USER's MANUAL 10 / 100M Fast Ethernet PC Card (FE1500 Rev. C1) First Edition( July, 3, 1997) Document No.
INSTRUCTIONS MANUAL FEDERAL COMMUNICATIONS COMMISSION ‘ INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Lags B digital device, pursuant 1p Part 15 of the FCC Rules.
INTRODUCTION HARDWARE SOFTWARE IN, Nov ell Wetware MS LAN Manager Packet Driver. . Winds for Work groups 3.17 Windows ST 3.57. Windows NT 4 Windows 95 In, Artisan Inelastic 6.0 Installation TBM 0872 Warp. GENERAL INFORMATION. NOTES FOR IONS DRI VER. NOTES FOR PACKET DRIVER NOTES FOR WINDOWS £ OR WORK GROUPS DRIVER QUESTIONS AND ANSWERS, SPECIFICATIONS ABOUT THIS MANUAL Plus Sana! will explain how 10 install and use your 107100Mbps dual speeds Fast Ethernet PC Card.
production 100Buase-TX Fast Ethernet or erase Ethernet connectivity to your local area network. OPERATING ENVIRONMENTS « Nov ell Wetware 3.x, 4.x + Microsoft LAN Manager Packet Driver Applications Microsoft Windows for Work groups 3.11 Microsoft Windows 3.1 Microsoft Windows NT 2.51, NT 4.4 Windows 95 Fantastic 6.0 1M (5/2 Warp Version 3 CONTENTS IN THE PACKAGE » Fast Ethernet PC Card Adapter Media couplet with single RI-43 connector for ABASE-T and 100BASE-TX network. » 3.
Hardware Installation Removing the Dual Speed Fast Ethernet PC Card quite different for various computer | design. Please refer to the PC Cara removal instruction in the document for your notebook computer, Connecting and Removing the Cable of Media Couplet to the PC Cary Grasp the PC Card 15-ping connector at the eng of the media couplet with the Pointing triangle facing upward, Gently insert it ute the mating connector on the BC Card unit 1 clicks in page at both sides.
SOFTWARE INSTALLATION Plug the driver diskette anti the floppy drive and set the current drive to the floppy drive. Then run INSTALL vo install the tear mode drivers such ag ODI or NDS 2.x or Packer Drivers inch the target disk. Nov ell Wetware There are two methods © stall the Wetware client ODT driver, the menu installation ang Wetware 3.42 or 4.x Client installation Menu Installation 1.Run INSTALL EXE farm the root directory of driver diskette, I Software Installation ) 2.Select Wetware ER and 4.
Software installation } SF Answer accordingly and provide a path if necessary, 6. The program displays the following: Configure your workstation for backup by a Net Ware server cunning software such as BACKUP? austerer discerningly and provide a path if I Ty. &Sleet a driver for your network board. 2. From the driver list, select Other Drivers. 10.Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside.
check and modify the PROTOCOL INT file for LAN Manager. 2 Run INSTALLER from too directory of driver diskette, 3 Select Microsoft LAN Manager item on the menu serene, aft ware installation 4.1 current Settings are acceptable, select Start installation” and go 1 step 6. Otherwise, select Modify Parameters” to make skiing changed. S.
Software instant Packet Driver 4. Run INSTALLMENT from root directory of driver diskette. 2.Select Packet Driver item on the menu Scented. JI current settings are acceptable, select Start Installation and go to step 5. Otherwise, select Modify Parameters” to make setting changed. 4. Move SARS to focus on the field you want {a make a change and press to select z fit value. When the configuration are set completely, press banter on the GK field ta exit the screen and go back to step 3, F.
Software installation _software installation 12.Move cursor to focus on the sifting you want to make a change and press " {0 select 8 fit value, When the configuration is accepted, press on the OK” field 10 exit the censor and go back to step 11, 13 elect DIS Serviceman Manager...” as the network server you will attach tp and press key. £4 Installation program starts to copy related file to the destination directory and modifies AUTOCRATIC and under user symbol 146 \f “Parisian BT" a
Software installation 15 Please reboot the computer to have the driver take effect. ODI River for Work groups 1 Run Windows fer Work groups and click “Network Setup” icon in Network group. 2In Newark Sep dialog box, slick “Networks” Mutton te select the network operating system. 3In Networks dialog box, check Install Microsoft Windows Network and Others, thereafter select novella Net Ware (Workstation Sheol, 3.X) or Nov ell Net Ware it hove) and press OK to (Workstation 4.
