G6 Saver 2.4G RF Mouse User’s Guide Model: G6-20D www.a4tech.
Knowing the mouse 2.4GHz wireless technology with 16 channels and 1,048,576 ID codes Errorless 2-way communication technology The 2.4GHz RF wireless technology is fine-tuned with 16 selected channels Errorless 2-way communication technology features error and exclusive 1,048,576 ID codes; it offers precise and reliable wireless correction capability that speeds up data transmission and operation in the busy wireless environments. It allows many wireless increases wireless precision.
Hardware Installation Step 1: Inserting the Batteries A. Press the tab on the battery cover B. Insert the supplied batteries, making sure that the locates on the mouse as shown here positive (+) and negative (-) ends of the battery match and removes the cover. the polarity indicators inside the battery housing. C. Slide the batter cover back into its position until it “clicks” firmly into place. Step 2: Connect the Receiver For notebook computer: A.
C. Press the “connect” button on the USB receiver as shown, the Green Power LED will light up, and starts “Blinking”. D. Press the connect button on the bottom of the mouse. >> Now, you should be able to use the mouse. E. If you can’t find or see your cursor on the screen, follow the steps below: 1. Unplug and re-plug the receiver 2. Test the device on another USB port or computer. 3. Some surfaces may “trick” the optical sensor, such as reflective surfaces like glass or mirrors.
Wireless Range Any electrical device, such as the computer monitor, Zip drives, speakers, etc., can cause interference with the wireless mouse. Most likely, this will affect tracking speed or the working range of the device. To make sure that your wireless mouse transmits and receives properly, refer to the following instructions: 1. For optimal performance, place the receiver at least 8 inches (20 centimeters) away from any other electrical devices, such as the computer monitor, Zip drives, speakers…etc.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
