User's Manual

iTripAuxBluetooth

OperatingInstruction

‐ PlugtheiTripintoyourcar’s12Vpowersocket

‐ UsethesuppliedaudiocabletoconnectyouriTrip’saudiojacktotheAUX
INjackofyourcarstereo.

‐ ThefirsttimeyouusetheiTripwithanyBluetoothdevice,youmustpair
themtoeachother.OncetheiTripispoweron,itwillenterthepairing
modeandtheblueLEDwillblinkrapidly.

‐ OpenthesettingmenuoftheBluetoothdeviceandpairyourdevicewith
theiTrip.

‐ OncetheITripispairedsuccessfullywithyourBluetoothdevice,theblue
lightwillturnsolid.

‐ Afterthefirsttimeuse,theITripwillreconnecttothelastpaireddevice
automaticallywhenitispoweron.IftheITripcannotfindthelastpaired
device,itwillenterthepairingmodeandyoucanpairwithanother
Bluetoothdevice.

‐ WhentheITripisconnectedwithaBluetoothdevice,youcanpressthe
buttontodisconnectfromtheBluetoothdeviceandtheITripwillenter
thepairingmode.ThiswayyoucanpairtheITripwithanotherBluetooth
deviceifyouwant.

‐ TheiTripwillgointosleepmodeifthereisnopairingactionwithin3
minuts.TheblueLEDwillturnoffinsleepmode.

‐ WhentheITripisinpairingmodeorsleepmode,pressthebuttonandthe
ITripwillenterreconnectmodeagain.


FCCstatement:
THISDEVICECOMPLIESWITHPART15OFTHEFCCRULES.OPERATIONIS
SUBJECTTOTHEFOLLOWINGTWOCONDITIONS:(1)THISDEVICEMAYNOT
CAUSEHARMFULINTERFERENCE,AND(2)THISDEVICEMUSTACCEPTANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCETHATMAYCAUSE
UNDESIREDOPERATION.

NOTE:THEGRANTEEISNOTRESPONSIBLEFORANYCHANGESOR
MODIFICATIONSNOTEXPRESSLYAPPROVEDBYTHEPARTYRESPONSIBLE
FORCOMPLIANCE.SUCHMODIFICATIONSCOULDVOIDTHEUSER’S
AUTHORITYTOOPERATETHEEQUIPMENT.
