MyM-3S Micro Master Installation Guide English design for TV 1
CONTENT 1. 2. 3. 4. 5. 6. 7. 8. 9. Introduction Unpacking the unit Connections and indications IP settings Menus and settings 5.1 Overview menu 5.2 Input settings 5.3 Output settings 5.4 Service management 5.5 CI menu 5.
1 Introduction Thank you for purchasing an A2B Electronics product. The MyM-3S is a revolutionary solution for reception and modulation of satellite transmitted TV-content into an analogue format suited for small SMATV networks where cost efficiency and high quality is required. The MyM-3S receives DVB-S and DVB-S2 transmissions.
2 Unpacking the unit The following items are included in the package: Amount 1 1 2 Description MyM-3S Micro Master Installation guide Power supply 12 V Every unit is quality controlled by us before delivery. Should any items be missing when unpacking, please contact our support service (see page 3 for contact info). Important information about power supply to MyM-3S unit To avoid problems with theMyM-3S its is important to use the supplied power supply.
3 Connections and indications 8 1 2 3 4 5 6 7 1. Satellite input 1 Connect one satellite (LNB) input here 2. Satellite input 2 Connect second satellite (LNB) input here 3. Power connector Connect the supplied power supply to this connector 4. Common Interface 1 Insert a Common Interface module into this slot (Supports decryption for Channel 1 and 2) 5. Common Interface 2 Insert a Common Interface module into this slot (Supports decryption for Channel 3) 6.
4 IP settings The MyM-3S has an embedded web server allowing standard web browsers (Internet Explorer, Firefox, Opera etc.) to connect to the unit for settings and management. No controller software is needed. The MyM3S has by default a static IP address for connecting your PC to the unit. The MyM-3S is delivered with the default IP address: 192.168.0.20. First time installation requires that you set a static IP address on your computer. For example set your PC to IP address: 192.168.0.19 and Net mask: 255.
4 IP settings (continued) Select [Use this IP adress] and write: 192.168.0.19 and select [Net mask] 255.255.255.0. Click [OK] and then click [Close]. NOTE! For PC with other Operating Systems (OS) than Windows, please consult the Owners manual for your PC for [IP/Network settings]. Connecting your PC to the MyM-3S Connect the MyM-3S to the supplied DC power supply. See section 6 for installation. Next connect your PC to the MyM-3S with a network cable.
5 Menus and settings All necessary settings can be made in the web GUI via a web browser. When first connection is made with the MyM-3S following overview menu will appear. 5.1 Overview menu [Current settings] Contains information of current input and output signals, if the tuners are locked to a signal, firmware version, bootloader version, hardware revision, serial number and current IP Network settings. [Software options] In this menu you can see which software options that are activated.
5 Menus and settings (continued) 5.2 Input settings As the MyM-3S contains 2 separate tuners, start by selecting either [Tuner 1] or [Tuner 2]. Select the modulation type you want to receive. By selecting DVB-S2 you also can select between QPSK, 8PSK or 16 QAM. Set the Polarisation. Voltage, FEC and 22 kHz tone should normally be set to “Auto” if you have connected the MyM-3S to a Universal LNB or a switch with same functionality as a Universal LNB.
5 Menus and settings (continued) 5.3 Output settings Modulation/ Band Start the output setup by selecting which band you want to use. You can select VHF-7, VHF8 and UHF. VHF-7 and VHF-8 corresponds to 7 and 8 MHz bandwidth. After selection press [Set]. Frequency For each of the 3 possible output channels, set the desired output channel or frequency. Channel Indicator Name You can set the “Channel Indicator name” by your personal preference.
5 Menus and settings (continued) 5.3 Output settings continued Auto conversion Converts subtitling to fit actual picture aspect ratio. Teletext Charset Select appropriate characters for selected language. Audio/ Audio language Select which language to receive and transmit on the outgoing programs. Audio level This setting allows to equalise the difference in sound level between different programs. Settings can be done between +3 and -9 dB or Mute.
5 Menus and settings (continued) 5.4 Service Management The MyM-3S contains 2 separate DVB-S/S2 tuners and totally 3 services can be selected for each of output channels, named [CH-1], [CH-2] and [CH-3]. The list of services presents all received services from both tuner inputs. When one program (service) is selected, the box in front of the program name changes colour to green.
5 Menus and settings (continued) 5.6 System options Upload/Upgrade The Upgrade menu is used to be able to download software Upgrades or future software functionality. The procedure of downloading a new software looks as described below: 1.Download the appropriate file from our web page to your PC. 2.Browse for the file in the MyM-3S User Interface. 3.Press [Upload] 4.Wait 2 minutes. 5.Make a reboot of the MyM-3S 6.
6 Installation and configuration The MyM-3S can be installed either as a stand alone unit directly on the wall or by the use of a dedicated MyM Security Wall Mount (part number 702800.10). The MyM Security Wall Mount secures both the MyM and CAM-modules with a locking function to avoid loss of CAM’s and smart cards in public places. Before connecting power to the MyM-3S, make sure that all other connections have been made.
7 Technical specification MYM-3S 2 x DVB-S/S2 Satellite Receiver Miscellaneous Input frequency Symbol rate Connectors Input level LNB voltage LNB current 22kHz to LNB FEC AC Power supply AC power consumption DC output power DC power consumption Ethernet port Setup Dimension 950 - 2150 MHz 1-45 Msymbols/s Type F female, 75 Ω -65 to -25 dBm Auto, off or 13/18V 200 mA per input Auto, on or off Auto 3 x MPEG Decoder – Video - audio Video standard Audio standard Picture aspect ratio Teletext Subtitling Wei
8 Declaration of Conformity The document for Declaration of Conformity is available for download from www.a2b.se. Further information at www.a2b.se.
9 Abbreviations DVB Digital Video Broadcasting (Standardization body) MPEG-2 Compression format for digital TV MPEG-4 Compression format for digital TV (SD and HD) DSB Double Side Band (RF modulation occupying 2 channels) NICAM Digital sound format for analogue TV transmission IP Internet Protocol (defines how data is packetized for Internet broadcast) DVB-S Modulation format (QPSK) for satellite transmission of digital TV DVB-S2 Modulation format (QPSK or 8PSK) for satellite transmission of
Notes 18
Notes 19
A2B Electronics AB Södra Allén 23-25, 591 37 Motala P.O. Box 14, 591 21 Motala SWEDEN Phone +46 141 229100 Fax +46 141 229101 E-mail market@a2b.se 652813.01 rev A FW2.0 To view our full line of Professional Products, visit our Web site www.a2b.se www.a2b.