802.11g Wireless LAN Card User’ s Manual Doc. No.
REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equip ment. Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and 2) This device must accept any interface received, including interface that may cause undesired operation.
Table of Contents INTRODUCTION.................................................................................................1 W IRELESS NETWORK OPTIONS ..........................................................................1 The Peer-to-Peer Network....................................................................1 The Access Point Network ...................................................................2 LED INDICATORS...............................................................................
A DVANCED TAB .................................................................................................25 SECURITY TAB....................................................................................................25 STATISTICS TAB..................................................................................................27 A BOUT TAB.........................................................................................................28 UNINSTALLATION....................................
INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you connect your computer to a wireless local area network (LAN). A wireless LAN allows your system to use wireless Radio Frequency (RF) technology to transmit and receive data without having to physically attach to the network. The Wireless protocols that come with this product ensure data security and isolation from interference generated by other radio frequencies.
You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers via a wireless LAN. The Access Point Network The network installation allows you to share files, printers, and Internet access much more conveniently. With Wireless LAN Cards, you can connect wireless LAN to a wired global network via an Access Point. LED Indicators Power Indicator: (Orange LED) This LED will illuminate when the driver is well-installed.
Act Indicator: (Green LED) This LED flickers when transmitting/receiving wireless data.
INSTALLATION Caution: Do not insert the Wireless LAN Card into your computer until the procedures in “Install the Drive r & Utility” has been performed. Install the Driver & Utility 3. 4. Exit all Windows programs. Insert the CD-ROM into the CD-ROM drive of your computer. If the CD-ROM is not launched automatically, go to your CD-ROM drive (e.g. drive D) and double-click on Setup.exe. The main screen of the CD-ROM opens. Click Install Driver & Utility to start the installation. 5.
6. The Choose Destination Location screen will show you the default destination chosen by the u tility. Click Next to continue. 7. Follow the instruction to select the program folder. Click Next to continue.
8.
Install the device 1 Note: Make sure the procedures in “Install the Driver & Utility” has been performed. 1. 2. 3. If you are using the Wireless PCI Card, before installing the device, make sure the computer is turned off. Remove the expansion slot cover from the computer. For Wireless CardBus users, please locate your CardBus slot. Carefully slide the Wireless PCI/CardBus Card into the PCI/CardBus slot. Push evenly and slowly and ensure it is properly seated.
Note for Windows 2000 users: During the installation, when the “Digital Signature Not Found” screen appears, click “Yes” to continue. Note for Windows XP users: 1. Select Install the software automatically (Recommended) and click Next.
3. Click Continue Anyway. 4. Click Finish to complete the installation. Verify Device Installation To verify that the device has been properly installed in your computer and is enabled, go to Start à Settings à Control Panel à System (à Hardware) à Device Manager. Expand the Network adapters item.
the 802.11g Wireless PCI/CardBus PC Card is listed, it means that your device is properly installed and enabled.
NETWORK CONNECTION Once the driver has been installed, you will need to make adjustments to your network settings. In Windows 98/ME 1. 2. Go to Start à Settings à Control Panel à Network. Make sure that you have all the following components installed. § 802.
If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided by Microsoft. 3. Next, highlight the specific network component you need, click Add. 4. Highlight Microsoft, and then double click on the item you want to add. Click OK. After returning to the Network screen, you can make your computer is visible on the network by enabling the File and Print Sharing. 5. Click the Identification tab.
6. Click the Access Control tab. Make sure that “ Share-level access control” is selected. If connecting to a Netware server, share level can be set to “ User-level access control.
7. When finished, restart your computer to activate the new device. 8. Once the computer has been rebooted, a Logon window will appear and will require you to enter a username and password. Enter a username and password and click OK. Do not click the Cancel button, or you won’ t be able to log onto the network. 9. Double-click the Network Neighborhood icon on the windows desktop, and you should see the names of the other PCs on the network. In Windows 2000/XP 1.
2. Make sure that you have all the following components installed. § Client for Microsoft Networks § NWLink NetBIOS § NWLink IPX/SPX/NetBIOS Compatible Transport Protocol § Internet Protocol (TCP/IP) If any components are missing, click on the Install…button to select the Client/Service/Protocol required. 3. After selecting the component you need, click Add…to install.
4. Select the network protocol you wish to add and click OK. This will return you to the Local Area Connections Properties window. 5. To allow your computer to be visible on the network, make sure you have checked off the File and Printer Sharing for Microsoft Networks. 6. When finished, you must restart your computer to complete the installation.
