Abocom Systems, Inc. CA1522M Camera Setting Instructions (Android) [Introduction] This file will show you how to use the “P2PCamLive” app of the phone, and environment architecture chart of the “CA1522M”. [Install] For the first time, please download “P2PCamLive” app and install. Click Install, this app will be installed to your phone. [Connect to CA1522M] Users have 3 ways to connect to CA1522M, and then there are 3 ways to connect P2PCamLive app and use. 1.
Users use Wi-Fi direct link CA1522M. (The default SSID is “CA1522M-24”, default password is “12345678”.) As shown, users using Wi-Fi direct link CA1522M, and then there are 3 ways to connect P2PCamLive app. Search default SSID “CA1522M-24”, and the default password is “12345678”.
Confirm the connection status, this status shows “Connected”. 2. Internet-WPS Link Users using the AP-Router connected by WPS on CA1522M, and then using the phone Wi-Fi (or Internet) link to this AP-Router, so will be able to complete. As shown, users using the AP-Router connected by WPS on CA1522M, and then there are 3 ways to connect P2PCamLive app.
As shown, users pressed the WPS-button (over 2 seconds) to create a link with the AP-Router. After creating the link, you will see a link to the information on the AP-Router screen.
As shown, you can use the phone Wi-Fi (or Internet) connected to the AP-Router, then connect CA1522M. 3. Internet -Ethernet Link Users using the AP-Router connected by Ethernet on CA1522M, and then using the phone Wi-Fi (or Internet) link to this AP-Router, so will be able to complete.
CA1522M, and then there are 3 ways to connect P2PCamLive app. After creating the link, you will see a link to the information on the AP-Router screen. As shown, you can use the phone Wi-Fi (or Internet) connected to the AP-Router, then connect CA1522M. [Add Camera and Setting] When completed confirmation link CA1522M, and then open P2PCamLive app main screen, then select the “click here to add cameras” to enter the editing screen, and there are 3 ways to connect and use.
Open P2PCamLive app, then enter the main screen I. Key-in UID Please key-in a corresponding UID.
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
As shown, you can find out the video captured by the camera. II. QR Code Please scan the QR Code, and confirm whether an error.
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
As shown, you can find out the video captured by the camera. III. LAN Search Select LAN Search. And confirm UID number is 20 yards, selected after confirmation.
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
As shown, you can find out the video captured by the camera.
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.