AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: O PAGE: 2 of 19 Table of Contents 1.0 Description and Application ............................................................................................. 4 1.1 Description .................................................................................................................. 4 1.2 Application .............................................
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: O PAGE: 3 of 19 7.5 CE Notice ................................................................................................................... 17 7.6 OEM Labeling Requirements ...................................................................................... 18 7.7 CE Compliance Power Settings ......................................................
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: 1.0 Description and Application 1.1 Description O PAGE: 4 of 19 AT2530 module is based on the TI CC2530 ZigBee compliant SOC IC. The IC is a 2.4GHz, IEEE 802.15.4 compliant transceiver with an industry-standard enhanced 8051 MCU, 256 KB of flash and 8 KB of integrated RAM memory. The module is 14.9mm x 21.9mm x 2.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: 2.0 Mechanical Specifications 2.1 Module Dimensions (mm) O PAGE: ± 10.1 21.9 0.1 3.0 30 0.7 42 8.0 14.9 0.1 1.0 45 5 of 19 ± Pin 1 4 1.0 1.0 PITCH 16 0.95 0.7 Bottom View Top View 2.65 max 1.
AT2530 NO. Module Specification Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 ISSUE: O PAGE: 6 of 19 Module Footprint Top “see through” view (mm) 1.0 1.0 8.0 6.5 7.45 7.95 6.5 7.45 7.95 Figure 3: Module Footprint 11.45 10.95 10.0 1.0 Pitch 10.95 0.70 0.7 2.2 May 2013 10.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 2.3 May 2013 ISSUE: O PAGE: 7 of 19 Recommended Main PCB Copper Ground Design (Only applicable to module with internal antenna) 15.0 13.0 12.0 0.75 5.5 21.9 31.0 14.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 2.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 36 37 38 39 40 41 42 43 44 45 46 May 2013 P0_1 P0_0 RESET_N GND GND GND GND GND GND GND LGA pad ISSUE: O PAGE: 9 of 19 Digital I/O Digital I/O Digital Input GND GND GND GND GND GND GND Port 0.1 Port 0.0 Reset, active-low Ground Ground Ground Ground Ground Ground Ground RF TX/Rx Antenna connection.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: 3.0 Electrical Specifications 3.1 Absolute Maximum Ratings PARAMETER Supply voltage, VDD 3.2 PAGE: Min -0.3 -0.3 Voltage on any digital pin Input RF level Storage Temperature O Max 3.9 VDD+0.3, ≤ 3.9 Unit V 10 85 dBm MAX 2 500 3 UNIT kV V Max 3.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 3.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 3.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: O 4.0 Assembly Information 4.1 Lead-Free soldering reflow profile PAGE: Condition Exposure Average ramp-up rate (200°C to 250°C) < 3 °C / second > 217°C 60-120 seconds Peak temperature 250 +0/-5°C Time within 5°C of peak 20-30 seconds Ramp-down rate (Peak to 50°C) Less than 6°C / second Table 8: Reflow Profile Recommendation 5.0 No.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: 6.0 Packaging Information 6.1 Tape and Reel specification O All dimensions in mm 6.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 6.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 7.0 Regulatory Information 7.1 FCC Notice ISSUE: O PAGE: 16 of 19 This module complies with Part 15 of the FCC rules and regulations. Compliance with the labeling requirements, FCC notice and antenna usage guideline is required. The OEM must comply with the following regulations: 1.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: O PAGE: 17 of 19 To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operation at closer than this distance is not recommended.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 7.6 May 2013 ISSUE: O PAGE: 18 of 19 OEM Labeling Requirements 1. The CE conformity marking must consist of the initials CE taking the following form: If the CE conformity marking is reduced or enlarged the proportions given in the above graduated drawing must be respected 2.
AT2530 NO. Module Specification TITLE: Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD REVISION DATE: 22 May 2013 ISSUE: O PAGE: 19 of 19 Channel 11-26 AT2530 +4.5dBm Table 16: Maximum Power Settings for Europe (ESTI) 8.0 RoHS Declaration Based on our supplier declarations, this product does not contain substances that are banned by Directive 2002/95/EC or contains a maximum concentration of 0.