibrat ion. • Advanced Calibration: select t his opt ion t o use 4, 9, 16, or 25 point s t o calibrat e t he screen. Check Plot calibration data t o enable t ouch panel linearit y comparison graph. The blue lines show linearit y bef ore calibrat ion and black lines show linearit y af t er calibrat ion. 3.
S10A User Manual Using the Control Panel Buttons The cont rol panel but t ons are locat ed on t he f ront side of S10A. See below f or a descript ion of each but t on and it s f unct ion. Button F1 F2 MODE ENTER S1 S2 Name F3 Function Funct ion Press t o access your f avorit e programs. Keyboard Press t o access t he on-screen keyboard. Mode Press t o enable/ disable mode. Ent er Press t o emulat e t he Ent er key.
S10A User Manual Configuring the Function Buttons The F1, F2, F3, S1 (F4) and S2 (F5) can be conf igured as short cut s t o access your f avorit e or f requent ly used programs. 1. Press t he f unct ion but t on t o which you want t o assign a program short cut t o. The f unct ion but t on screen appears. 2. Tap t o locat e t he program on t he hard drive. 3. To remove a conf igured program, t ap . 4. Tap OK t o save all new set t ings.
S10A User Manual Adj usting Screen Brightness 1. Ensure mode is enabled. 2. Press S1 t o decrease bright ness, or S2 t o increase bright ness. Adj usting the Volume 1. Tap t he Volume icon on t he syst em t ray. 2. Move t he slide t o adj ust volume.
S10A User Manual Wireless Connections WiFi Connection Note WiFi access requires a separat e purchase of a service cont ract wit h a wireless service provider. Cont act a wireless service provider f or more inf ormat ion. The S10A comes pre-loaded wit h WLAN module, you can send and receive signals t o a WiFi net work t hen synchronize f iles. A wireless net work can be added eit her when t he net work is det ect ed or by manually ent ering set t ings inf ormat ion.
S10A User Manual 3. You are prompt ed t o ent er a WEP key f or secure access. Cont act t he net work administ rat or f or t his key. 4. Ent er t he required WEP key and reent er t he key f or conf irmat ion and t hen t ap Connect . 5. The wireless connect ion is negot iat ed and you see t he f ollowing screen. The wireless connect ion icon in t he not if icat ion area shows a connect ed st at us whenever a wireless connect ion is present .
S10A User Manual Configuring a New Wireless Network Should you need t o conf igure a set of comput ers t o creat e a new wireless net work, do t he f ollowing: 1. Tap t he wireless icon in t he Windows syst em t ray t o open t he Wireless Net work Connect ion St at us screen. 2. Tap Set up a wireless network for a home or small office . The Wireless Net work Set up Wizard begins. 3. Tap Next t o cont inue set up. 4.
S10A User Manual Next t o cont inue. (Skip t o step 8 if you decide t o conf igure each comput er manually. ) 6. Insert your USB f lash drive int o a f ree USB slot and select t he drive name f rom t he dropdown list . Tap Next t o cont inue. 7. All your current net work set t ings are copied t o your USB f lash disk. Tap Next t o cont inue. 8. Set up is complet e. Tap Print Network Settings t o print a list of set t ings if you are conf iguring each comput er manually.
S10A User Manual Bluetooth Connections The S10A comes wit h built -in Bluet oot h f unct ionalit y t hat allows you t o connect and communicat e wit h ot her Bluet oot h-enabled devices. Setting Up Bluetooth Follow t hese inst ruct ions t o set up a Bluet oot h connect ion. 1. Tap Start > Control Panel and double-t ap Bluet oot h Device Propert ies t o open t he Bluet oot h Devices screen. 2. Tap Add t o open t he Add Bluetooth Device Wizard. 3.
S10A User Manual 4. The Wizard searches f or and displays ot her Bluet oot h devices wit hin range. 5. Tap t he device you want t o connect t o and t ap Next . You are prompt ed f or a passkey. 6. Select your opt ion and t ap Next . 7. The Wizard at t empt s t o connect wit h t he ot her device and prompt s t he ot her device t o input t he passkey. If t he ot her device has successf ully accept ed t he passkey, t he devices are connect ed and t he Wizard f inishes.
