MULTIFAN SERIES COMPONENT USB COOLING FAN USER MANUAL
WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www. acinfinity.com and click contact for our contact information. EMAIL support@acinfinity.com WEB www.acinfinity.
MANUAL CODE MF2010X1 PRODUCT MULTIFAN S1 MULTIFAN S2 MULTIFAN S3 MULTIFAN S4 MULTIFAN S5 MULTIFAN S7 MULTIFAN S3-P MULTIFAN S7-P MULTIFAN MINI 4 MODEL AI-MPF80A AI-MPB140A AI-MPF120A AI-MPF140A AI-MPF80A2 AI-MPF120A2 AI-MPF120P AI-MPF120P2 AI-MPF40A UPC-A 854759004327 854759004495 854759004310 854759004365 854759004334 854759004341 854759004761 854759004778 819137020559
MANUAL INDEX Manual Index ................................................................................. Page 5 Product Requirements ................................................................... Page 6 Key Features ................................................................................. Page 7 Product Contents ........................................................................... Page 8 Silicone Feet ..................................................................................
PRODUCT REQUIREMENTS The MULTIFAN series is designed to cool various AV components by accelerating cool air intake or heat exhausting. Make sure the following requirements are met to ensure optimal cooling. FULLY ENCLOSED CABINETS USB cooling fans are ineffective in enclosed cabinet applications. Air must be able to flow in and out of the cabinet to be ventilated. Make sure your cabinet is open in the front or has ventilation holes.
KEY FEATURES ANTI-VIBRATION SILICONE Specially designed rubber feet helps keep the noise level down when the fan is vibrating against a hard surface. SPEED CONTROLLER A speed controller located on the cord permits you to adjusts the fan’s speed and power off the fan. USB CONNECTOR Allows the fan unit to be powered by a standard USB port, a common power source in home electronics. DUAL BALL BEARINGS Allows the fan unit to be powered by a standard USB port, a common power source in home electronics.
PRODUCT CONTENTS MULTIFAN S1 MULTIFAN S3 MULTIFAN S4 MULTIFAN S3-P AI-MPF80A AI-MPF120A AI-MPF140A AI-MPF120P (1) Single USB fan with Speed Controlller Model AI-MPF120P contains Turbo Power Adapter MULTIFAN S5 MULTIFAN S7 MULTIFAN S7-P AI-MPF80A2 AI-MPF120A2 AI-MPF120P2 (1) Dual USB Fans with Speed Controller Model AI-MPF120P2 contains Turbo Power Adapter MULTIFAN S2 AI-MPB140A (1) Single USB Blower with Speed Controller MULTIFAN MINI AI-MPF40A (1) Single USB Mini Fan with Speed Controller 8
SILICONE FEET FEET DETACHMENT - FANS The fan’s silicone feet can be detached to save space. Easily unscrew the feet from the fan’s frame. Put the screw back in after to secure the fan guard. FEET DETACHMENT - BLOWERS The silicone feet is necessary to prevent the blower from scratching your electronics. It also reduces noise caused by airflow turbulence from underneath the blower. To remove, please pull on the bottom of the feet carefully.
SILICONE FEET FEET REATTACHMENT - FANS If you want to install the feet back, simply insert the silicone feet through the guard and onto the fan’s screw hole. Turn until you feel the screw tightening but do not overextend or the screw will slip through the rubber feet. FEET REATTACHMENT - BLOWERS If you are powering the register fan with an external outlet, run the power cord towards the groove on the side of the register fan.
POWERING USB PORT Plug the fan’s USB connector into a standard USB port. Please use a dedicated USB port rated 500 mA or higher, the standard on most electronics. Please note that some electronics will have active power for their USB ports even when the electronic is powered off. This causes the fans to run even if the electronic device is powered off. POWER OUTLET (SOLD SEPARATELY) Check the LCD display to see if it is lit and shows a number reading.
SPEED CONTROLLER INLINE 3-SPEED CONTROLLER The speed controller located on the cord allows you to adjust the fan’s speed from off to low, medium, and high. This enables you to set the fan to optimal noise and airflow levels for various environments. Any fans that are daisy chained will also have their speed changed. Please make sure that the additional fans connected to the fan closest to the power source have their speed set on high.
ADDING MORE UNITS DAISY CHAINING FANS Up to four fans can be daisy chained to share the same USB port. Up to six fans can be daisy chained to share the same Boost Speed Adapter or Thermostat Fan Controller, both sold separately. Dual fans such as MULTIFAN S7 count as two fans.
APPLICATIONS TOP EXHAUST - FANS The USB cooling fans can be placed on top of electronics that have vents on the top, such as a DVR receiver to help draw out hot air. Unused rubber feet can be detached to save space. TARGET COOLING - FANS The USB fans can also stand upright to target a specific electronic, component, or area you wish to cool. They can also help circulate air in narrow places such as inside a computer desk or home theater cabinet by pushing hot air away.
APPLICATIONS REAR EXHAUST - BLOWERS The USB blowers are designed to help exhaust hot air from electronics housed in tight shelves in which a fan may not have adequate space to blow upwards. They should be placed on top of electronics that have ventilations holes on top such as receivers, amplifiers, and other audio video equipment.
MULTIFAN FAQ Q: Can I mount this fan vertically? A: Yes. The MULTIFAN can be mounted in any orientation, including vertically. Q: Can I flip the fan to create intake or exhaust airflow? A: Yes, this fan creates intake and exhaust airflow. Simply flip the MULTIFAN around to achieve the desired airflow. Q: Can I splice the cables to extend them? A: We do not recommend hardwiring or splicing our fan's power wires. Such modifications may compromise electrical safety and will void this product's warranty.
AC INFINITY PRODUCTS AIRPLATE SERIES The AIRPLATE series is designed to cool home theater and audio video cabinets. The fans are powered by USB port or power outlets. Includes an inline speed controller and Boost Speed Adapter. The fans can also be temperature controlled with an Advance Thermal Controller (sold separately). PRODUCT AIRPLATE S1 AIRPLATE S3 AIRPLATE S5 AIRPLATE S7 AIRPLATE S9 MODEL AI-CFS80BA AI-CFS120BA AI-CFD80BA AI-CFD120BA AI-APS9 DIMENSIONS 4.6 x 4.6 x 1.3 in. 6.3 x 6.3 x 1.3 in. 8.
WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships.
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