CONFIGURATION After successful installation of the Wireless LAN Card’ s driver, a Network Status icon will display in the task bar. You will be able to access the Configuration Utility through the Network Status icon. If the icon doesn’ t appear automatically, go to Start à Programs à 802.11g WLAN à 802.11g WLAN Utility, it will appear in the task bar. The Network Status Icon The Network Status Icon will display on the task bar of your desktop and show the current network connection status of your system.
Icon Link Status Connected to network Connecting Driver not loaded Disconnected from network Accessing the Configuration Utility The Configuration Utility is accessed by clicking on the Network Status Icon.
Main Tab The Main tab displays the current status of the Wireless Network Adapter. Item Description Status Displays the information about the status of the communication. The SSID is the unique name shared among all points in your wireless network. The name must be identical for all devices and points attempting to connect to the same network.
Item Description S ignal Displays the signal strength of the connection between the Wireless Network Adapter and the Access Point it connects to. A set of wireless stations is referred to as a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. BBS ID Current Configuration Pref. SSID It shows the current SSID setting of the Wireless Network Adapter. BSS Type Displays the type of Basic Service Set, Access Point or Peer to Peer.
Preferred SSID BSS Type Type in the SSID name of the device you want to connect. You can select Peer-to-Peer, Access Point or Auto Mode of the device you to connect. Tx Rate You can select the data rate or set to auto mode from the pull-down menu. Channel Select the channel depends on your country. Power Mode No Power Save :Select this function , the adapter will be in full active mode. Max Power Save :Select this function, the power save mode will be enabled. IBSS The 802.
Mixed Mode (If you choose this option the device will automatically convert the suitable standard ). Profile Enter the profile name and click the Save button to save your configuration, To open the profiles you saved, select the profile from the pull-down menu and then click the Load button. Fragment Threshold RTS Threshold Preamble To fragment MSDU or MMPDU into small sizes of frames for increasing the reliability of frame (The maximum value of 4096 means no fragmentation is needed) transmission.
Transmit Authentication Retry limits The power level function is used to extend communication distance. The authentication type defines configuration options for the sharing of wireless networks to verify identity and access privileges of roaming wireless network cards. You may choose between Open System, Shared Key, and Auto Switch. Open System: If the Access Point is using "Open System" authentication, then the wireless adapter will need to be set to the same authentication type.
Network WEP Configuration LEAP User Configure your WEP or LEAP settings: WEP (Wired Equivalent Privacy) is a data security mechanism based on a 40 Bit/128 Bit/256 Bit shared key algorithm. LEAP (Lightweight Extensible Authentication Protocol). It provides user-based, centralized authentication, as well as per-user wired equivalent privacy (WEP) session keys. To configure your WEP settings. WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network.
Advanced Tab The Advanced tab displays the current status of the Wireless Network Adapter. Security Tab Use the Security Tab to configure your WEP settings. WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network.
Network Configure your WEP or LEAP settings: WEP (Wired Equivalent Privacy) is a data security mechanism based on a 40 Bit/128 Bit/256 Bit shared key algorithm. LEAP (Lightweight Extensible Authentication Protocol). It provides user-based, centralized authentication, as well as per-user wired equivalent privacy (WEP) session keys. WEP Configuration Encryption 1-4 To configure your WEP settings. WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network.
Key size used in accessing the wireless network via WEP encryption. A key of 10 hexadecimal characters (0-9, A-F) is required if a 64-bit Key Length was selected. A key of 26 hexadecimal characters (0-9, A-F) is required if a 128-bit Key Length was selected. A key of 58 hexadecimal characters (0-9, A-F) is required if a 256-bit Key Length was selected. 40 Bit, 128 Bit or 256 Bit. LEAP User Network administers have been taking advantage of the simplified user and security administration that LEAP provides.
About Tab Click on the About tab to view basic version information about the OS Version, Utility Version, Driver Version, Firmware Version and EEPROM Version.
- 29 -
UNINSTALLATION In case you need to uninstall the Utility and driver, please refer to below steps. (As you uninstall the utility, the driver will be uninstalled as well.) 1. Go to Start à Programs à 802.11g WLAN à Uninstall 802.11g WLAN Utility. 2. Click OK to continue. 3. Select Yes, I want to restart my computer now, and then click Finish to complete the uninstalled procedure.
- 31 -