Wireless Motion Sensor User’s Manual Contents 1
Start to use – setting Wi-Fi (1) To turn on the wireless motion (2) Click the "Start Setting Device" (3) First switch the device to the setting (4) After returning from the Wi-Fi sensor for the first time, you need button below and click the “OK” mode, press and hold the reset page, select the Wi-Fi ID from setting the Wi-Fi environment button in the dialog box to enter button of the wireless motion sensor the network list and enter the the Wi-Fi page system. for 3 seconds.
Instructions a (2) The wireless motion sensor can be (3) Connect the wireless motion sensor (4) After the wireless motion sensor computer or mobile device and use placed in static spaces such as to the power supply and turn it on receives the human body signal, the the bedroom, study, and living room.
Placement Sensor installation location Within 180 cm from the ground or within 50 cm from the bottom of the bed, and the distance from the detection target must be at least 10 cm. The wireless motion sensor detects the activity status of the application area, and the information after sensing is collected by the cloud server. Users can download personal report from time to time to understand the daily schedule. Personal reports can be used for health care management in daily life.
etc. Report Rate function 2.5 / 5 / 10 / 30 / 60 sec Collect motion signals wirelessly weight 187 g size (length x height x width) 120 x 36.6 x 80 mm Power Supply 5V/2A USB adapter Power supply interface Micro USB Wireless Data connection method Wi-Fi / IEEE 802.
Precautions This product is not a medical device, it is only used for the health management of daily life. It cannot be used for medical purposes. If it is used in the medical field, the company will not be responsible for personal injury or product damage. FCC warning This device complies with part 15 of the FCC Rules.
LED indicator status significance Processing steps Flashing red Normal connection, no Vital signal Contact customer service staff to replace the device. Constant red light Abnormal connection Step 1 : Confirm whether the Wi-Fi signal is normal Step 2 : Restart Step 3 : Try to reconnect Wi-Fi. Step 4 : If the red light is still on, please contact customer service. Step 1 : Wait for 5 minutes to update (depending on network conditions).
