Integration Instructions

ManualsBrandsABITRON Control Systems ManualsElectronicsRF module

Table Of Contents

Technical

Documentation

RF Transceiver Transmitter

CSxxxTRT-1-1

with Feedback Function

KH62400061.A, K500267 &

KH66983xxx61.A, K750172

Version

Datum

Name

Kommentar

1.00

25.03.2015

ORD

CS447 hinzugefügt; 04.5 und 09 nachgearbeitet

1.00

15.04.2015

ORD

10 Fertigung aktualisiert; CS335 hinzugefügt

1.00

05.05.2015

FRM

9:Firmwareversionen STD302N-R & 04.5.2 geändert

1.00

22.06.2015

FRM

9:Firmwareversionen STD302N-R (335, 429 &447)

geändert

1.00

06.10.2015

FRM

04.5.x: FCC & IC Zulassungsnummern hinzugefügt

09.1: SW1 geändert

1.00

16.11.2015

FRM

04.5.3: Frequenz Kanal 20&21 getauscht.

1.00

17.11.2015

FRM

04.5.3: Frequenz & Kanäle 20 & 21 angepasst.

04.5.10: Gruppe 5-8 geändert.

1.00

21.01.2016

FRM

04.5.1: Frequenzliste geändert

1.00

19.05.2016

KÖM

Generelle Überarbeitung

1.00

04.11.2016

KÖM

Überarbeitung im Zug der Umstellung auf STD-302-S

1.00

15.03.2017

KÖM

10.1.1: Zusatzinfo für Verguss ergänzt

1.00

11.04.2017

KÖM

04.5 und 05.4: Zulassungen aktualisiert

1.00

25.07.2019

04.5.11 CS456 hinzugefügt;

1.00

03.12.2019

Integration Instructions

ABITRON Control Systems GmbH

Wiesnerstraße 20

A-4950 Altheim

Summary of content (10 pages)

PAGE 1
Technical Documentation RF Transceiver Transmitter CSxxxTRT-1-1 with Feedback Function KH62400061.A, K500267 & KH66983xxx61.A, K750172 Version 1.00 1.00 1.00 1.00 Datum 25.03.2015 15.04.2015 05.05.2015 22.06.2015 Name ORD ORD FRM FRM 1.00 06.10.2015 FRM 1.00 1.00 16.11.2015 17.11.2015 FRM FRM 1.00 1.00 1.00 1.00 1.00 1.00 1.00 21.01.2016 19.05.2016 04.11.2016 15.03.2017 11.04.2017 25.07.2019 03.12.2019 FRM KÖM KÖM KÖM KÖM MK KL Kommentar CS447 hinzugefügt; 04.
PAGE 2
01 Description The CSxxxTRT-1-1 RF part is a transceiver with multiple functions: 1. Transmitting or Receiving (simplex or halfduplex) 2. “Feedback Master” or “-Slave” for 3 LED-Feedback (halfduplex). The functions are selectable by SIP-Switch for frequency allocations and solder jumper to select Transmitter/Receiver, FB-Master or FB-Slave. The TRT (CSxxxTRT-1-1) has four holes to be mounted on screw bosses or it is mounted in module slots in transmitter housings.
PAGE 3
02 Block Diagram Name: Datum: erstellt: geändert: ORD 02.02.2015 MK 25.07.2019 HF Transceiver Sender CSxxxTRT-1-1 mit Rückmelde-Funktion Art.-Nr.: KH66983xxx61.
PAGE 4
03 Technical Data Supply voltage: Current consumption: 3,4-12 VDC (recommended 3.4-5VDC) <50 mA TTL Data (Open drain with 4.7K pull up) DK-Sync (Open drain with 4.7K pull up) Telegram-Off (Open drain with 10K pull up) 3xIO, LEDs can be connected directly Antenna (use 50 Ohm antenna) 3xIO can be used as Inputs, Level 0 / 5V (higher values possible with additional series resistor).
PAGE 5
04 Connection 04.1 Standard Connection 04.2 Modes 04.2.1 Connection as Transmitter or Receiver 0V/GND offen/open/High J1, J2 & J3 = open J1, J2 & J3 = open CSxxxTRT-1 as transmitter CSxxxTRT-1 as Receiver To change the frequency via a button connected to the decrement input of the TRT module, press this button for at least 2 seconds! Name: Datum: erstellt: geändert: ORD 02.02.2015 MK 25.07.2019 HF Transceiver Sender CSxxxTRT-1-1 mit Rückmelde-Funktion Art.-Nr.: KH66983xxx61.
PAGE 6
04.2.2 Connection as Feedback Master (Control Side) Set the coder Baudrate to 4800 if the TRT is used as feedback master or slave! J1 = closed J2 & J3 = open 04.2.3 Connection as Feedback Slave (Machine Side) J1 & J2 = closed J3 = open Name: Datum: erstellt: geändert: ORD 02.02.2015 MK 25.07.2019 HF Transceiver Sender CSxxxTRT-1-1 mit Rückmelde-Funktion Art.-Nr.: KH66983xxx61.
PAGE 7
04.3 Jumper Setting J1 Open Closed Closed J2 Open Open Closed J3 Open Open Open Function Normal FB-Master FB-Slave Standard Setting = grey background J3 = reserved Close J1, J2 & J3 for Test mode. 04.4 Application Note 04.4.1 FCC/IC If the used RF part has a FCC/IC certification the certification number has to be written on the outside of the device. Beware: Any modification of the RF part can void the certification! Name: Datum: erstellt: geändert: ORD 02.02.2015 MK 25.07.
PAGE 8
04.5.11 CS456TRT-1 Firmware-Version: CS456TRT-1K2_190723 Manual Setting S1=0 D2 D3 D4 D5 D6 Freq.
PAGE 9
05 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules Part 90 2.3 Specific operational use conditions This module is approved for use in portable and mobile applications. Integrators must supply operating instructions for end users and installers to satisfy RF exposure compliance requirements are met. Integrators and installers must also make sure that compliance with Part 15B are ensured. 2.
PAGE 10
2.8 Label and compliance information The 456TR1 module is labelled with its own FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a physical label or eLabel referring to the enclosed module. In that case the end product must be labelled in a visible area with the following: Contains FCC ID: 2AC8P-456TR1. Name: Datum: erstellt: geändert: ORD 02.02.2015 MK 25.07.