FCC REGULATORY STATEMENTS Parts, Class B This device complies with Part |5 of FCC rules. Operation is subject to the following two conditions: i. 2. This device may not cause harmful interface, and This device must accept any interface received, including interface that may cause undesired operation, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
INTRODUCTION The PCMCIA Ethernet card is » credit-card-size Type UH PCMCIA Ethernet adapter that complies with the PCMCIA 2.1 and IEEE 802.3 standards. It works with computers that incorporate a compatible interface. The drivers associated with this card allow you to use the most popular Network Operating System(NOSY in the PC environment very easily. The attached port integrating the connector in the card eliminates the need for dongles or external connectors.
INSTALLATION Hardware Connections 1. Insert the PCMCIA Ethernet cans into the PCMCIA got with the 68 pin connector towards your notebooks PCMCIA slot and the label facing up. 2. Connect one end of 2 Theme cable into the card's R145 | port. Plug the other end of the cable into a switch hub. Software Instillation Insert the driver diskette into the floppy drive and set the current drive to the floppy drive. Her run INSTALL to install the real mode drivers such as OD or DIS 2.
Wins 85 illustration Make sure that the drivers of PCMCIA slot are well installed. The System boon in the Control Panel van report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer, I. Insert PCMCIA Ethernet Card into PCMCIA slot. In New Hardware Found dialog box, select Driver from disk provided by hardware mamufacturer®. & Dipped from dk 1. Please input the path, 4% and insert driver diskette.
Insert the PC Can into the slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer. Windows will prompt a ADD NEW HARDWARE WIZARD dialog box, then press Next, 3 6 ‘host JEAN When Windows prompt you a ADD NE RE WIZARD dialog box, select Search for the best... and press Next. When the ADD NEW HARDWARE WIZARD dialog box.appears, select Floppy disk drives and insert driver diskette. Then press Next, the driver will be installed.
2. 3 Welcome to the Found New Hardware Wizard Thi wean bmx pens iol devices been Select Search for a suitable driver for my device (recommended). Click Next. ER Task al Hae pence Sonic Drivers: adhesion hv 1 8 wit wins prop are Shaka enables o hardware device tower ER 40 NS PAR. Tho wind wil commie: th rebellion bor lis shelving 2% Wan cackler 5 thin dives. melt $v makers 2 Borden rotational cock Herr, ea yous ward tow widowhood 20.
x a ins a gr net carryall yo 3 Histologist Bore vole iar toi rh Condones. Minolta's oko sissier Sasha Hit Ba wooliness has nol been shied taco § wore Aisha By MG SO. auto Mickey has rt don ago Shs actives on wank ko nosh FUME aot Lard £50 you verse rioter the stain? [Tar] de | wheels | Windows NT 4.0 f. Make sure that the Network Services already installed in the NT 4.0 system 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows NT 4.0 4. Open My Computer 5.
SPECIFICATIONS « IEEE BOS {basset * 10Mbps speed * Internal buffer memory, No system memory used * NE2000 compatible DDH client, Packet driver and INNS version 2.x, 3.x driver supported Due rating Environment Nov ell Wetware 3.x, 4.x Microsoft LAM Manager Packet Driver Applications Microsoft Windows (or Work groups 3.11, Windows 3.1 Microsoft Windows MT 3.51, NT 44 Windows 95 Windows 9% Windows 2000 Fantastic 6.