G6 Saver Wireless Optical Mouse User’s Guide Mouse Model:G6-70D Dongle Model:RG-20M www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Knowing the mouse 2.4GHz wireless technology with 16 channels and 1,048,576 ID Errorless 2-Way Communication Technology Codes The 2.4GHz RF wireless technology is fine-tuned with 16 selected Errorless 2-way communication technology features error channels and exclusive 1,048,576 ID-codes; it offers precise and correction capability that speeds up data transmission and smooth wireless operation in active wireless environments. It allows increases wireless precision.
Wireless Range Any electrical device, such as the computer monitor, Zip drives, speakers, etc., can cause interference with the wireless mouse. Most likely, this will effect tracking of pointing devices or the range of the device. To make sure that your mouse transmits and receives properly, refer to the following instructions: 1. For optimal performance, place the receiver at least 8 inches (20 centimeters) away from other electrical devices, such as the computer monitor, Zip drives, speakers…etc.
Hardware Installation Step 1: Inserting the Batteries A. Press the tab on the battery cover B. Insert the supplied batteries, making sure that the locates on the mouse bottom as positive (+) and negative (-) ends of the battery shown here and remove the cover. match the polarity indicators inside the battery C. Slide the batter cover back into its position until it “clicks” firmly into place. housing. Step 2: Connect the Receiver A. For Notebook computer: A.
B. The USB receiver will automatically be recognized by your computer. C. Press the “connect” button on the USB receiver as shown, the Green Power LED will light up, and starts “Blinking”. D. Immediately Press the “connect” button on the bottom of the mouse, If you can’t find or see your cursor on the screen, follow the steps below: 1. Unplug and re-plug the receiver 2.Test the device on another USB port or computer. 3.
Installing 2X-Office Software Note: The driver is applicable to Windows 2000, XP, MCE2005, XP (x64), 2003(x64) and VISTA x86. A. Before installing the 2X-Office, uninstall any previous mouse driver. B. Insert the enclosed 2X-Office driver (CD) to start installation. Then you’ll see a “Figure C” pop up (shown as the below figure). >>Click “Install driver” of the 2X-Office software to install the driver. C.
Step 2: Programming the mouse buttons 1. Double click on the mouse icon “ ” will bring you the mouse properties (as shown on the left). 2. If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then you have successfully installed the 2X-Office driver.
easily changed by one click on the 6th Office Jump button. Step 3：Using the “Office-Button Options” There are 2 ways to open the “Office-Button” menu (right) A: Click the “Office-Button Option” in B: Click 6th Button located on the mouse and C: Now, there are 24 selections in the the Mouse Properties. it will bring you the “Office-Jump menu” (as “Office-Button” menu totally. You may choose below figure) >> click the “A4” logo on 8 selections at a time in maximum. Office-Jump menu.
Step 4: Experiencing the mouse with different applications When you are in Microsoft Outlook After selected Office command set No.5 - Delete-Reply All . You can press 6th button to delete all garbage mail, or you can press 7th button to reply all. By using Office 8K Mouse, you can instantly read all your email messages and manage your outlook in a second. Or you can select No.15 - Zoom In- \Zoom out to enlarge your email font size to match your eyesight needs.
● System Requirements： ● Package Includes： To use the mouse presenter, your computer must meet the following hardware requirements and run □ 2.4GHz RF Mouse one of the operating system listed below.
