User's Manual

ManualsBrandsAbocom Systems ManualsElectronicsBluetooth Audio Adapter

1—Check the package contents

2—Charge the battery

3—Turn on the power

4—Pair (make connection) with receiver

Unpack the Bluetooth A/V Transmitter and

check that the following items are included:

The battery lasts eight hours and is re-

charged using the power adapter or the

USB cable.

To recharge:

Plug the USB cable

into the DC jack on

the Bluetooth A/V Transmitter and connect

the other end to your PC.

Plug the power adapter

into the DC jack

on the Bluetooth A/V Transmitter and con-

nect the other end to an electrical outlet.

To turn on the power

, press and hold the

power button until the power LED lights blue.

To turn off the power

, press and hold the

power button until the power LED turns off.

The Bluetooth A/V Transmitter can be used

with a bluetooth headset or receiver. On ﬁ rst

use, the devices must be paired.

To pair the devices.

1. Connect the audio cable to the audio in

jack on the Bluetooth A/V Transmitter.

2. Connect the other end to the audio out

jack on your MP3 player.

Blue LED

power is on

Blue ﬂ ashing LED

connected to device

Red LED

battery is charging, turns off

when charged

Red ﬂ ashing LED

battery is low, recharge

before LED turns off

Power button

Charge

status LED

Power/link LED

DC jack

Audio in

Recharging takes 90 minutes.

Bluetooth A/V Transmitter

USB Cable

Audio Cable

Quick Guide

Power Adapter

Summary of content (3 pages)

PAGE 1
—Check the package contents 3—Turn on the power Unpack the Bluetooth A/V Transmitter and check that the following items are included: To turn on the power, press and hold the power button until the power LED lights blue. To turn off the power, press and hold the power button until the power LED turns off.
PAGE 2
5—Connecting with a receiver (cont.) 3. Turn on the power on your headset. 7—Using other devices The Bluetooth A/V Transmitter can be used with the following devices: • Headsets • Receivers/speakers Troubleshooting If the Bluetooth A/V Transmitter does not work, try the following: - Ensure connecting devices are charged - Turn off all devices and then turn them on in the order shown in this guide - Ensure devices are within the 10-meter range 4. Turn on the power on the Bluetooth A/V Transmitter.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.