User Manual 16-in-One Software G3-290N www.a4tech.
About "16-in-One" software Consists of value-added functions, such as: Multi-link management, DPI / report rate setting, 4-way wheel, power-saving management, battery status indication, etc. Best software for your every need! Define the Mouse Buttons " at the system tray 1. Double-click the icon " to open the “Main Menu”. 2. Select the function you preferred for each button from the pull-down function list. 3. Store and apply the setting by clicking "Apply". 4. Click “Exit”.
Setup Box Example: Using as “Zoom In” by default, just press/hold the gesture RIGHT button and draw a line as shown below, and then release the button, the picture or the document will be zoomed in immediately. a. Press/hold the gesture RIGHT button arrow direction b. Draw the line as the c. Release gesture RIGHT button Then the picture has been zoomed in.
Change the Mouse Wheel to 4-way Wheel Click the icon at the system tray and select "4-Way Wheel Settings". a. The 4-way Wheel splits the working screen into 2 areas A and B as shown on the right. When the cursor locates in area A, the wheel will perform vertical scrolling; when the cursor locates in area B, the wheel will perform horizontal scrolling b.
Connect New Mice/KBs The multi-link receiver can link to 3 sets Mice/KBs for specified applications, such as presentation, meeting or teaching. Please follow the steps to finish the ID pairing of the new mice/KBs. 1) Click the icon " " at the system tray and select "Multi-link Technology". 2) Follow the on-screen instructions to finish the ID pairing and manage the paired devices. Power-saving Management 1. Click the icon at the system tray and select “Power Management ".
2. Click "Battery Indicator" to see the battery power status. 3. Low battery informs will pop up at the right corner of your screen when battery low.
Additional tasks of G7 16-in-One Click the icon at your system tray, the full task list of 16-in-1 will pop up as shown below: Auto Launch on Boot If this task is selected, 16-in-1 will auto-execute when the system boots up. Mouse-Control Panel Open "Mouse Properties" of your Windows system, e.g., you may setup mouse pointers and other often-used mouse settings.
Notice: To ensure a good wireless connection, please read below instructions for your reference: If the wireless mouse is not working smoothly due to wireless conflicts, try below methods to get improvement. A) Please plug the Multi-link receiver into of B) to avoid shielding wireless signal instead . Use USB extension cable to position the Multi-link receiver at a distance to prevent electromagnetism interference from devices. Troubleshooting & FAQ If the mouse is not working: 1.
