2020 Alltraq UWB LRT Modular Radio Manual Device Name: UWB Radio
Copyright Statement © 2020 ABG Tag and Traq, Inc. All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder. For permission, contact: ABG Tag and Traq, Inc. 1507 Capital Ave, Suite 101 Plano, TX 75074 Phone: 903-316-7417 Contact form: http://www.americanbiomedicalgroup.
This page intentionally left blank. ©2020 ABG Tag and Traq, Inc. ABG Tag and Traq reserve the right to change this manual and its contents without notice.
Table of Contents Copyright Statement...................................................................... Error! Bookmark not defined. Regulatory and Compliance Information .....................................................................................5 FCC Compliance .........................................................................................................................5 Department of Communications—Canada.............................................................................
Regulatory and Compliance Information FCC Compliance FCC Certification number: 2AAXVLRTNTMOD1 Manufacturer: ABG Tag and Traq, Inc. 510 E. Memorial Road, Suite B-1 Oklahoma City, OK 73114 USA This device complies with Part 15 rules of FCC Rules and Industry Canada licenses-exempt RSS Standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Department of Communications—Canada Certification number: 11400A-LRTNTMOD1 PMN: UWB Radio Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada.
Module Operation and Use Overview The primary use of the module is to provide active RFID location capabilities to a battery powered device. The module is intended to be soldered on to a device’s circuit board. The modules will not be sold without the accompanying circuit board with controller circuit. The modules are capable of ranging to each other to within 1 foot of accuracy. The UWB module is a self-regulated device that accepts a 2.8V to 3.6V range.
Requirements for the Host Device The host device and all the separately certified modules it contains jointly meet the RF exposure compliance requirements of RSS-102, if applicable. The host device shall be properly labeled to identify the modules within the host device.
Requirements for hand-held UWB System. This module is primarily hand-held and may operate indoors or outdoors; its operation is limited under the provisions of section 15.519. The UWB transmitter operates as part of a system in which it sends short duration UWB packets to one or more receivers.
Warranty Information The Customer shall carry out a thorough inspection of the associated hardware within 14 days of receipt of delivery and provide immediate contact with ABG Tag and Traq, Inc. of any omissions or defective items. ABG Tag and Traq, Inc. warrants that the equipment delivered shall accord with the Quoted materials and/or specifications but offers no other warranty.