Software installation 2.1In Network Settings dialog box, push Add Adapter...” button. The Add Network Adapter dialog box will appear. J. Chonse requires disk from manufacturer” from the network adapter card list and press Continue,” 4. When Windows NT prompts for manufacturer disk, insert driver diskette and press OK until the Network Setting Change dialog box appears, 5 Restart now to have the card take effect, Windows NT 4.0 Assumed that the Network Services already installed in the NT 4.0 system.
Software installation New Hardware Found 6 pin dik Erg Edi 3.Please input the path, 43 and insert driver diskette. Th driver will be installed and you may be asked for the original Windows 95 Caddish 4.For the first time installation, please click Newark con in Control Panel to add Protocols, Client and Service if you needed 5.Reboot the machine and the card will be fully functional Artistic Fantastic 6.0 Installation Install FANTASTIC 6.0 fest, 2 Ren INSTALLER from woo directory of driver diskette.
Software installation A. Enable PCMCIA Service of 08/2 Warp 1.In the OS2 Desktop group, double-click on the (8/2 System icon. on the System Setup icon, Double-click on the Selective Install icon. 4 Select the PCMCIA Supper button, electable PCMCIA system, For example : select IBM Think Pad 750 6 Click OK" Click gestalt #.Select the source drive and directory For Example AFTERIMAGE 9.Click Just all F6. Chick OK B. Install KINDS driver for IBM LAN Server 4.
Software installation ~ For example : select IBM Think Pad 750 6.Click OK, cheek Install &.Select the source drive and directory For Example DIMAGGIO 9.Click Fastball 18.Click OK B. Install Wetware Request Z Insert diskette labeled FSO82 1 to diskette drive A: 2. Change current drive fo 40 3. Run INSTALL EXE 4 Select Installation Select Requester an workstation... 6.5et Target Directory Assume WETWARE 7.Click OK" &.elect Edit CONFIGURATIONS and Copy Al Files... 9.Click OK I0.
General Information GENERAL. INFORMATION NOTES FOR DIS DRIVER The following are examples of parts CONFIGURATIONS file and AUTOCRATIC for loading Systematic Card Services and INDIES driver: CACARDSOFTCSALLOC INT DEVICE=CNCARDSOF DARING EXE devices: airman doddriversiathernetie 160M amen. exe device danmandosidriversipromaen, dos fellowman dos.
General Information QUESTIONS AND ANSWERS This chapter provides a number of examples of Questions (Cr), Causes , and Answers {AL If your LAN is not functioning properly, look up the problem te, or ask your dealer for technical assistance Q:The Card Service cannot enable my card, Whee I run LANE the error message show Fail to enable PC card C:No memory space to map the attribute memory of PCMCIA card. Af memory management software og.
General Information 2.Edit the CARDIE INI file and add the library LEI00.CLB. Edit CACARDSOFINCARDIDLINI Find the section which starts and add the line before auy either "Cardboard" lines. When the card is inserted it will beep, Use CARD INFO /V io check if the card has been configured correctly. 3If the card cannot work properly, you may edit CARDINAL again 10 change the resources pacification.
Information Insert the PC Card inch any one of the slots, molecule PCM.EXE that supported by Phoenix PCM 3. Sclect the right socket by Page Up, Page Dawn key ) on 4.Choose Configure item by ALT-C. 5.Choose Add Card to List tem and Butler for first tine or choose Edit Con fig Parameters for further edition &.Set the 1 range and IR for the card 7 Press Enter key and then save the configuration .
General malformation Q:The ODI driver is run successfully but fail to login to the Wetware server : C:Frame type compatible with server or Interrupt miss match, Al. The deficit frame type for Wetware 3.11 and before is 862.3 but it is changed ie 802.2 in Wetware 4.x and 3.12. You mingy cheek the content of NETTING 10 see if the frame type is acceptable by the server.