ET-UW100 802.11n/b/g compliant 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
Table of Contents Chapter 1: Introduction 5 5 5 5 5 Package Contents How it works System requirements Appearance 5 ET-UW100 Image 6 7 8 9 9 10 11 11 12 12 12 12 Start using Chapter 2: Utility control Utility Form Simple control Update FW Network Setting IP Setting Wireless Setting WiFi Status Refresh Button Save button Close Button -3-
Chapter 1: Introduction Package Contents The following items should be included: z z 1pcs ET-UW100 1pcs User manual If any of the above items are damaged or missing, please contact your dealer immediately. Notice: Abocom has the right to exchange the design of package and include items without inform the users. System requirements OS: Windows XP SP2 with administrator privilege. Windows Vista, Windows 7. CPU: Intel Pentium M 1.7Ghz (2005) is workable at 5 frames per second.
Appearance 1 [ ET-UW100 ] 2 Item Part Description 1 LED Blue LED, indicate the activity signal. 2 USB slot Connector to your NB and PC , support USB2.0 , downward fit USB 1.
Start Using 1. Confirm your NB / PC already power on and work normally. 2. Plug in the ET-UW100 to your NB. (don’t plug-in before Windows start) Please pay patient to await the NB desktop screen to reveal on the projector or LCD TV which user decided.
Chapter 2: Utility Control ET-UW100 When user plug-in the ET-UW100 to NB or PC, and collocate with ET-UW100_tool_lite.exe It will show the Utility.
Utility form: 1 2 3 Item 4 5 Part Description 1 Control Window Main Control Window 2 Virtual CD-ROM Device Show the Virtual CD-ROM location 3 Search Search AP in environment 4 Update FW Update ET-UW100 and VB202 FW 5 Network setting User’s desktop screen resolution 6 Close Close the main Window.
Simple control Update FW : To choice what the FW need be update, and use the “Browse” button to find the correct file path.
Network setting : User could manual the Wireless setting; include the security, searching function in this page.
IP setting: z z Mode: ET-UW100 provide three modes for user choice. STATIC / DHCP / Auto IP. IP address: User could manual key-in the IP address. z z z z Net mask: User could manual key-in the Net mask address. Gateway: User could manual key-in the Gateway address. MAC address: It is factory default value. Un-changeable. Master DNS: User could manual key-in the Master DNS address. z z z z Slave DNS: User could manual key-in the Slave DNS address. Current IP: It is factory default value. Un-changeable.
WiFi Status: This block will reveal the current WiFi status of ET-UW100 (Unchangeable). The reveal items include: z z z z WiFi Channel SSID RSSI value SNR Value z z z z z TX OK packet quantity. TX Error packet quantity. RX OK packet quantity. RX Error packet quantity. One Collision value. z z More Collisions value. TX Rate value Refresh Button: User could use this button to side-survey the wireless AP around the range of ET-UW100 availability searching performance.
REV.