S10A User Manual GPS Connection (optional) GPS f unct ion comes opt ional wit h S10A. It allows you t o view your GPS posit ions. The f ollowing illust rat ion demonst rat es how t he GPS viewer operat es. It is only an example. 1. From t he Com Port drop down menu t ap COM5 t o select COM5 as your com port . 2. From t he Baudrat e drop down menu t ap 4800 t o select 4800 as your baudrat e. 3. Tap Open GPS t o st art GPS. 4. When sat ellit es are det ect ed, t heir posit ions are shown on t he map.
S10A User Manual Advanced Settings Configuring Touch Screen Function Tap t he point er device icon in t he syst em t ray t hen select t he Tools t ab > or t ap Start > All Programs > PenMount Universal Driver > PenMount Control Panel t o access PenMount Cont rol Panel. Tap t he t abs at t he t op of t he screen t o access t he set t ings screens. The cont ent s in each t ab page may vary based upon t he version of t he operat ing syst em you are using.
S10A User Manual Checking Battery Status As it is likely you will be using your S10A when out and about , it is import ant t hat you monit or t he bat t ery st at us regularly, t o ensure you do not run out of power at a crit ical moment . Double t ap on t he Power icon on t he syst em t ray t o view det ailed inf ormat ion. The bat t ery screen appears: Tap on t he bat t ery icon f or more det ailed inf ormat ion. Note 38 #1 bat t ery indicat es t he st at us of t he int ernal bat t ery.
S10A User Manual Power Options You can conf igure specif ic power opt ions t o best suit your needs and t o get t he most out of your bat t ery. Tap on t he Power icon in t he syst em t ray t o view t he power options menu. See below f or a descript ion of t he set t ings f or each power opt ion.
S10A User Manual Maintenance Maintaining the Battery • Do not expose heat or at t empt t o disassemble t he bat t ery, and do not pl ace t he bat t ery in wat er or in a f ire. • Do not subj ect t he bat t ery t o st rong impact , such as a blow f rom a hammer, or st epping on or dropping it . • Do not punct ure or disassemble t he bat t ery. • Do not at t empt t o open or service t he bat t ery. • Replace only wit h bat t eries designed specif ically f or t his product .
S10A User Manual Troubleshooting Recovering from a System Crash (Windows XP Professional Embedded) In t he unlikely event t hat your S10A should crash, do t he f ollowing t o re-boot your syst em if you are using Windows XP Prof essional Embedded. 1. Connect a USB keyboard t o t he USB port on your S10A. MOLEX F1 1 ` End Tab Caps Lock Shift Ctrl F2 @ F3 # 2 Q Z Alt R D X F5 % 5 E S A F4 $ 4 3 W F C F7 & 7 8 U H B F8 M > .
S10A User Manual Recovering from a System Crash (Windows XP Embedded) Note If you are using an SD card f or dat a st orage, your S10A will f ollow t he recovery procedures t o re-boot your syst em. If you are using Windows XP Embedded, f ollow t hese st eps t o perf orm a recovery procedure using a USB f lash drive should your syst em crash: 1. Download t he FORMATUPD. EXE f ile t o your local drive (C: \ ). 2. Connect a USB f lash drive t o your comput er. 42 3.
S10A User Manual 13. Highlight Save & Exit Setup and press Enter. 14. Press Y t o save and exit when t he conf irmat ion message appears. 15. The syst em will now ent er recovery mode. Click OK t wice t o cont inue. 16. Once t he process is complet e, click Quit , remove t he USB f lash drive and t he syst em will rest art aut omat ically.
S10A User Manual Appendix Specifications Feature 44 Description Operat ing Syst em Windows XP Embedded/ Windows XP Prof essional Embedded Windows Vist a Basic Processor Int el ATOM Z530 1. 6G / Z510 1. 1G Chipset US15W Memory One SO-DIMM DDRI 533 support up t o 2GB St orage Compact Flash (CF) Memory Card (4G/ 8G) Display 10.
