. S2i GSM mobile phone User Manual 1
1 Prior to use Icon Explain Said SIM card a network signal strength, bar a few more stronger the signal Said SIM Card 2 network signal strength, as amended, the stronger the more the signal。 The battery capacity ,be the number of the more power the more adequate. Alarm clock opening, if the alarm set off, will not be displayed.
Silent mode 2 Function menu 3.1 Fast functional use standby mode, click the "Menu" on access to main menu interface; click on the "right soft key" to access the phonebook list interface; select numbers for direct access by dialing key on the dial-up interface。 all main menu or sub menu interface, click on the appropriate menu icon to the desired function into the options。 In the standby interface can be up and down left and right arrow keys to enter the corresponding shortcut menu.
Delete current text messages. Editor: Receive information on current editor. Transmit: Edited with an option to send to one person or group to send multi-send. Copy to phone: Copy to SIM card: does not appear。 Move to mobile Move to SIM card Chat: Y Remove all: Copy all Use numbers The sender number and the current text message number (3-40 digits) is extracted to the list displayed, select any one of which can be dial-up or save operation 3.2.1.
Select SIM card or mobile phone. 3.2.2 Multimedia message Through the MMS service, you can send voice and text contain pictures, news. z Inbox This menu allows you to view your received MMS. select a multimedia message. enter the following options (Note: MMS messages and text messages are in the same inbox view.) View: view MMS content SMS Re: reply with SMS . 3.2.3 Chat Set the number and chat. 3.2.4 Voice mail SIM card a language-mail: edit SIM card 1,voice mail numbers.
show the length of time the last phone call. Dialed a total of Display dialed the total length of time. Has a total phone. Show the total time to answer the phone the length of time. Zero all the time Records of these three with zero time. 3.3.1.6 Call Accounting Click “ok” to enter the call billing sub-menu,can view records of phone call charges to date. Last call cost View last call billing. All call charges View all calls total billing. Zero call costs.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.