OVERVIEW b-VibeTM products are made with silky smooth, bodysafe silicone. Our products are phthalate-free and latex-free. The easy to use interface allows users to easily reach your desired stimulation and intensity level. Get ready for sensual satisfaction that can not be matched and will have you craving for more.
RIMMING PLUG Internal Stimulator WIRELESS REMOTE CONTROL Base Control Button Vibration Function Button Magnetic Charging Contact Power Button Decrease Intensity/ Rotation speed Rotation Button Rimming Beads LED Indicator 4 Increase Intensity/ Rotation speed 5
GETTING STARTED 1. Before first use, charge your plug for approximately 2 hours. The USB charging cable can be plugged into any USB port or USB/AC power adapter (not included) 3. Lubricate your plug with a water based, silicone compatible lubricant. • Flashing Light = Charging The light will flash, indiciating the power is on and in standby mode. 4. Turn ON your plug by pressing quickly at the bottom of your plug.
MANUAL CONTROL 5. To change the vibration intensity and/or rotation speed via the base control, press the A .To change the vibration intensity and/or rotation speed via the remote control press and release the A and the A 1. To turn the item ON quickly press The will flash to indicate the power is on. Push again to change the vibration pattern. There are a total of 8 modes using the manual control. 2. To power OFF your plug press and hold for 2 seconds. LED will turn off to indicate the power is OFF. 5.
REMOTE CONTROL 1. First turn your plug on in standby mode by quickly pressing on your plug. 2. While the baselight is flashing, power on your remote to pair the remote & plug. 3. Once the item is paired the base light will become solid and you can control your plug by remote. 4. Press and release to increase vibration intensity and/or rotation speed. 5. Press and release to decrease vibration intensity and/or rotation speed 10 6.
CHARGING YOUR PLUG CHANGING YOUR REMOTE CONTROL BATTERY • Attach the magnetic charging plug to the designated charging area on the base of the product • Slide open the remote control battery compartment as shown. • Flashing light indicates item is charging • Button cell CR 2032 has been preinstalled into the remote control. • Solid light indicates item is fully charged • Plugs require approximately 2.
TRAVEL LOCK • All b-Vibe items include travel lock for safe and convenient travel VIBRATING MODES 23 1 For the remote: Simultaneously press and hold the and buttons for 3 seconds. Flashing light will indicate the item is locked. To unlock simply press and hold and again for 3 seconds. Flashing light will indicate lock is disabled. Rimming Beads Internal Stimulator 1. Low 1. Low Vibration 2. Speed II 3. High Vibration 23 1 45 3. Speed III 4. Maximum Vibration 4. Speed IV 5.
b-Vibe Care Cleaning, Storage & Safety TOY CLE A NER 1. Always clean your plug thoroughly before and after each use. 4. Avoid leaving your plug in direct sunlight and never expose it to extreme heat. 2. We recommend premium waterbased lubricant. Silicone-based lubricants are not recommended and can cause damage to the product. 3. To properly clean your plug, wash with luke-warm water and a respected antibacterial soap. Rinse clean and pat dry using a lint-free cloth or towel.
SPECIFICATIONS Materials Body Safe Silicone/ ABS Size 151 x 79 x 41 mm Weight DISPOSAL INFORMATION Use Time 1.5 hours Max Noise Level < 68 dB Interface 197 g Single Button Manual Control Battery Battery li-ion 550m-Ah 5 Button Remote Control Charging 1.
R&TTE STATEMENT: Declaration of Conformity However, there is no guarantee that interference will not occur in a particular installation. Hereby, b-Vibe declares that this Rimming Plug product is in compliance with essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of conformity can be found at www.bvibe.
Complete user instructions in additional languages and FAQ can be found at: www.bvibe.com Email us at customerservice@bvibe.
bvibe.