User's Manual

LAN
Use standard LAN cables (RJ45
connectors) to connect your PCs to
this port. If required, any port can
be connected to other hub. Any
LAN port will automatically function
as an “Uplink” port when necessary.
WAN
1. Connect a 24V PoE switch to
get power with RJ45 cable.
2. Connect the ADSL or Cable
Modem to a PoE switch to get
Internet connection. If your
modem came with a cable, use
the supplied cabled, otherwise,
use a standard LAN cable.
Quick Install Guide
AOP7120 Super WiFi CPE/AP
1
Hardware Overview
Hardware Connection
2
Step1. Connect to your local area network:
connect the Ethernet cable to LAN
port of the device, and the other end
to a PC, hub, switch, router or other
Wireless Access Point.
Step2. Power on the device: power on the
device by PoE switch via WAN port.
Step3. Check the LEDs: the power LED
should be always on when system is
ready.
Login
Software Configuration
3
Wireless_2.4G
DefaultSSID: OpenWRT2G
Security: none
1. Start your computer and make sure the
connection by an Ethernet cable between
your computer and the Wireless Router.
2. Start your WEB Browser.
3. In the Address box, enter the IP address:
192.168.1.1
4. Login User Name “admin” and Password
“password”