Specifications
SMS Commands
1. Location Link
Text: URL#
Response a Google map link
2. Properties
Text: QP#
Respond: IMEI#, APN, IP, GSM, GPS, Battery Life
BAT 3.8-4.2 (low to high)
3. Restore Factory Setting
Text: RFS#
4. Setup Center Number
Text: CENTER,000000,phone number#
Delete Center Number
Text: CENTER,000000,0#
5. Vibration Alarm
Text: VA,ON# (on)
Text: VA,OFF# (off)
*Default Setting: Off
6. Over-speed Alarm
Text: OS,100# (on)
Text: OS,OFF# (off)
*Default Setting: Off
*Default Alarm Speed: 100km/h
Working Mode
1. SMS+GPRS Mode
Text: WKMD,0#20#
(The tracker will update its location to the server every 20 seconds)
Respond: WKMD,0 OK
Time Gap: 20.30.40.50.60.70.80.90.100.110.120
(Default Setting 60
seconds)
You can view location via SMS, APP, WEB platform simultaneously.
2. SMS Only Mode
Text: WKMD,1#
Respond: WKMD,1 OK
You can only view location by sending SMS command URL#, please send
command to set it to SMS+GRPS Mode when you need to track through
APP and WEB platform.
3. Sleep Mode (Long Standby Mode to Save Battery)
Text: WKMD,2#
Respond: WKMD,2 OK
The tracker stops working under this Long Standby Mode. Resend the
command to set it to SMS+GPRS Mode or SMS Only Mode when you
need to track.
SAR
The radiated output power of this device is below the FCC radio frequency
exposure limits. Nevertheless, the device should be used in such a manner
that the potential for human contact is minimized during normal operation.
The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output. To avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the antenna should
be minimized.For body worn operation, this device has been tested and
meets the FCC RF exposure.
GEO-Fence
For data mode and setting online on ABLEGRID website gps.ablegrid.com
For simple in or out Geo-Fence, you can just use mobile APP as well.
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that maycause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
-:-:-:2:+-69:XGIQKX
9KZ[VGTJ/TYZGRRGZOUT-[OJK<KX
GT-100 GT-200 GT-300
TPT
Thank you for choosing ABLEGRID. Please read the manual before use
and save it for future reference.
For more information, please visit www.ablegrid.com to get live-chat tech
support or visit our forum at forum.ablegrid.com
Please fully charge the device around 3 hours before you use it.
Size
GT-100 LTE GPS Tracker: 77mm x 26mm x 48mm
GT-200 LTE GPS Tracker: 77mm x 38mm x 48mm
GT-300 LTE GPS Tracker: 96mm x 29mm x 61mm
Specifications
LTE Band:
LTE FDD B2 B4 B12 UMTS/HSPA+ B2
GPRS: Class12, TCP/IP
Working Voltage: 3.4-4.2V DC
Working Temperature:
-20ć~+70ć
Working Humidity:
20%~80%RH
GPS Sensitivity:
-108dB
Waterproof:
IP64
Battery Capacity
GT-100 LTE GPS Tracker: 3400mAh
GT-200 LTE GPS Tracker: 6800mAh
GT-300 LTE GPS Tracker:
10000mAh
1 2 3
7 8 9 10
1211
Step 1 Activate SIM Card
1. Please visit www.ablegrid.com, click “ Simcard Activation”
GT-100 LTE GPS Tracker GT-200 LTE GPS Tracker GT-300 LTE GPS Tracker
3. Please check both your inbox and spam to get the password to access
to your account.
4. Click “GPS Tracker List” to add your tracker. Choose the correct model
of your tracker, input the name and IMEI#. You can get the IMEI# on the
bottom of the tracker, starts with 35, then click “Add”.
5.
Congratulations! You have added the tracker to your account successfully.
Please enjoy your time with ABLEGRID GPS tracker.
You can also track with full features through our website gps.ablegrid.com
with the same username and the password.
2. Input SIM Card IMEI#, starts with 89, you can find it on the back of the
SIM card (digits only, letters not included)
Caution
1. Keep away from the fire source and heat.
2. Water resistant IP64, cannot be used under water.
3. You must accept ABLEGRID End-User-Agreement, for the detailed
agreement, please visit www.ablegrid.com.
Simcard Activation
Option B Create Management Account on PC or Laptop
1. Please visit reg.ablegrid.com, input your E-mail address to create your
account.
2. GPS Tracker Registration Login
Please check both your inbox and spam to get the password.
3. Add the Tracker to Your Account
Please note the GPS Tracker IMEI# is on the bottom of the device, starts
with 35. The SIM card IMEI# starts with 89, you can find it on the back of
the SIM card.
4. Congratulations! You have created your account and added the tracker
to your account successfully.
5.
Search “
AbleGrid GPS Tracker
” on Apple APP Store or Google Play Store
and install
the APP, login with your registered account, then you can track
and view on ABLEGRID APP.
6
Charging
Fully Charged
Step 3. Create Management Account
Option A Create Management Account on Cellphones
（Strongly Recommend）
1.
Search “AbleGrid GPS Tracker” on your cellphone Apple APP Store or Google
Play Store and install the APP. Open the APP and hit “Register” on the top right.
2. Input your E-mail address, full name and your cellphone number to create
your account.
g
ed
a
te Mana
g
ement Ac
c
2. Charging
4
3. Choose Subscription Plan, Confirm Your E-mail Address
4. Receive Notification E-mail with SIM Card Phone Number
Your Tracking Plan:
Your SIM Card Phone Number:
Cost:
Step 2 Insert SIM Card
1. Device is Powered On by Inserting the SIM Card A T-mobile SIM card is
pre-installed, please use your finger nail to press it to fit in.
LED Indicator:
Searching LTE Network
Searching GPS Signal
Ready to Use
1 2
L
ED In
d
i
ca
t
o
r:
Searching LTE Networ
2