RTC-1010 Rugged Tablet Computer User’s Manual 9th Ed Last Updated: September 14, 2022
Copyright Notice Rugged Tablet Computer This document is copyrighted, 2022. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Acknowledgement Rugged Tablet Computer All other product names or trademarks are properties of their respective owners. ⚫ Intel®, Celeron®, and Pentium® are registered trademarks of Intel Corp. ⚫ Windows™, Windows 10, and the Windows logo are registered trademarks of Microsoft Corporation ⚫ Bluetooth® is a registered trademark of the Bluetooth Special Interest Group (SIG) The publisher of this document does not claim nor imply ownership of product names not herein listed.
Packing List Rugged Tablet Computer Before setting up your product, please make sure the following items have been shipped: Item Quantity ⚫ RTC-1010 1 ⚫ 12V power adapter (power cord ordered separately) 1 If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
About this Document Rugged Tablet Computer This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
Safety Precautions Rugged Tablet Computer Please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. Make sure the power source matches the power rating of the device. 3. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 4. Always completely disconnect the power before working on the system’s hardware. RTC-1010 5.
Rugged Tablet Computer ii. Liquid intrusion to the device iii. Exposure to moisture iv. Device is not working as expected or in a manner as described in this manual 16. v. The device is dropped or damaged vi. Any obvious signs of damage displayed on the device DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO PREVENT DAMAGE. 17. Do not use the battery pack if any part of it is protruding or inflated.
FCC Statement Rugged Tablet Computer This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: RTC-1010 There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
China RoHS Requirements (CN) Rugged Tablet Computer 产品中有毒有害物质或元素名称及含量 AAEON System QO4-381 Rev.
China RoHS Requirement (EN) AAEON System QO4-381 Rev.
Table of Contents Rugged Tablet Computer Chapter 1 - Product Specifications ........................................................................................ 1 1.1 Specifications............................................................................................................ 2 Chapter 2 – Getting Started ................................................................................................... 6 2.1 Product Overview .............................................................
Rugged Tablet Computer A.4 Battery Disposal.................................................................................................... 38 A.5 Battery Caution..................................................................................................... 39 A.6 Adapter Caution .................................................................................................... 41 A.7 FCC Interference Statement ..............................................................................
Rugged Tablet Computer RTC-1010 Chapter 1 Chapter 1 - Product Specifications
1.1 Specifications Rugged Tablet Computer System Processor Intel® Celeron® N3350 1.1GHz Dual core up to 2.4GHz Intel® Pentium® N4200 1.1GHz Quad core up to 2.5GHz RTC-1010 Operating System Windows® 10 IOT Enterprise SAC Memory Onboard DDR3L 4GB (Default) / 8GB Storage eMMC 64GB (up to 256GB optional) Display 10.1” WXGA (1280x800) 800-nit / 300-nit TFT LCD with Projected Capacitive Multi-Touch Screen I/O Port Micro HDMI port x 1 SIM card slot x 1 microSD card slot x 1 Audio jack x 1 (3.
System Rugged Tablet Computer WWAN (Optional) LTE via Mini Card slot (Optional) Camera 2MP front camera 8MP rear camera with flash Sensors G-sensor E-compass Gyro-sensor Light-sensor Expansion Slot Internal M.2 slot x 1 (For Wi-Fi module) Mini Card slot x 1 (For LTE module) Docking connector: USB2.
Mechanical Rugged Tablet Computer Color Black & Dark Gray Dimension (W x H x D) 10.71” x 7.48” x 0.80” (272.0 mm x 190.0 mm x 20.4 mm) Gross Weight 2.2 lbs. (1.0 kg) based on configuration Environmental RTC-1010 Operating Temperature -4°F ~ 122°F (-20°C ~ 50°C) Storage Temperature -67°F ~ 158°F (-55°C ~ 70°C) Humidity 0% ~ 90% relative humidity, non-condensing Environmental Sealing IP65 Vibration MIL-STD-810G-514.6 Procedure I Cat.24, Fig 514.6E-1 & 514.
Power Supply Rugged Tablet Computer AC/DC Adapter AC 100 ~ 240 V, 50 ~ 60 Hz Output: 12V/ 3A/ 36W Battery Life Li-ion Battery 8-hour battery life based on test configurations Primary Battery Hot-swappable battery: 14.4V, 2270mAh, 32.7W Secondary Battery 7.4V, 1530mAh, 11.3W Display RTC-1010 LCD 10.1” TFT-LCD/ 16:10 with LED backlight Resolution 1280 x 800 Maximum Color N/A Dot Size 0.1692 (H) x 0.1692 (V) mm Brightness 300 nits (800 nits optional) Viewing Angle Horizontal: 170° (Typ.
