User's Manual

Foldable Bluetooth

Stereo Headset

User Guide

Plug the optional Bluetooth USB Audio Adapter

to a free USB port on your

computer.

Note:

1. The optional Bluetooth

USB Audio Adapter supports only Windows

2000 and XP.

2. With the optional Bluetooth USB Audio

Adapter, this headset is designed to work out

of box without configuration. If you are using

other Bluetooth adapter, you may need to

manually configure the Bluetooth Stereo

Headset. Refer to your Bluetooth adapter’s

user manual for details regarding the driver

installation.

Turn on your Bluetooth Stereo Headset and wear it.

You can now enjoy music from your computer.

Outlook and Parts Names

Trouble Shootin

If you cannot hear music played from your computer,

please do the followings.

1. Make sure the power LED on the headphone glows. If

not, replace the battery with new ones.

2. Make sure the Link LED flashes. If not, it means your

Bluetooth Stereo Headset is NOT connected to the

Bluetooth adapter as it should be. In this case, unplug

your Bluetooth adapter. Power off your Bluetooth

Stereo Headset. Repeat the installation steps .

3. For Windows 2000: Go to Start Control Panel

Sounds and Multimedia Audio. Make sure that

Bluetooth Audio is selected for the Preferred device

of Sound Playback.

For Windows XP: Go to Start Control Panel

Sound, speech, and Audio DevicesSound and

Audio Devices. Make sure that Zeevo Audio Dongle

is selected for the Default device of Sound playback.

Installation

PAGE 1
Foldable Bluetooth Stereo Headset Outlook and Parts Names User Guide Trouble Shooting If you cannot hear music played from your computer, please do the followings. 1. Make sure the power LED on the headphone glows. If not, replace the battery with new ones. 2. Make sure the Link LED flashes. If not, it means your Bluetooth Stereo Headset is NOT connected to the Bluetooth adapter as it should be. In this case, unplug your Bluetooth adapter. Power off your Bluetooth Stereo Headset.
PAGE 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.