Warranty

ManualsBrandsABSCO ManualsGarages & Outdoor StorageFortress 9.8 ft. x 2.5 ft. x 7.8 ft. Woodland Gray Metal Shed

Absco Industries

Fortess Shed Model: 30081LK-PTX

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 1

PAGE 01

ABSCO FORTRESS SHED

Model: 30081LK

INSTRUCTIONAL VIDEOS

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK 11 May 2018

G:\Product Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress Shed

THIS PRODUCT IS DESIGNED FOR INSTALLATION ON, AND ANCHORING TO, A CONCRETE SLAB FOUNDATION.

IT IS RECOMMENDED THAT THE CONCRETE SLAB IS AT LEAST 4” THICK.

TO MINIMISE WATER INGRESS AT THE BASE OF THE STRUCTURE, A 1 3/16” HIGH REBATE IS RECOMMENDED FOR

THE PERIMETER OF THE INSTALLATION AREA - REFER TO PAGE 16 FOR DETAILS

NOTE THAT IF THIS REBATE IS PRESENT, THE FRONT AND REAR FRAMES WILL NEED TO BE CUT DOWN TO SUIT

NOTE: CUTTING FRAME SECTION RESULTS IN A MORE EFFICIENT AND NEATER FINISH TO THE FINAL STRUCTURE,

AS OPPOSED TO CUTTING THE SHEETING/CLADDING

UNDULATIONS IN ANY FOUNDATION WILL LIKELY AFFECT THE ALIGNMENT OF SHEETING/CLADDING, TRIMS

AND FRAME ASSEMBLIES - THE USE OF PACKERS, SHIMS, OR WEDGES IS RECOMMENDED WHERE NECESSARY

IT IS RECOMMENDED THAT ENGINEERING SERVICES ARE ENGAGED FOR FURTHER OR ALTERNATE

FOUNDATION SPECIFICATIONS

9’ 9 13/16” WIDE

2’ 6 7/16” DEEP

7’ 10 1/2” HIGH

Summary of content (23 pages)

