V6.
Warranty certificate Register your product with ABRAHAMSEN© and expand your warranty from two(2) to five(5) years. Use the included registration form or register online at www.abrahamsenaudio. com. For fastest processing, we recommend online registration. When we receive your registration, we will send you a warranty card. 2 Registrer ditt produkt hos ABRAHAMSEN© og utvid garantien fra to(2) til fem(5) år. Bruk det vedlagte registreringsskjema eller gå online på www.abrahamsenaudio.com.
Quality inspection 3 Thank you for chosing this ABRAHAMSEN© product. Y You will enjoy years of listening pleasure and true High End musical performance from your audio system. The signatures shown below certify that this product met or exceeded our strict standards. Takk for at du har valgt et produkt fra ABRAHAMSEN©. Du kommer til å nyte mange år med lytteopplevelse og ekte “High End” musikkgjengivelse fra ditt lydsystem.
Maintenance interval Adjustment: Cleaning: Idling Connectors DC Adjustment: PCB Cleaning: Idling Connectors DC Adjustment: PCB Cleaning: Idling Connectors DC Adjustment: PCB Cleaning: Idling Connectors DC Adjustment: PCB Cleaning: Idling Connectors DC PCB 4 5000Hours Date/Sign/Stamp 10000Hours Date/Sign/Stamp 15000Hours Date/Sign/Stamp 20000Hours Date/Sign/Stamp 25000Hours Date/Sign/Stamp Adjustment: Cleaning: Idling Connectors DC Adjustment: PCB Cleaning: Idling Connecto
V6.0 D/A /A Converter User and Quality Inspection Manual UK Warning: To avoid risk of fire or electric shock, do not expose this appliance to rain or moisture. Verify line voltage before use. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.The warranty is void if the product is tampered with by non-authorised personnel.Use only authorised ABRAHAMSEN© service center.
Introduction This user manual contains important information on the placement, installation, and operation of your ABRAHAMSEN© product. Please read this information thoroughly. A good understanding of these details will help ensure satisfactory operation and long life for your product. The story behind the sound. In 1972 Dr. Otala and Mr. Lohstro finished their work in analysing transistor amplifiers to determine what actually created the ”transistor sound” in general transistorized designs.
Before connection Unpacking the V6.0 Immediately upon receipt of the V6.0, inspect the carton for possible damage during shipment. The carton and packaging have been designed to provide the safest possible protection for the transport of your amplifier. Unpack the unit carefully. Save all packaging materials for future shipment. The contents of the carton 1 pcs ABRAHAMSEN© © V6.
Functions 8
Functions 9 Front panel controls 1. Power On/Off Switches the unit between On and Off. 2. Source and 3. Selector Press to select between USB playback or Digital Inputs 1,2 and 3. The corresponding LED will light up to show which source has been selected. Rear panel connections 1. Balanced Audio Outputs The V6.0 features true balanced (XLR) outputs. This is a higher quality output that can reject noise and interference with equipment with balanced inputs.
Functions 10 4. Test Only for service. 5. AC power Once you have completed all connections, plug the AC main cord to the V6.0 and the AC outlets. 6. USB/PC in USB ‘Type B’ input allowing direct connection to a PC via a Type B to Type A USB lead. The V6.0 operation is independent of your PC soundcard – it will operate whether your PC has a soundcard or not.
Windows installation 11 Connect a USB ‘B–A’ type lead (as illustrated on page 14) from the USB input on V6.0 to one of the USB ports on the PC. This is the normal type of USB lead with an oblong plug at one end and a square plug at the other. Switch on the V6.0 using the front panel On/Off switch and make sure that the USB input is selected (USB LED lit). The Windows “Found New Hardware” dialogue bubble should now appear at the bottom right-hand side of the Windows desktop. The description of the V6.
Installation and connection How to connect your product. Please read this pages carefully.(page 12 to 14) Do not under any circumstances connect or disconnect equipment when the power is turned on.
Installation and connection Unbalanced Audio Outputs Amplifier 13
Installation and connection Digital connection 14
Power up How to power up your system You should always power up your system the following way: Signal sources (CD player, tuner etc.) first, Then the D/A Converter/power amplifier. When turning your system off, you should start by switching off your power amplifier. Finally the signal source devices. Important notice For optimal sonic performance, the V6.0 should be burned in for a minimum time of 96 hours. If the product has been switched off, allow two hours of warm-up to optimise sonic performance.
Maintenance and Servicing Maintenance interval To maintain maximum performance and to protect your investment, it is essential that your product is serviced in accordance to the correct maintenance interval. Every 5000 hours we recommend you to have maintenance on your product. This operation involves, among other things, cleaning of connectors, adjustments of DC voltage and idling current(class A area). See page 4. Servicing Refer all servicing to qualified personnel.
If service is needed If Service is needed Your dealer will have all relevant information regarding the service station in your area, and will ensure that your unit is serviced with minimum delay. It is our general policy to have your unit returned to you within five working days. This is an average time, and can vary locally, depending on the workload at that particular service station.
Technical specification The following technical data were measured on randomized test objects and are typical data. All measurements are made with main voltage 120/240 V 50Hz / 60Hz. Clipping point of the product is set to a level where total harmonic distortion (THD) is 0.2%. Noise .....................................................................<100uV Frequency response -3dB .....................................DC-1MHz Slew rate ...............................................................
Warranty terms and conditions 1 ABRAHAMSEN© by ECS Holding warrants that this product will be free from any defects in matrials and/or workmanship for a period of to(2) years from the purchase date, five(5) if you have completed the warranty registration. 2 The extended warranty service is only available to the orginal consumer, who purchased this product directly from the retail dealer, and it can not be transferred.