User's Manual

ManualsBrandsA2Z Development Center ManualsComputers & AccessoriesTablet

User Manual

INSIDE THE BOX

 Device

 Power adaptor

 USB Cable

CONNECTING DEVICE

1. To turn on your device, press and release the power button. To put it in sleep mode, press and

release the power button.

2. To turn off your device, press and hold the power button until a message displays asking if you

want to shut down.

3. Your device will be partially charged when you receive it. To charge your device, connect one

end of the USB cable into your device and the other end into the power adapter (included).

4. Connect the power adapter into a nearby power outlet.

CONNECTING DEVICE TO YOUR HOME NETWORK

Tap the quick setting icon located on the status bar to display settings for the most commonly

performed tasks

Select wireless network to toggle wireless on or off, display a list of detected Wi-Fi networks, add a

network, and access advanced wireless settings.

REGISTERING YOUR DEVICE

To use many of the device features, you must register it to your account. If you have not yet registered,

please do so now. Prior to registering, connect to a Wi-Fi network by tapping the Quick Setting icon at

the top of the device, then Wi-Fi. Select the network you want to use. Once you are connected, tap the

Quick Settings icon, then more, and select the My Account option to register.

Summary of content (7 pages)

PAGE 1
User Manual INSIDE THE BOX    Device Power adaptor USB Cable CONNECTING DEVICE 1. To turn on your device, press and release the power button. To put it in sleep mode, press and release the power button. 2. To turn off your device, press and hold the power button until a message displays asking if you want to shut down. 3. Your device will be partially charged when you receive it.
PAGE 2
Product Information Safety and Compliance Information Using Your Device Around Other Electronic Devices The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
PAGE 3
Product Specifications Equipment Name: Tablet Model: K29A5E Ports: Micro-USB, Audio port Power —DC 5.25V, 1.0A or DC 5.2 V, 1A output power adapter (sold in-box) Operating Voltage – 3.4V to 4.2 VDC Connectivity — Dual Band Wi-Fi (2.4 GHz&5 GHz); 802.11a/b/g/n; BT 3.0, BLE 4.2 Operating frequency — WLAN 2.4GHz: 2402 - 2480 MHz; WLAN 5GHz: 5150~5825MHZ; Bluetooth 3.0 / 4.2: 2402 – 2480 MHz RF Power: Wi-Fi 2.4G— 16.58 dBm; Wi-Fi 5G B1: 13.30 dBm; Wi-Fi 5G B2: 13.01 dBm Wi-Fi 5G B3: 13.38 dBm ;Wi-Fi 5G B4: 13.
PAGE 4
CE SAR Compliance CE Radio Frequency Exposure Compliance. The device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by the way of health protection. Recycling In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Device in accordance with your local laws and regulations. CAUTION: Danger of explosion if battery is incorrectly replaced.
PAGE 5
ISED Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ISED RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 6
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
PAGE 7
Supplier’s Declaration of Conformity. 47 CFR 2.1077 Compliance information Responsible Party: A2Z Development Center, Inc.