Rugged Tablet Computer RTC-1010 Chapter 2 Chapter 2 – Getting Started
2.
Side View (Left) Rugged Tablet Computer RTC-1010 Function Description DC-in Jack Input: DC 12V USB3.0 Type A x 1, Type-C x 1 Audio Jack 3.
Side view (Right) Rugged Tablet Computer RTC-1010 Function Description SCR Smart card Reader COM Port RS232/422/485 GbE RJ45 USB2.
Rear View Rugged Tablet Computer RTC-1010 Function Description 8MP Camera With LED Flash Mini-card Slot For LTE module (Need to order LTE version) Battery Bay Hot-swappable Battery x 1 Chapter 2 – Getting Started 10
2.2 Notes before use Rugged Tablet Computer Before using your device, please read through the following instructions ⚫ Use only the power adapter that comes with your device. Using a different power adapter may cause damage. ⚫ The AC power cord is designed for the RTC-1010 only. ⚫ This product is intended to be supplied by a Listed Power Adapter or DC power source, rated 12Vdc, 3A minimum, Tma = 40°C. Please contact AAEON for further assistance.
2.3 Turning on the Device Rugged Tablet Computer The power button turns your device on and off. Hold the button for one second to power on. To start or wake from sleep mode, hold the power button for 0.5 seconds until the shutdown confirmation is shown. If the system remains unresponsive, press and hold the power button to force power off (may result in data loss). It is strongly recommended that the user back up important data regularly.
2.4 Touch Controls Rugged Tablet Computer Gesture Description Single Tap A single tap is used to open files or applications, or select text input areas. Long Tap (Tap and Hold) Long tapping an icon allows it to be moved freely on the screen.
2.5 LTE Module Assembly Rugged Tablet Computer RTC-1010 1. Remove the screws of the LTE module cover 2.
Remove the tape and pull up the antenna cable 4. Slide the LTE module into the socket 5. Secure the LTE module with the attached screws Rugged Tablet Computer 3.
Attach the antenna cable to the MAIN connector of the LTE module 7. Put the LTE module cover back 8. Secure the cover with screws Rugged Tablet Computer 6.
2.6 COM Port Pin Definition (RS232/422/485) Rugged Tablet Computer Serial Port Pin Definition RTC-1010 Pin No RS232 RS485 RS422 & 485 1T/1R 1 DCD DATA- TX- 2 RX DATA+ TX+ 3 TX RX+ 4 DTR RX- 5 GND 6 DSR 7 RTS 8 CTS 9 RI Note: COM Port Mode (RS232, RS422, RS485) can be set in the system BIOS. After entering the BIOS, go to the Main Menu, then select “COM PORT MODE” to change the settings.
Rugged Tablet Computer RTC-1010 Chapter 3 Chapter 3 – System Settings
3.
Main Category Rugged Tablet Computer Privacy Sub Category Location Camera Windows Update Update & Security Recovery Backup RTC-1010 Chapter 3 – System Settings 20
To enter the Settings screen Rugged Tablet Computer From Home Screen 1. Reveal the Charm Bar. RTC-1010 2.
3.1.1 System Rugged Tablet Computer Configure the Display 1. Go to Settings> System> Display RTC-1010 Change Size: Adjust the display size for text, apps, and other items (default 100%) Lock Rotation: Lock rotation of display. Turning this on will prevent the screen from automatically rotating when device is held in a different orientation. Brightness: Enable automatic adjustment of screen brightness based on input from the light sensor.
Configure Notifications Rugged Tablet Computer 1. Go to Settings> System 2. Select Notifications & actions RTC-1010 Select which notifications the system will display and whether to display on the lock screen. Applications: Enable displaying notifications from applications. Lock Screen: Enable displaying notifications on the lock screen.
Configure Apps & Features Rugged Tablet Computer 1. Go to Settings> System> Apps & features This menu allows the user to view how much memory each application is using. Apps RTC-1010 can also be moved or uninstalled from this menu. Configure Power & Sleep 1. Go to Settings> System 2. Select Power & sleep System power settings can be set here, including idle time before turning off screen or entering sleep mode.
