User Guide © 2010 Abstract Data Ltd. http://www.abstractdata.biz/ info@abstractdata.biz Version 1.
Page 1 of 4 Kick Drum & Low Frequency Percussion Synth ON: Left: Power On Right: Power Off PUNCH: Left: Off Right: On ENV ATTACK: Left: Fast Attack Right: Slow Attack LED: Power On indicator OSC1 PITCH: Sets the fundamental (centre) frequency of Oscillator 1 ENV DECAY: Sets the Envelope Decay Time OSC2 LEVEL: Sets the volume of Oscillator 2 OSC2 PITCH: Sets the fundamental (centre) frequency of Oscillator 2 OSC2 PARAM1: Used with OSC2 PARAM2 this affects the frequency that Oscillator 2 su
Page 2 of 4 Kick Drum & Low Frequency Percussion Synth AUDIO OUT: Main Audio Output: 6.5mm (1/4”) Mono Socket CV TRIGGER IN: +DC Pulse from approx. +5 to +20V DC at approx. 20 milliseconds or less 6.5mm (1/4”) Mono Socket AUDIO TRIGGER IN: Accepts most fast-attack, short-duration audio signals at line level 6.5mm (1/4”) Mono Socket *POWER IN: 12 Volt DC @ approx. 300mA 2.
Page 3 of 4 Kick Drum & Low Frequency Percussion Synth Features: • 100% Analog • 2 independent sine-wave oscillators • Wide-range synthesis controls • Second oscillator will self oscillate • Capable of very low frequencies • Punch switch for high-impact hits • Attack switch & Envelope Decay control • Triggers via line-level Audio & CV Pulse • Trigger sensitivity allows for accents • Trigger speed goes to audio frequencies • Chrome-plated case & pro hardware • Limited-edition run Troubleshooting: Proble
Page 4 of 4 Kick Drum & Low Frequency Percussion Synth Print or photocopy this sheet to record the settings of your favourite sounds.