PAGE 1
ABSCO FORTRESS AbscoSHED Industries Model: Fortess 30081LK Shed Model: 30081LK-PTX INSTRUCTIONAL VIDEOS 9’ 9 13/16” WIDE 2’ 6 7/16” DEEP 7’ 10 1/2” HIGH THIS PRODUCT IS DESIGNED FOR INSTALLATION ON, AND ANCHORING TO, A CONCRETE SLAB FOUNDATION. IT IS RECOMMENDED THAT THE CONCRETE SLAB IS AT LEAST 4” THICK.
PAGE 2
Absco Industries INSTRUCTIONAL ABSCO FORTRESS SHED Model: 30081LK VIDEOS Fortess Shed Model: 30081LK-PTX (MIN 6’) 13/32” ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 2
PAGE 3
Absco Industries Fortess Shed Model: 30081LK-PTX Assembly Process 4 5 7 10 12 14 15 16 17 18 19 21 22 ABSCO INDUSTRIES Parts Checklist - Unpack and Check All Parts General Assembly Guide Front Frame Construction Rear Frame Construction Roof Frame Construction Wall Frames Assembly Roof Frame Assembly Anchoring Roof Sheet Cladding Wall Sheet Cladding Gutter Installation Trim Installation Clean Up & Troubleshooting ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/
PAGE 4
Absco Industries ABSCO FORTRESS SHED Model: 30081LK INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX QTY IMAGE DESCRIPTION 232S SHEET - STRAIGHT CUT 7' 7 5/16" LONG 2' 6 7/16" WIDE 6 080S SHEET - STRAIGHT CUT 2' 7 5/16" LONG 2' 6 7/16" WIDE 4 042S SHEET - STRAIGHT CUT 1' 4 9/16" LONG 2' 6 7/16" WIDE 4 199N SHEET - STRAIGHT CUT 6' 6 3/8" LONG 1' 15/16" WIDE (attn: RAW EDGE 1 SIDE) 2 QTY IMAGE DESCRIPTION TR06 BARGE CAPPING TYPE 02 10' 1/16" LONG 2 TR22 GUTTER 9' 11 5/16" LONG 1 1 2 1
PAGE 5
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX (9’ 8 9/16”) C-TYPE - STRAIGHT CUT AT BOTH ENDS M-TYPE - 1 3/4” LIP NOTCH AT BOTH ENDS J-TYPE - STRAIGHT CUT AT ONE END: 13/16” TAB NOTCH N-TYPE - STRAIGHT CUT AT ONE END : 1 3/4” LIP NOTCH WITH HOLES AT OTHER END & 13/16” TAB NOTCH WITH HOLES AT OTHER END K-TYPE - 13/16” TAB NOTCH WITH HOLES AT BOTH ENDS P-TYPE - 1 3/4” LIP NOTCH : 13/16” TAB NOTCH WITH HOLES AT BOTH ENDS L-TYPE - STRAIGHT CUT AT
PAGE 6
11 13/16” ABSCO INDUSTRIES FAST014 HIGH SIDE B ASSEMBLY INSTRUCTION MANUAL LOW SIDE A LOW SIDE B MODEL: 30081LK-PTX LOW SIDE HIGH SIDE (PRINT) A LOW SIDE HIGH SIDE (PRINT) Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX B HIGH SIDE A FAST014 18/07/19 6
PAGE 7
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX C0272 C2300 FAST014 C2300 K0312 FAST014 C0100 FAST014 FAST014 BKT17 H2295 FAST014 FAST014 C0100 C2295 FAST014 BKT17 C2300 @ BOTH ENDS BKT17 ON OPPOSITE SIDE FOR 2ND H2295 FLANGE NOTCHED S2960 FLANGE NOTCHED FAST014 K0312 C2300 ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 7
PAGE 8
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK FortessSHED Shed Model: 30081LK-PTX VIDEOS 3 9/16” LONG FAST014 S2960 H2295 S2960 C2300 C2300 H2295 BKT17 FAST014 FAST014 C2295 S2960 3 9/16” LONG K0250 FAST014 1990 1180 3’1180 10 7/16” ABSCO INDUSTRIES 140 H2295 5 1/2” 140 6’ 6 3/8”1990 C2295 ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 8
PAGE 9
Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX ABSCO FORTRESS SHED Model: 30081LK 2960 9’ 8 9/16” A 5305 / 8” 6’ 4 1950 3/4” B 2303 7’ 6 11/16” 7’ 6 11/16” 2303 132 7’ C 7’2300 6 9/16” 1’330 1“ 1’330 1“ 9’2960 8 9/16” A B c B A FAST014 3 9/16” LONG NOTCH B B R0550 R0550 R0550 R0550 R0550 R0550 R0550 K0250 FAST014 FAST014 ABSCO INDUSTRIES 42 1 5/8” BKT11 S2960 1500 4’ 11 1/16” ASSEMBLY INSTRUCTION MANUAL 42 1 5/8” MODEL: 30081LK-PTX 18/07/19 9
PAGE 10
Absco Industries INSTRUCTIONAL ABSCO FORTRESS SHED Model: 30081LK VIDEOS Fortess Shed Model: 30081LK-PTX FAST014 J2220 C2200 FAST014 FAST014 C0100 C2235 FAST014 BKT17 J2220 FLANGE NOTCHED FAST014 FLANGE NOTCHED M2960 J2220 ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 10
PAGE 11
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX FAST014 C2235 M2960 K1460 FAST014 K1460 K1460 K1460 9’ 2960 8 9/16” A D FAST014 B C 7’ 4 3/16” 2240 12 ’2 337/ 1136 ” 5 1/2” 140 3’ 10 7/16” 1180 BKT11 42 1 5/8” M2960 ABSCO INDUSTRIES 42 1 5/8” K1460 J2220 J2220 A K1460 B C2235 C2235 K1460 ASSEMBLY INSTRUCTION MANUAL BKT11 M2960 1500 4’ 11 1/16” C MODEL: 30081LK-PTX M2960 D 18/07/19 11
PAGE 12
Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX ABSCO FORTRESS SHED Model: 30081LK FAST014 C0740 C0100 C0100 K1460 K1460 FAST014 C0740 46 0 K1460 K1460 C0740 FAST014 C0740 ABSCO INDUSTRIES ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUALMODEL: 30081LK MODEL: 30081LK-PTX 11 May 2018 ASSEMBLY INSTRUCTION MANUAL 18/07/19 12
PAGE 13
ABSCO FORTRESS SHED Model: 30081LK VIDEOS Absco Industries Fortess Shed Model: 30081LK-PTX 9’2960 8 9/16” A B 0’51/ 310 016 ” K1460 A C0740 K1460 C0740 K1460 B ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK 11 May 2018 G:\Product Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress Shed ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX PAGE 13 18/07/19 13
PAGE 14
Absco Industries Fortess Shed Model: 30081LK-PTX FOLD ONE K0628 K0628 K0628 K0628 K1460 K0628 K0628 FAST014 2’ 13/16” APART, USING A LADDER, LENGTH FAST014 K1460 2’ 13/16” K0628 630 /16” 1 51 7’2142 K0628 FRONT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK 11 May 2018 G:\Product Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress Shed ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX PAGE 14 18/07/19 14
PAGE 15
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX NOTE: TO AVOID CREATING A TIGHT SPACE FOR THE INSTALLATION OF THE ROLLER DOOR, THE ROLLER DOOR BRACKETS CAN BE FITTED ONTO THE H2295 SECTIONS, SO THAT THE ROLLER DOOR CAN BE LIFTED ONTO THEM PRIOR TO SECURING THE ROOF FRAME ONTO THE FRONT AND REAR FRAMES.
PAGE 16
Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX ABSCO FORTRESS SHED Model: 30081LK 9’ 8 9/16” WIDE x 2’ 5 1/2” DEEP TO ALLOW FOR THE 4” 4” 3/8” 3/8” 7’2340 8 1/8” 325 12 13/16” 4 15/16” 75 DOOR OPENING 85 75 125 3 3/8” 85 1446 85 TO SIDE OF J2220 WITH BKT17 FITTED 125 3” 75 3 3/8” 85 3” 75 2’ 773 6 7/16” 9’2993 9 13/16” 325 FRONT USE A 13/32” 2 3/16” FAST015 ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 16
PAGE 17
Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX ABSCO FORTRESS SHED Model: 30081LK 5 13/16” CENTRES 5 13/16” CENTRES + 1 5/16” (< 3/16”) 080S FAST035 FAST043 C0740 FAST035 FAST043 080S ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 17
PAGE 18
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX 232S FAST035 FAST035 232S 232S FAST035 042S 199N FAST035 199N ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX 18/07/19 18
PAGE 19
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX FAST009 1/8” TR22 TR25 FAST009 3 81 4 06” 51/11 0/8 ” /085” 41 4 1/8” x 3 1/8” 4 5/16” FROM RWG18 2 9/16” 2 3/8” (2 3/8” RWG06 ABSCO INDUSTRIES RWG06 ASSEMBLY INSTRUCTION MANUAL RWG06 MODEL: 30081LK-PTX FAST014 RWG06 18/07/19 19
PAGE 20
ABSCO FORTRESS SHED Model: 30081LK Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX RWG06 FAST009 1/8” RETAINING TONGUE RWG18 1/8” FAST009 TR40 1’ 2 3/16” LONG 1/8” 1/8” 4” 102 31 1 1/4” 31 FAST009 TR29 TR29 4105 1/8” ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK 11 May 2018 ABSCO INDUSTRIESG:\ProductASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX Management Files\2-Instructions (Source)\00-Absco - English\04-Fortress Shed PAGE 2020 18/07/19
PAGE 21
Absco Industries INSTRUCTIONAL VIDEOS Fortess Shed Model: 30081LK-PTX ABSCO FORTRESS SHED Model: 30081LK FAST035 TR42 FAST035 TR41 H2295 042S FAST035 2’ 7 3/16” FAST035 FAST043 TR06 FAST035 FAST035 FAST043 TR06 FAST035 9’ 10 1/8” ABSCO INDUSTRIES ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL ASSEMBLY INSTRUCTION MANUAL MODEL: 30081LK-PTX MODEL: 30081LK 11 May 2018 18/07/19 21
PAGE 22
Absco Industries INSTRUCTIONAL ABSCO FORTRESS Model: 30081LK VIDEOS FortessSHED Shed Model: 30081LK-PTX 1/8” ROLLER DOOR INSTALLATION INVOLVES THE ADJUSTMENT OF COMPONENTS UNDER SIGNIFICANT TENSION WHICH, IF UNDERTAKEN INCORRECTLY, CAN RESULT IN SERIOUS INJURY. IT SHOULD BE UNDERTAKEN BY TWO PEOPLE MINIMUM. IT IS RECOMMENDED THAT ONE IS SUITABLY TRAINED FOR THE TASK / TRADESPERSONS / INDUSTRY PROFESSIONAL. IF NOT ENGAGED THE INSTALL IS UNDERTAKEN AT USERS OWN RISK.
PAGE 23
Absco Industries Fortess Shed Model: 30081LK-PTX EXPORT PRODUCT WARRANTY AGAINST DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.