Use Instructions

ManualsBrandsABLOY ManualsElectronicsElectromechanical padlock

14.1.2020 Rev.1

PLK/A1

Instructions for use

An ASSA ABLOY Group brand

Color Basic purpose

GREEN Indicates success

RED Indicates failure

WHITE Awake and not connected

BLUE Awake and connected

Function Color Indication

Wakeup, not connected WHITE Lit for 1 second

Wakeup, connected BLUE Lit for 1 second

Awake, not connected WHITE Blinking with 50ms on 950ms off cycle

Awake, connected BLUE Blinking with 50ms on 950ms off cycle

Battery poor RED Additional blink for 50ms after awake indication

Motor drive success (access granted) GREEN Lit for 2 seconds

Motor drive fail (access granted) RED Lit for 2 seconds

Going to sleep WHITE Blinking with 50ms on 150ms off for 1 second

The specs

Certiﬁcations

Lock and unlock the

padlock a couple of

times so the ﬁrmware

checks the new battery

status.

2,5 mm

LED indiations

Changing the battery

123

4 5

• Shackle diameter: 10 mm

• Security grading: EN 16864:2017 11440D34

classiﬁcation

• Battery types:

For cold environment: Panasonic CR2

For warm environment: Saft LS14250 (use adapter)

CAUTION Risk of explosion if the battery is replaced by

an incorrect type

• Battery life: 5 years / 5000 openings

• O

perating temperature: -25 +60

• Compatibility: Android devices with BT 4.0 and Android

version 4.4 or newer

• The USB-C port is for service use only. If the battery is

completely discharged, use the USB power bank

(5Vdc 500mA) as backup power.

3 mm

FCC ID: 2AI5J-PLKA1

Summary of content (2 pages)

PAGE 1
PLK/A1 Instructions for use Certifications FCC ID: 2AI5J-PLKA1 The specs • • • Shackle diameter: 10 mm Security grading: EN 16864:2017 11440D34 classification Battery types: For cold environment: Panasonic CR2 For warm environment: Saft LS14250 (use adapter) CAUTION Risk of explosion if the battery is replaced by an incorrect type • • • • Battery life: 5 years / 5000 openings Operating temperature: -25 +60 Compatibility: Android devices with BT 4.0 and Android version 4.
PAGE 2
Backup power USB-C Compliance information EU EC DECLARATION OF CONFORMITY (DoC) Abloy Oy (PO BOX 108, FI-80101 JOENSUU, FINLAND) declare under our sole of responsibility that the ABLOY PLK/A1 fulfills the directive RE 2014/53/EU as follows: Standards: EN 62368-1:2014 (2.ed), EN 60950-22:2006/AC:2008, EN 301 489-01:V2.2.3, EN 301 489-17:V3.2.2, EN 300 328 v2.2.2 EN IEC 61000-6-2:2019, EN 61000-6-3:2007 + A1:2011 Joensuu xx.xx.