3.1.2 Device Rugged Tablet Computer Printers & Scanners 1. Go to Settings> Devices RTC-1010 2. Select Printers & scanners. 3. You can add a printer or scanner from this menu. Manage Bluetooth Devices 1. Go to Settings> Devices> Bluetooth This screen allows the user to turn Bluetooth on or off, as well as pair with available Bluetooth devices.
3.1.3 Network & Internet Rugged Tablet Computer Wi-Fi Settings 1. Go to Settings> Network & Internet> Wi-Fi RTC-1010 2. Select the Wi-Fi network or access point you wish to connect to. 3. Type in the password and tap Connect Configure Airplane Mode 1. Go to Settings> Network & Internet> Airplane mode Enable Airplane Mode to stop all wireless communication, or select which wireless devices to disable.
Configure VPN Rugged Tablet Computer 1. Go to Settings> Network & Internet> VPN Use this screen to add or configure a VPN connection. RTC-1010 3.1.4 Personalization Settings Background/Colors/Lock screen 1. Go to Settings> Personalization Set the device’s background, colors, lock screen, theme, and Start menu settings.
3.1.5 User Accounts Rugged Tablet Computer Configure User Accounts 1. Go to Settings> Accounts RTC-1010 Use this menu to manage user accounts and settings. Note: Only accounts with Administrator privileges can manage settings for other users.
3.1.6 Time & Language Settings Rugged Tablet Computer Configuring Date & Time 1. Go to Settings>Time & Language. RTC-1010 Set the device's date and time, time zone and time format here. 3.1.7 Ease of Access Settings Accessibility Settings 1. Go to Settings> Ease of Access. Enable and configure Ease of Access utilities for system accessibility.
3.1.8 Privacy Settings Rugged Tablet Computer Change Privacy Options 1. Go to Settings>Privacy. RTC-1010 Configure privacy settings, including what information is shared with applications. 3.1.9 Update & Security Windows Updates 1. Go to Settings> Update & Security Configure Windows Update, Windows Defender and other system resources.
Rugged Tablet Computer RTC-1010 Chapter 4 Chapter 4 –Accessories
4.1 Barcode Scanner Rugged Tablet Computer The barcode scanner accessory enables the RTC-1010 to read barcodes to perform various actions. Note: the barcode scanner does not ship with any software or SDKs. Perform the following test to check if the scanner is working: 1. Open the Notepad application 2. Scan a barcode 3.
Rugged Tablet Computer RTC-1010 Appendix A Appendix A - Statements
A.1 Statements Rugged Tablet Computer Declarations and Safety Statements Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not be co-located or operating in Rugged Tablet Computer conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
A.2 Canadian Notice Rugged Tablet Computer IC Regulations This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
A.3 Safety Caution Rugged Tablet Computer Important Safety Instructions Power Safety Requirement Products with electrical current ratings up to 3A and weighs more than 1 Kg must use approved power cords greater than or equal to: VCTF, 3G or 0.75mm 2.
voisinage de la fuite Rugged Tablet Computer ⚫ Utiliser seulement le cordon d’alimentation et la batterie indiqués dans le manuel. Ne pas jeter les batteries dans le feu. Elles pourraient exploser. Vérifier les dispositions locales de recyclage. A.4 Battery Disposal There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. RTC-1010 Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect.
A.5 Battery Caution Rugged Tablet Computer There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions. 1. User Manual Read user manual before using the battery pack.
5. Charging Method Rugged Tablet Computer If using a charging dock or accessory, please read the user manual for the charger before use and follow the recommended charging methods in that manual. 6. First Time Use If you are using a battery pack for the first time and notice rust, bad smell, or something abnormal (ex: inflated), DO NOT USE the battery pack. Contact the vendor for immediate replacement. 7.
10. Do not use the battery pack if any part of it is protruding or inflated. Replace with a Rugged Tablet Computer new battery pack immediately. 11. If the battery pack cannot be charged (won’t hold a charge, system is unable to charge it), replace the battery pack with a new one immediately. 12. AAEON suggests replacing the battery pack after one year to ensure consistent performance of your rugged tablet device. RTC-1010 A.6 Adapter Caution This RTC is for use with model NO.
A.7 FCC Interference Statement Rugged Tablet Computer This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT NOTE: Rugged Tablet Computer Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. A.