S10A User Manual Feature Description LED St at us Indicat ors Power LED: Of f : Power of f Solid green: Lit when charging in power of f mode, of f when charging is complet e Blinking green: Power on, bat t ery is charging in power on mode Solid yel low: Power on, bat t ery l ow Blinking yell ow: Power on, bat t ery crit ically low HDD LED: Green when HDD is being accessed WLAN LED: Of f : No RF signal / No LAN connect ion Solid Green: WLAN act ivat ed Blinking Green: TX/ RX t ransmission Ot her Componen
S10A User Manual Feature Cert if icat ion Opt ional Device / Accessories 46 Description CE, FCC 1D / 2D Barcode Scanner MSR 1+2+3 t rack GPS Module Desk Docking Hand St rap VESA Mount Ext ernal Bat t ery Holst er
S10A User Manual Optional Accessories External Battery You can use an ext ernal bat t ery t o ext end t he power of your t ablet PC. Battery specification: 3800mA 3S2P Installing the External Battery 1. Remove t he ext ernal bat t ery cont act s cover f rom t he t ablet PC (A). B 2. Insert t he cont act s cover on t he ext ernal bat t ery (B). A SW1 3. Align and insert t he bat t ery on t he t ablet PC (C). 4. Lock t o secure t he bat t ery in place (D).
S10A User Manual Tablet PC Docking You can use t he docking st and t o dock t he t ablet PC when you are at your home or on your of f ice desk. When docked, you can charge bot h t he int ernal and ext ernal bat t eries or t ransf er dat a f rom your t ablet PC t o anot her PC. At t ach t he S10A t o t he docking st and as shown. To charge t he ext ernal bat t ery, at t ach t he bat t ery t o t he docking st and as shown below.
S10A User Manual Docking Connectors See below f or t he rear view of t he docking and a descript ion of all port s and connect ors. DC19V 1 No. Component 2 3 4 Function 1 LAN port Connect an RJ-45 cable t o access LAN connect ion. 2 Serial port Connect a serial cable t o connect t o anot her PC. 3 USB port s Connect USB connect ors t o t ransf er dat a. 4 DC-IN Connect t he AC adapt er t o charge t he bat t ery.
S10A User Manual Docking Specifications Feature 50 Description Product Name S10A Tablet PC Docking Model Number S10AC Ext ernal I/ O Int erf aces One One Two One Power Adapt er Universal AC 90V ~ 265V, 47~63Hz input ; 19V, 3. 16A out put Physical Size 230 x 154 x 252 mm Environment Operat ing Temperat ure -20ºC t o 60ºC St orage Temperat ure -40ºC t o 70ºC Operat ing Humidit y 10% ~ 95% Cert if icat ion CE, FCC LAN port RS-232 USB 2.
S10A User Manual Adj ustable Stand You can use t he adj ust able st and t o provide desk support when you are at home or in your of f ice. ck Lo 1. Fast en f our screws t o at t ach t he t wo st and bracket s t o your Tablet PC. 2. Fast en t he f our screws t o at t ach t he st and t o t he bracket s. ck Lo Attaching the Adj ustable Stand 3. Pull t o adj ust t he st and t o desirable angle.
S10A User Manual Handstrap and Shoulder Strap A det achable handst rap and shoulder st rap are provided t o carry your Tablet PC securely and saf ely. You can use t he supplied handst rap and shoulder st rap separat ely or t oget her t o carry t he S10A when you are out side your home or of f ice. Handst rap Shoulder St rap Screws When using t he handst rap and shoulder st rap separat ely: • At t ach t he handst rap t o t he rear of your t ablet PC using t he f our short screws.
S10A User Manual The handst rap makes it easy t o carry t he device on one hand. Lock Lock • At t ach t he shoulder st rap t o t he rear of your t ablet PC using t wo screws as shown.
S10A User Manual When using t he handst rap and shoulder st rap t oget her: • At t ach t he handst rap t o t he rear of your t ablet PC using t he f our screws. Then hook t he shoulder st rap as shown. Lock Lock Vesa Mount Vesa mount can be used wit h a variet y of alt ernat e mount ing solut ions such as wall mount s. • Inst all t he vesa mount by screwing on t he screws as shown.
